I-Tech EMCM1900HB-V2 Bedienungsanleitung

User’s

ManuaO

MODEL: EMCM1900HB-V2

i-Tech Company LLC

EMAIL: [email protected] • WEB: www.iTechLCD.com Modified: 10-06-2022

AD Board Specification

Panel Specification

Safety Instruction

Product Installation

Contents

General Description

Optical Specifications

Absolute Maximum Ratings

Electrical Specifications

Trouble Shooting

Safety Instruction

Read and follow these instructions when connecting and using your LCD monitor:

Operation:

1. Keep the monitor out of direct sunlight and away from stoves or any other heat

source.

2. Remove any object that could fall into ventilation holes or prevent proper cooling

of the monitor＇s electronics.

3. Do not block the ventilation holes on the cabinet.

4. When positioning the monitor, make sure the power plug and outlet are easily

accessible.

5. If turning off the monitor by detaching the power cable or DC power cord, wait

for seconds before attaching the power cable or DC power cord for normal

operation.

6. Do not subject the LCD monitor to severe vibration or high impact conditions

during operation.

7. Do not knock or drop the monitor during operation or transportation.

Maintenance:

8. To protect your display from possible damage, do not put excessive pressure on

the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the

monitor by placing your hand or fingers on the LCD panel.

9. Unplug the monitor if you are not going to use it for an extensive period of time.

10. Unplug the monitor if you need to clean it with a slightly damp cloth. The screen

may be wiped with a dry cloth when the power is off. However, never use organic

solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

11. To avoid the risk of shock or permanent damage to the set, do not expose the

monitor to dust, rain, water, or excessive moisture environment.

12. If your monitor gets wet, wipe it with dry cloth as soon as possible.

13. If foreign substance or water gets in your monitor, please turn the power off

immediately and disconnect the power cord. Then, remove the foreign substance

or water, and send it to the maintenance center.

14. Do not store or use the LCD monitor in locations exposed to heat, direct sunlight

or extreme cold.

15. In order to maintain the best performance of your monitor and use it for a longer

lifetime, please use the monitor in a location that falls within the following

temperature and humidity ranges. Temperature: 5-35°C 41-95°F

Product Installation

1. Switch off the power on both your monitor and your computer. The Power Switch

is located in the right of the monitor.

2. Connect the power cord to the AC outlet, and connect the power to the monitor

through the AC/DC adapter.

3. VGA Signal-Plug one end of the 15-pin signal cable to the video signal connector

at the rear of the PC system and the other end to the monitor. Secure the

connectors with the screws on the cable connector at both ends.

4. (Optional) DVI Signal-Plug one end of the DVI signal cable to the video signal

connector at the rear of the PC system and the other end to the monitor. Secure

the connectors with the screws on the cable connector at both ends.

5. (Optional) HDMI Signal-Plug one end of the HDMI signal cable to the video

signal connector at the rear of the PC system and the other end to the monitor.

Secure the connectors with the screws on the cable connector at both ends.

6. (Optional) RS232 Connection- Plug one end of RS232 cable to com-port

connector on your PC system and the other end to the monitor. Secure the

connectors with the screws on the cable connector at both ends.

Panel Specification

2. General Description

EMCM1900HB-V2 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCDpanel, a driver circuit,

and a backlight system. The screen format is intended to support the SXGA (1280(H) x 1024(V)) screen and

16.7M colors (RGB 6-bits + HiFRC data). All input signals are 2-channel LVDS interface compatible.

Inverter card of backlight is not included. M190EG02 V9 is designed for a display unit of personal

computer.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25 condition:

Items Unit Specifications

Screen Diagonal [mm] 482.6 (19.0" )

Active Area [mm] 376.32 (H) x 301.06 (V)

Pixels H x V 1280(x3) x 1024

Pixel Pitch [mm] 0.294 (per one triad) x 0.294

epirtSlacitreV.B.G.RtnemegnarrAlexiP

Display Mode Normally White

m/dc[ecnanimuLetihW 2] 250 (center, Typ) @60.0mA

Contrast Ratio 1000 : 1 (Typ)

)ffo/no,pyT(sm5]cesm[emiTesnopseRlacitpO

V0.5+]tloV[DDVegatloVtupnIlanimoN

]ttaW[noitpmusnoCrewoP 15.2 W (Typ)

(PDD= 4.6 W, PLED=10.6 W )

Weight [Grams] 1800 (Typ)

01x)V(423x)H(693]mm[)DxVxH(eziSlacisyhP .9(D) (Typ)

SDVLlennahclauDecafretnIlacirtcelE

taerteralG-noN,)H3(gnitaoc-draHtnemtaerTecafruS ment

Support Color 16.7M colors (RGB 6-bit + Hi_FRC)

Temperature Range

Operating

Storage (Non-Operating) [oC]

[oC]

0 to +50

-20 to +60

ecnailpmoCSHoRecnailpmoCSHoR

ecnailpmoC1.5OCTecnailpmoCOCT

Panel Specification

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25 (Room Temperature):

Item Unit Conditions Min. Typ. Max. Note

Horizontal (Right)

CR = 10 (Left) 75

75 85

85 -

Viewing Angle [degree] Vertical (Up)

CR = 10 (Down) 70

70 80

80 -

3-0001006noitceriDlamroNoitaRtsartnoC

Raising Time (TrR) - 3.6 5.7

Falling Time (TrF) - 1.4 2.3

Optical Response Time [msec]

Rising + Falling - 5 8

906.0xdeR

0.639 0.669

613.0ydeR

0.346 0.376

Green x 0.294

0.324 0.354

Green y 0.597

0.627 0.657

421.0xeulB

0.154 0.184

420.0yeulB

0.054 0.084

White x 0.283

0.313 0.343

Color / Chromaticity

Coordinates

(CIE)

White y 0.299

0.329 0.359

Central Luminance [cd/m2 6-052002]

7-0857stnioP9]%[ytimrofinUecnanimuL

85.1--]%[)zH06tA(klaTssorC

02---]Bd[rekcilF 9

Panel Specification

Note 1: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature

change during measuring (at surface 35 ). In order to stabilize the luminance, the measurement should be

executed after lighting Backlight for 30 minutes in a stable, windless and dark room.

Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)

Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and

180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows;

90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is

typically perpendicular to the display surface with the screen rotated about its center to developthe desired

measurement viewing angle.

Center of the screen

TFT

LCD

Measured distance

Photo detector

LCD Panel

Panel Specification

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A

The output signals of photo detector are measured when the input signals are changed from “Full

Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),

respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of

amplitudes.

TrR + TrF = 5 msec (typ.).

Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3

Note 6: Central luminance is measured by TOPCON SR-3

Note 7: Luminance uniformity of these 9 points is defined as below and measured by TOPCON SR-3

9)-(1Points9inLuminanceMaximum 9)-(1points9inLuminanceMinimum

Uniformity =

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

100

Optical

response

White

100

Optical

response

White

Black

1 Frame

Panel Specification

CT = | YB – YA | / YA 100 (%)

Where

YA = Luminance of measured location without gray level 0 pattern (cd/m2)

YB = Luminance of measured location with gray level 0 pattern (cd/m2)

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

Method: Record dBV & DC value with TRD-100

Level

Hz)30Level(atAC

log20(dB)Flicker =

Amplitude

Time

Gray Level = L127

Gray Level = L0

Panel Specification

3. Functional Block Diagram

The following diagram shows the functional block ofthe 19.0 inch Color TFT-LCD Module:

I/F PCB Interface:

187034-30091 / FI-XB30SSLA-HF15

Mating Type:

FI-X30HL (Locked Type)

FI-X30H (Unlocked Type)

TFT-LCD

1280*(3)*1024

Pixels

G1024

LED

Backlight

LED Driver on system

Gamma

Correction

LVD

+5V

Driver IC

D3840

Connector

LVDS

Receiver

Timing

Controller

ASIC

Mini-LVDS

Transmitter

DC/DC

Converter

Inhaltsverzeichnis

Andere I-Tech Monitor Handbücher

I-Tech

I-Tech ECHW2400HDWT2 Bedienungsanleitung

I-Tech

I-Tech UltraView HAP17 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1700 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1200 Bedienungsanleitung

I-Tech

I-Tech EMCMW21500HD-PCT-H Bedienungsanleitung

I-Tech

I-Tech FCOP0430 Bedienungsanleitung

I-Tech

I-Tech UltraView iDP600AV Bedienungsanleitung

I-Tech

I-Tech UltraView iDP-1000AV Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1000AV Bedienungsanleitung

I-Tech

I-Tech KKF1040V-TR Bedienungsanleitung

I-Tech

I-Tech UltraView iOP3200W Bedienungsanleitung

I-Tech

I-Tech iNAP-1000 Bedienungsanleitung

I-Tech

I-Tech iNAP-2700W Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1700W Bedienungsanleitung

I-Tech

I-Tech GCHW2700HB2 Bedienungsanleitung

I-Tech

I-Tech UltraView iOP40W Bedienungsanleitung

I-Tech

I-Tech NPW617X Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1900 Bedienungsanleitung

I-Tech

I-Tech UltraView iOP4000W Bedienungsanleitung

I-Tech

I-Tech NPW8215 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1900 Bedienungsanleitung

I-Tech

I-Tech HNPW719 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1700 Bedienungsanleitung

I-Tech

I-Tech HNP819 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung