USB 2.0 All- in-1 Card Reader
1
Driver Installation Mac OS
Driver Installation for MacTM OS 8.6 & 9.0
Step 1ΚDouble click on the “MacOS / 8.6-9.0” folder.
Step 2ΚClick on “Installer” in the folder.
Step 3ΚRestart the computer.
Driver Installation for MacTM OS 9.0.4 or later
Step 1ΚDouble click on “Mac OS\ 9.0.4 or later” folder
Step 2ΚClick on “Installer” in the folder.
Step 3ΚRestart the computer.
Driver Installation for MacTM OS X 10.1.2 or later
This USB 2.0 All-in-1 Card Reader is driver-free for Mac
OS X 10.1.2 system, you don't have to install any driver,
just connect card reader to the computer directly. Mac OS X
10.1.2 will detect and install all the associated files
automatically.
Hardware Setup Mac OS
1. Connect USB 2.0 All-in-1 Card Reader to computer’s
USB port.
2. Insert the memory card to the slot, the drive icon will
appear on the desktop, all procedures may be
manipulated as a Mac TM Hard Disk.
3. To change memory cardsΚ
Drag and drop the drive icon you wish to change into the
trashcan. Remove existing memory card, and insert a new
card you wish to use into USB 2.0 All-in-1 Card Reader, a
new driver icon will appear in few seconds. All procedures
may be manipulated again as a MacTM HardDisk.
4. To disconnect USB 2.0 All-in-1 Card Reader:
Drag and drop all drive icons into trashcan, and unplug
USB 2.0 All-in-1 Card Reader from the computer to
disconnect.
7
