IBASE Technology SI-96 Series Bedienungsanleitung

SI-96 Series

User Manual

2009 February V1.0

No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form or by any means, except documentation kept by the

purchaser for backup purposes, without the express written permission of IBASE

Technology INC. (“IBASE”).

Products and corporate names mentioned in this manual may or may not be

registered trademarks or copyrights of their respective companies, and are used for

identification purposes only. All trademarks are the property of their respective

owners.

Every effort has been made to ensure that the contents of this manual are correct and

up to date. However, the manufacturer makes no guarantee regarding the accuracy of

its contents, and reserves the right to make changes without prior notice.

Table of Contents

Acknowledgments................................................................................................. 6

Accessories ........................................................................................................... 7

Components.......................................................................................................... 8

I/O View ......................................................................................................................8

Specification ........................................................................................................10

Mounting SI-96 to the Wall ..................................................................................11

Wall mounting requirements ...................................................................................... 11

Selecting the location ................................................................................................. 12

Exploded view of the SI-96 assembly ....................................................................13

Parts description ........................................................................................................ 13

Installation ..........................................................................................................14

Installing the memory ................................................................................................ 14

Setting Jumper ........................................................................................................... 15

BIOS Setup ...........................................................................................................18

BIOS Introduction....................................................................................................... 18

BIOS Setup ................................................................................................................. 18

Driver Installation ................................................................................................37

Appendix .............................................................................................................46

I/O Port Address Map................................................................................................. 46

Interrupt Request Lines (IRQ)...................................................................................... 47

Watchdog Timer Configuration ................................................................................... 48

Safety Information

Your SI-96 is designed and tested to meet the latest standards of safety for

information technology equipment. However, to ensure your safety, it is important that

you read the following safety instructions.

Setting up your system

•Read and follow all instructions in the documentation before you operate your

system.

•Do not use this product near water.

•Set up the system on a stable surface or secure on wall with the provided rail. Do

not secure the system on any unstable plane or without the rail.

•Do not place this product on an unstable cart, stand, or table. The product may

fall, causing serious damage to the product.

•Slots and openings on the chassis are for ventilation. Do not block or cover these

openings. Make sure you leave plenty of space around the system for ventilation.

Never insert objects of any kind into the ventilation openings.

•This system should be operated from the type of power indicated on the marking

label. If you are not sure of the type of power available, consult your dealer or

local power company.

•Use this product in environments with ambient temperatures between 0˚C and

45˚C.

•If you use an extension cord, make sure that the total ampere rating of the

devices plugged into the extension cord does not exceed its ampere rating.

Care during use

•Do not walk on the power cord or allow anything to rest on it.

•Do not spill water or any other liquids on your system.

•When the system is turned off, a small amount of electrical current still flows.

Always unplug all power, and network cables from the power outlets before

cleaning the system.

•If you encounter the following technical problems with the product, unplug the

power cord and contact a qualified service technician or your retailer.

The power cord or plug is damaged.

Liquid has been spilled into the system.

The system does not function properly even if you follow the operating

instructions.

The system was dropped or the cabinet is damaged.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

NO DISASSEMBLY

The warranty does not apply to the products that have been disassembled by users

Acknowledgments

•Award is a registered trademark of Award Software International, Inc.

•PS/2 is a trademark of International Business Machines Corporation.

•Intel and Intel Core 2 Duo and Intel Celeron processors are registered

trademarks of Intel Corporation.

•Microsoft Windows is a registered trademark of Microsoft Corporation.

•Winbond is a registered trademark of Winbond Electronics Corporation.

•All other product names or trademarks are properties of their respective owners.

Accessories

a. Power Cord x 1 b. System Manual x 1

c. Driver CD x 1 d. Power Brick x 1

Components

I/O View

Refer to the diagram below to identify the components on this side of the system.

The power switch allows powering ON and OFF the system.

