IBASE Technology IB822 Series Bedienungsanleitung

IB822 Series

Intel®Pentium®Silver /

Celeron®SoC

3.5”Disk-Size SBC

User’s Manual

Version 1.0

(Dec. 2018)

IB822 Series User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval

system, translated into any language or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the

prior written consent of IBASE Technology, Inc. (hereinafter referred to as

“IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the

products described in this document without prior notice. Every effort has

been made to ensure the information in the document is correct; however,

IBASE does not guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising

from misapplication or inability to use the product or the information

contained herein, nor for any infringements of rights of third parties, which

may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

IB822 Series User’s Manual

iii

Compliance

This product has passed CE tests for environmental specifications and

limits. This product is in accordance with the directives of the European

Union (EU). In a domestic environment, this product may cause radio

interference in which case users may be required to take adequate

measures.

This product has been tested and found to comply with the limits for a Class

B device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications.

WEEE

This product must not be disposed of as normal

household waste, in accordance with the EU directive of

for waste electrical and electronic equipment (WEEE -

2012/19/EU). Instead, it should be disposed of by

returning it to a municipal recycling collection point. Check

local regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits use of the following substances

in concentrations exceeding 0.1% by weight (1000 ppm)

except for cadmium, limited to 0.01% by weight (100

ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

IB822 Series User’s Manual

Important Safety Information

Carefully read the precautions before using the board.

Environmental conditions:

•Use this product in environments with ambient temperatures between

0˚C and 60˚C.

•Do not leave this product in an environment where the storage

temperature may be below -20°C or above 80°C. To prevent from

damages, the product must be used in a controlled environment.

Care for your IBASE products:

•Before cleaning the PCB, unplug all cables and remove the battery.

•Clean the PCB with a circuit board cleaner or degreaser, or use cotton

swabs and alcohol.

•Vacuum the dust with a computer vacuum cleaner to prevent the fan

from being clogged.

WARNING

Attention during use:

•Do not use this product near water.

•Do not spill water or any other liquids on this product.

•Do not place heavy objects on the top of this product.

Anti-static precautions

•Wear an anti-static wrist strap to avoid electrostatic discharge.

•Place the PCB on an anti-static kit or mat.

•Hold the edges of PCB when handling.

•Touch the edges of non-metallic components of the product instead of

the surface of the PCB.

•Ground yourself by touching a grounded conductor or a grounded bit

of metal frequently to discharge any static.

CAUTION

Danger of explosion if the internal lithium-ion battery is replaced by an

incorrect type. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries according to

the manufacturer’s instructions or recycle them at a local recycling facility or

battery collection point.

IB822 Series User’s Manual

Warranty Policy

•IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of

shipment cannot be ascertained, the product serial numbers can be

used to determine the approximate shipping date.

•3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that

are not manufactured by IBASE, such as CPU, CPU cooler, memory,

storage devices, power adapter, panel and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL

BE TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL

BE BILLED FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest

information about the product.

2. If you need any further assistance from your distributor or sales

representative, prepare the following information of your product and

elaborate upon the problem.

•Product model name

•Product serial number

•Detailed description of the problem

•The error messages in text or in screenshots if there is any

•The arrangement of the peripherals

•Software in use (such as OS and application software, including

the version numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the

form and contact your distributor or sales representative.

IB822 Series User’s Manual

Table of Contents

Compliance.....................................................................................iii

Important Safety Information........................................................iv

Warranty Policy...............................................................................v

Technical Support & Services .......................................................v

Chapter 1 General Information..............................................1

1.1 Introduction .........................................................................................2

1.2 Features..............................................................................................2

1.3 Packing List.........................................................................................3

1.4 Optional Accessories...........................................................................3

1.5 Specifications......................................................................................4

1.6 Block Diagram.....................................................................................6

1.7 Overview.............................................................................................7

1.8 Dimensions .........................................................................................8

Chapter 2 HardwareConfiguration...........................................9

2.1 Installation.........................................................................................10

2.2 Setting the Jumpers...........................................................................11

2.2.1 How to Set Jumpers.............................................................11

2.3 Jumper & Connector Locations..........................................................12

2.4 Jumpers Quick Reference.................................................................13

2.4.1 LVDS Panel Brightness Selection (JP1)..............................13

2.4.2 LVDS Panel Power Selection (JP2).....................................14

2.4.3 eDP Panel Power Selection (JP3).......................................14

2.4.4 eDP / LVDS Panel Selection (JP4)......................................15

2.4.5 Clearing CMOS Data (JP5) .................................................15

2.4.6 Clearing ME Register (JP6).................................................16

2.4.7 ATX / AT Power Selection (JP8)..........................................16

2.5 Connectors Quick Reference.............................................................17

2.5.1 eDP Connector (CN1) .........................................................18

2.5.2 Console COM1 RS-232/422/485 Port (CN7) .......................19

2.5.3 LCD Backlight Connector (J2).............................................20

2.5.4 LVDS Connector (J1, J3).....................................................20

2.5.5 Audio Connector (J4) ..........................................................21

IB822 Series User’s Manual

vii

2.5.6 USB 2.0 Connector (J8).......................................................21

2.5.7 Amplifier Connector (J6)......................................................22

2.5.8 SATA HDD Power Connector (J11) .....................................22

2.5.9 Front Panel Connector (J13)................................................23

2.5.10 COM2 / COM3 / COM4 RS-232 Port (J18, J17, J14) ...........24

2.5.11 Digital I/O Connector (J19)...................................................24

2.5.12 DC Power Input Connector (J20).........................................25

2.5.13 Battery Connector (BAT1)....................................................25

Chapter 3 Drivers Installation..............................................27

3.1 Introduction........................................................................................28

3.2 Intel®Chipset Software Installation Utility...........................................28

3.3 Graphics Driver Installation................................................................30

3.4 HD Audio Driver Installation...............................................................31

3.5 Intel®Trusted Execution Engine Drivers.............................................32

3.6 Intel®Serial IO Drivers.......................................................................34

3.7 LAN Driver Installation .......................................................................35

Chapter 4 BIOS Setup...........................................................37

4.1 Introduction........................................................................................38

4.2 BIOS Setup........................................................................................38

4.3 Main Settings.....................................................................................39

4.4 Advanced Settings.............................................................................40

4.4.1 ACPI Computing...................................................................40

4.4.2 LVDS (eDP/DP) Configuration..............................................41

4.4.3 iSmart Controller...................................................................42

4.4.4 Fintek Super IO Configuration...............................................43

4.4.5 Fintek Super IO Hardware Monitor........................................48

4.4.6 M.2 Setup.............................................................................49

4.4.7 CPU Configuration................................................................50

4.4.8 AMI Graphic Output Protocol Policy......................................52

4.4.9 Network Stack Configuration.................................................53

4.4.10 CSM Configuration ...............................................................54

4.4.11 USB Configuration................................................................55

4.5 Chipset Settings.................................................................................56

4.5.1 South Cluster Configuration..................................................56

4.6 Security Settings................................................................................60

4.6.1 Secure Boot..........................................................................61

4.7 Boot Settings .....................................................................................63

viii

IB822 Series User’s Manual

4.8 Save & Exit Settings..........................................................................64

Appendix........................................................................................65

A. I/O Port Address Map........................................................................66

B. Interrupt Request Lines (IRQ)............................................................68

C. Watchdog Timer Configuration..........................................................69

D. Onboard Connector Reference Types ...............................................73

Chapter 1

General Information

The information provided in this chapter includes:

•Features

•Packing List

•Block Diagram

•Specifications

•Board Overview

•Board Dimensions

IB822 Series User’s Manual

1.1 Introduction

IB822 is a 3.5” disk-size single board computer based on the platform of

Intel®Pentium®Silver / Celeron®SoC. It features both DisplayPort and

HDMI, and onboard headers for eDP or 18/ 24-bit dual channel LVDS

interfaces for video display.

Photo of IB822

1.2 Features

•3.5” disk-size SBC with an onboard Intel®Pentium®Silver / Celeron®

SoC

•2 x DDR4-2400 SO-DIMM sockets, expandable up to 8 GB

•1 x HDMI, 1 x DisplayPort, and eDP / 18/24-bit dual-channel LVDS

•2 x Intel®211AT PCI-E Gigabit LAN

•M.2 B2242 & E2230 slots

•Configurable watchdog timer and digital I/O

Inhaltsverzeichnis

Andere IBASE Technology Hauptplatine Handbücher

IBASE Technology

IBASE Technology MI945AF Bedienungsanleitung

IBASE Technology

IBASE Technology IB100 Bedienungsanleitung

IBASE Technology

IBASE Technology IB811 Bedienungsanleitung

IBASE Technology

IBASE Technology RM-F6 Series Bedienungsanleitung

IBASE Technology

IBASE Technology MI930 Bedienungsanleitung

IBASE Technology

IBASE Technology IB530F Series Bedienungsanleitung

IBASE Technology

IBASE Technology MB930-R Bedienungsanleitung

IBASE Technology

IBASE Technology MI900 Bedienungsanleitung

IBASE Technology

IBASE Technology IB704 Bedienungsanleitung

IBASE Technology

IBASE Technology MB945 Bedienungsanleitung

IBASE Technology

IBASE Technology MI957 Bedienungsanleitung

IBASE Technology

IBASE Technology IB827 Bedienungsanleitung

IBASE Technology

IBASE Technology MI981 Bedienungsanleitung

IBASE Technology

IBASE Technology IB895 Bedienungsanleitung

IBASE Technology

IBASE Technology MB892 Bedienungsanleitung

IBASE Technology

IBASE Technology MBB-1000AF Series Bedienungsanleitung

IBASE Technology

IBASE Technology MI945P Bedienungsanleitung

IBASE Technology

IBASE Technology MI910 Bedienungsanleitung

IBASE Technology

IBASE Technology MI808 Bedienungsanleitung

IBASE Technology

IBASE Technology MB950 Bedienungsanleitung

IBASE Technology

IBASE Technology LV-67H Bedienungsanleitung

IBASE Technology

IBASE Technology IB113 Bedienungsanleitung

IBASE Technology

IBASE Technology IB905 Bedienungsanleitung

IBASE Technology

IBASE Technology IB940 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung