IBASE Technology FWA-7108 Bedienungsanleitung

FWA-7108

User Manual

2009 May V1.0

No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form or by any means, except documentation kept by the

purchaser for backup purposes, without the express written permission of IBASE

Technology INC. (“IBASE”).

Products and corporate names mentioned in this manual may or may not be

registered trademarks or copyrights of their respective companies, and are used for

identification purposes only. All trademarks are the property of their respective

owners.

Every effort has been made to ensure that the contents of this manual are correct and

up to date. However, the manufacturer makes no guarantee regarding the accuracy of

its contents, and reserves the right to make changes without prior notice.

Table of Contents

Accessories ........................................................................................................... 6

Components.......................................................................................................... 7

Front View ................................................................................................................... 7

Specification ......................................................................................................... 9

Exploded view of the FWA-7108 assembly ............................................................10

Parts description ........................................................................................................ 11

Driver Installation ................................................................................................12

BIOS Setup ...........................................................................................................12

Safety Information

Your FWA-7108 is designed and tested to meet the latest standards of safety for

information technology equipment. However, to ensure your safety, it is important that

you read the following safety instructions.

Setting up your system

•Read and follow all instructions in the documentation before you operate your

system.

•Do not use this product near water.

•Set up the system on a stable surface or secure on wall with the provided rail. Do

not secure the system on any unstable plane or without the rail.

•Do not place this product on an unstable cart, stand, or table. The product may

fall, causing serious damage to the product.

•Slots and openings on the chassis are for ventilation. Do not block or cover these

openings. Make sure you leave plenty of space around the system for ventilation.

Never insert objects of any kind into the ventilation openings.

•This system should be operated from the type of power indicated on the marking

label. If you are not sure of the type of power available, consult your dealer or

local power company.

•Use this product in environments with ambient temperatures between 0˚C and

45˚C.

•If you use an extension cord, make sure that the total ampere rating of the

devices plugged into the extension cord does not exceed its ampere rating.

Care during use

•Do not walk on the power cord or allow anything to rest on it.

•Do not spill water or any other liquids on your system.

•When the system is turned off, a small amount of electrical current still flows.

Always unplug all power, and network cables from the power outlets before

cleaning the system.

•If you encounter the following technical problems with the product, unplug the

power cord and contact a qualified service technician or your retailer.

The power cord or plug is damaged.

Liquid has been spilled into the system.

The system does not function properly even if you follow the operating

instructions.

The system was dropped or the cabinet is damaged.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

NO DISASSEMBLY

The warranty does not apply to the products that have been disassembled by users

Accessories

a. Power Cord x 1 b. M/B Manual x 1

c. Driver CD x 1 d. Rack Mount Bracket x 1

e. Rack Mount Screw x 6 f. Rubber Foot x 5

Components

Front View

Refer to the diagram below to identify the components on this side of the system.

RST

The reset switch allows reset the system.

PWR

The power LED illuminated when system been power on.

HDD

The hard disk LED blinks when data is being written into or read from the hard

disk drive.

NBP

Bypass feature indicator. Bright for bypass.

ID1 ~ ID5

There are user programmable indicators. Each indicator can be program to

specify status indicator. The detail programming method please refer M/B user

manual.

SWD

Reserved.

USB

The USB (Universal Serial Bus) port is compatible with USB devices such as

keyboards, mouse devices, cameras, and hard disk drives. USB allows many

devices to run simultaneously on a single computer, with some peripheral acting

as additional plug-in sites or hubs.

Console

There is standard RS232 serial port present by RJ45 connector format. The detail

usage please refers to M/B user manual.

Eth0 ~ Eth7 (GbE)

The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection

to a local network up to Giga-bit transfer rate.

Bypass

The bypass function is used to link/short two independent Ethernet ports which

indicated with “Bypass” text when user’s application software halt or when power

is off.

Specification

System Mainboard MB835

Construction Steel

Chassis Color Black

Storage 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2(Optional)

Mounting Rack mount

Dimensions 429.4(W) x 44(H) x 376(D)mm / (16.9” x 1.7” x 14.8”)

Power Supply 180W Flex-ATX power supply

Operating Temperature 0°C ~ 45°C (32°F ~ 113°F) chamber air

Storage Temperature -20°C ~ 80°C

Relative Humidity 10~95% @45°C (non-condensing)

Vibration HDD: 0.25g/5~500Hz random operation

Shock HDD: 15g peak acceleration (11 msec duration)

RoHS Available

‧This specification is subject to change without prior notice.

Exploded view of the FWA-7108 assembly

Inhaltsverzeichnis

Andere IBASE Technology Firewall Handbücher

IBASE Technology

IBASE Technology FWA8208 Series Bedienungsanleitung

IBASE Technology

IBASE Technology FWA6504 Bedienungsanleitung

IBASE Technology

IBASE Technology FWA6304-D25 Bedienungsanleitung

IBASE Technology

IBASE Technology FWA8800-SHD Bedienungsanleitung

IBASE Technology

IBASE Technology FWA5104 series Bedienungsanleitung

IBASE Technology

IBASE Technology FWA6604 series Bedienungsanleitung

IBASE Technology

IBASE Technology MBN802 Bedienungsanleitung

IBASE Technology

IBASE Technology FWA8600 Bedienungsanleitung

IBASE Technology

IBASE Technology FWA8506 Bedienungsanleitung

IBASE Technology

IBASE Technology FWA8708-C Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung