i-Pix Satellite Bedienungsanleitung
JAN 2009 RELEASE
!
!
!
!
!
!
!
!
!
!
!
!
!
USERS MANUAL
contents
INTRO, RIGGING, SET UP & MODES .
OPERATING INSTRUCTIONS .
APPENDICES .
THE SATELlITE.........................................................................................................................................page 6
RIGGING..................................................................................................................................................page 7
SET UP.....................................................................................................................................................page 8
MODES....................................................................................................................................................page 9
STAND ALONE FUNCTIONS...................................................................................................................page 10
STORING A DMX INPUT AS A MEMORY................................................................................................page 10
CREATING A MEMORY............................................................................................................................page 11
RECALLING A MEMORY.........................................................................................................................page 14
CREATING A CHASE...............................................................................................................................page 15
THE TECHNICAL STUFF .
TECHNICAL SPECIFICATIONS ..............................................................................................................page 17
UNIT DIMENSIONS DRAWING...............................................................................................................page 18
TROUBLE SHOOTING............................................................................................................................page 19
APPENDIX 1 ROHS COMPLIANCE AND WEEE DIRECTIVE INSTRUCTIONS......................................page 21
APPENDIX 2 SERVICE CONTACT DETAILS...........................................................................................page 23
APPENDIX 3 PRODUCT RANGE............................................................................................................page 24
SAFTEY FIRST.........................................................................................................................................page 3
SATELLITE USER MANUAL PAGE 2
SAFTEY FIRST
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing the BB4
The following symbols are used to identify important safety information in this manual:
Warning!
Safety hazard.
Risk of severe
injury or death
.
Warning!
LED light
emission. Risk
of eye injury.
Warning!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
Warning!
Fire hazard.
! Read this manual before installing, powering or servicing the fixture, follow the
safety precautions listed below and observe all warnings in this manual. If you
have questions about how to operate the fixture safely, please contact I-Pix
Warning! Class 2M LED product. Do not look into the beam from a distance
of less than 40 cm (16 inches). Do not stare into the beam for extended
periods at a short distance. Do not view the beam directly with optical instruments.
This product is for professional use only. It is not for household use.
This product presents risks of severe injury or death due to fire hazards, electric
shock and falls.
SATELLITE USER MANUAL PAGE 3
PROTECTION FROM ELECTRIC SHOCK
Shut down power to the entire installation at the building’s main power distribution
board and lock out power (by removing the fuse for example) before carrying out any
installation or maintenance work.
Disconnect the fixture from AC power before removing or installing any cover or part
and when not in use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault (earth-fault) protection.
Connect this fixture to AC power either using the supplied power cable or via 3-
conductor cable that is rated minimum 20 amp, hard usage. Suitable cable types
include ST, SJT, STW, SEO, SEOW and STO.
The voltage and frequency at the power outlet are the same as the voltage and
frequency applied to the power inlet. Only connect devices to the power outlet that
accept this voltage and frequency.
Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
Do not use the fixture if the power cable or power plug are in any way damaged,
defective or wet, or if they show signs of overheating.
PROTECTION FROM FIRE
Do not attempt to bypass thermostatic switches or fuses. Replace defective fuses
with ones of the specified type and rating only.
Provide a minimum clearance of 0.1 m (4 in.) around fans and air vents.
Do not modify the fixture
Apart from I-PIX accessories do not stick filters, masks or other materials directly
onto the light.
SATELLITE USER MANUAL PAGE 4
PROTECTION FROM INJURY
Do not hang fixtures from each other. Use two OMEGA clamps per fixture or I-PIX
SINGLE or DOUBLE YOLKS when suspending.
When suspending the fixture, ensure that the structure and all hardware used can
hold at least 10 times the weight of all devices suspended from them.
Use two secondary attachments (such as a safety cable) to secure each fixture.
Secondary attachments must be able to hold at least 10 times the weight of all
devices suspended from them and must be installed as described in this manual.
Check that all external covers and rigging hardware are securely fastened.
Block access below the work area and work from a stable platform whenever
installing, servicing or moving the fixture.
The LED emission presents a hazard to eyesight at a distance of 4 - 40 cm (1.6 - 16
inches) when the eye is exposed to the beam for longer than 0.25 seconds.
Do not look at LEDs from a distance of less than 40 cm (1 ft. 4 in.) without suitable
protective eyewear.
Do not look at LEDs with magnifiers or similar optical instruments that may
concentrate the light output.
SATELLITE USER MANUAL PAGE 5
!
!
!
!
!
!
!
!
!
!
!
!
!
The I-pix Satellite unit is based on proven LED lighting techniques, but it
incorporates substantial improvements due to the use of modern digital technology
involving microprocessor base controls and PWM (pulse width modulation) switching. This
gives the unit ultra smooth dimmer response, an easy-to-read LCD user interface, easy
address and set up functionality, plus the added benefit that users can utilise the onboard
software to create their own internal chase sequences when used in stand alone mode.
Good functional design ensures that the Satellite is a very competitive and versatile
unit with features that make it easy to use and set-up. For ease of operation, compatibility
and versatility the Satellite can be set into either 3,5 or 6 channel modes when it is to be
controlled by an external DMX source, depending on the complexity, functionality and
circumstances of the particular lighting situation, making the unit the ideal choice for most
general wash lightning applications.
* Even though the Satellite is extremely easy to set-up and use, as a product it is aimed at
lighting professional. Thus for the purposes of this manual it is assumed that users have a
basic understanding of lighting technologies like DMX etc.
SATELLITE USER MANUAL PAGE 6
RIGGING
ALWAYS secure the lamp to the truss, pipe e.t.c. with a safety bond.
The Satellite has 2 safety points to which a bond can be attached.
One is at the bottom of the lamp near the user interface shown in fig 1
the other is at the top of the lamp next to the input cable shown in fig 2
The Satellite is a very
simple light to rig all that is
necessary is to bolt your
clap of choice to the yoke
obviously selecting one
that is well capable of
taking the weight of the
light and then using at
least one safety bond
attached to one of the 2
safety points.
If you are using the lens
cap make sure you secure
the safety bond to the
second safety point
fig 1
fig 2
SATELLITE USER MANUAL PAGE 7
SET UP
1 select appropriate dimmer curve
The Satellite offers a choice of two dimmer curves.
1 LINEAR - the output increases directly with dmx input.
2 ENHANCED - the first 10% of the output is controlled over the first 50% of the DMX input.
Then select the appropriate dimmer curve.
First press the button above the MENU legend.
2 select appropriate mode
The Satellite offers a choice of two operating modes.
Both of which are described in detail below.
To select a mode
Keep the button below the MODE legend depressed
and go through the modes.
Stop just before your desired one,then press once.
3 select appropriate address
First press the button above the ADDR legend
Then change the address using the 100s,10s & 1s buttons
SATELLITE USER MANUAL PAGE 8
MODES
The Satellite has 2 different operating modes
To suit different uses, programming styles and dmx configurations
MODE 1 3 channels 8 bit
The most simple, ideal for fast programming or limited dmx line space
All 7 cells are treated as 1 with the 3 channels red, green & blue affecting the whole lamp
ch1 - red
ch2 - green
ch3 – blue
MODE 3 5 channels 8 bit
ideal for fast programming or limited dmx line space with overall dimming & strobe control
All 7 cells are treated as 1 with the 5 channels dim, strobe, red, green & blue affecting the whole lamp
ch1 - master intensity
ch2 - strobe
ch3 - red
ch4 - green
ch5 - blue
SATELLITE USER MANUAL PAGE 9
Stand alone functions
The Satellite is able to run in a stand alone mode without any need of data from a lighting desk.
The light is capable of outputting up to 20 programmable memories and 1 chase that steps through these memories.
“The light must be in MODE 3 (5ch) for all the stand alone functions to work.”
Storing a DMX Input as a Memory
However if you have access to a lighting desk a quick and easy way to create multiple or complex
memories is to give the light the desired colour information using a lighting desk or similar DMX
generating device and use the STORE function.
1 Connect the light to the desk in the usual way making sure the address is correct and the lamp is in MODE 3.
2 Create the desired colour on the lighting desk.
3 Press the button underneath the STORE legend once.
4 You should then assign this memory a number using the
UP, DOWN button
5 When you are happy this memory has been numbered correctly press the
STORE button wait 3 seconds and the display will return to the main menu.
SATELLITE USER MANUAL PAGE 10
Inhaltsverzeichnis
Andere i-Pix Leuchte Handbücher
Beliebte Leuchte Handbücher anderer Marken
Emos
Emos CLASSIC ZY1431T Bedienungsanleitung
Westinghouse
Westinghouse Outdoor Lighting Fixture Bedienungsanleitung
Hedler
Hedler C 12 silent Bedienungsanleitung
Blizzard Lighting
Blizzard Lighting Puck: CSI Bedienungsanleitung
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Bedienungsanleitung
Lightmaxx
Lightmaxx Shaft 5R Bedienungsanleitung
Cooper Lighting
Cooper Lighting Halo L3232E Bedienungsanleitung
Stageline
Stageline ODW-2410RGBW Bedienungsanleitung
Light Sky
Light Sky Tornado Series Bedienungsanleitung
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung
Lightolier
Lightolier Lytespan 83ED17S Bedienungsanleitung
Lightolier
Lightolier Calculite CS8226 Bedienungsanleitung