HDD

The hard disk LED blinks when data is being written into or read from the hard

disk drive.

PWR

The power LED illuminated when system been power on.

DVI-I

The Digital Visual Interface (DVI) port supports a high quality VGA-compatible

device such as a monitor or projector to allow viewing on a larger external display.

This connector supports digital and analog video signals. To use the standard

analog VGA output, you need to use the specific cable for this purpose.

DVI-D

The Digital Visual Interface (DVI) port supports a high quality VGA-compatible

device such as a monitor or projector to allow viewing on a larger external display.

This connector supports digital video signal only.

The stereo headphone jack (3.5mm) connects the audio signal to the system for

recording or bypasses it to storage or LINE OUT.

The stereo audio jack (3.5mm) is used to connect the system’s audio out signal to

amplified speakers or headphones.

LAN

The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a

local network.

USB

The USB (Universal Serial Bus) port is compatible with USB devices such as

keyboards, mouse devices, cameras, and hard disk drives. USB allows many

devices to run simultaneously on a single computer, with some peripheral acting

as additional plug-in sites or hubs.

DC IN

The supplied power adapter convertsAC power to DC power for use with this

jack. Power supplied through this jack supplies power to the system. To prevent

damage to the system, always use the supplied power adapter.

Specification

System Mainboard IB-826

Construction Aluminum

Chassis Color Black

Storage 2.5” 80GB SATA HDD x 1

Mounting Desktop or wall mount

Dimensions 270(W) x 37(H) x 182(D)mm

(10.63” x 1.45” x 7.16”)

Power Supply 80W DC adapter

Operating

Temperature 0°C ~ 45°C (32°F ~ 113°F)

Storage

Temperature -20°C ~ 80°C

Relative Humidity 5~95% @45°C (non-condensing)

Vibration HDD: 0.25grms/5~500Hz random operation

Shock HDD: 15grms peak acceleration (11 msec duration)

RoHS Available

‧This specification is subject to change without prior notice.

Inhaltsverzeichnis

Andere IBASE Technology Digitale Beschilderung Handbücher

IBASE Technology

IBASE Technology SI-606-M Bedienungsanleitung

IBASE Technology

IBASE Technology SI-613 Bedienungsanleitung

IBASE Technology

IBASE Technology SI-313-N Bedienungsanleitung

IBASE Technology

IBASE Technology SI-22 Series Bedienungsanleitung

IBASE Technology

IBASE Technology ARD-042-N Bedienungsanleitung

IBASE Technology

IBASE Technology SI-60E Bedienungsanleitung

IBASE Technology

IBASE Technology SI-606 Bedienungsanleitung

IBASE Technology

IBASE Technology SI-06 Series Bedienungsanleitung

IBASE Technology

IBASE Technology SI-613-M Bedienungsanleitung

IBASE Technology

IBASE Technology SI-313-DC Bedienungsanleitung

IBASE Technology

IBASE Technology SI-32-N Series Bedienungsanleitung

IBASE Technology

IBASE Technology ARD-028-N Bedienungsanleitung

IBASE Technology

IBASE Technology SA-112-N Bedienungsanleitung

IBASE Technology

IBASE Technology SI-623-N Bedienungsanleitung

IBASE Technology

IBASE Technology ARD-037-N Bedienungsanleitung

IBASE Technology

IBASE Technology SI-60E-M Bedienungsanleitung

IBASE Technology

IBASE Technology SI-122-N Bedienungsanleitung

Beliebte Digitale Beschilderung Handbücher anderer Marken

LG 72WS70MS-B Bedienungsanleitung

LG 65SM5D Bedienungsanleitung

LG 55EW5TK-A.AUS Bedienungsanleitung

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

LG 47VL10 Bedienungsanleitung

LG WP400 Kurzanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

LG 22XE1J Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

LG 55EJ5D Kurzanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

LG 75XS4G Bedienungsanleitung

LG 49UH7J Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch