IBASE Technology IB945 Bedienungsanleitung

IB945

LGA775 Core2 Duo

Intel®Q45 Chipset

Full Size CPU Card

USER’S MANUAL

Version 1.0B

IB945 User’s Manual

Acknowledgments

Award is a registered trademark of Award Software International,

Inc.

PS/2 is a trademark of International Business Machines

Corporation.

Intel and Core 2 Duo are registered trademarks of Intel

Corporation.

Microsoft Windows is a registered trademark of Microsoft

Corporation.

Winbond is a registered trademark of Winbond Electronics

Corporation.

All other product names or trademarks are properties of their

respective owners.

IB945 User’s Manual iii

Table of Contents

Introduction.......................................................1

Installations.......................................................3

BIOS Setup.......................................................21

Drivers Installation......................................43

Intel Chipset Software Installation Utility.........................44

Intel Graphics Driver Installation......................................46

Realtek HD Code Audio Driver Installation.....................48

LAN Drivers Installation...................................................49

Appendix...........................................................51

A. I/O Port Address Map...................................................51

B. Interrupt Request Lines (IRQ)......................................52

C. Watchdog Timer Configuration....................................53

D. Digital I/O Sample Code..............................................57

IB945 User’s Manual

ATTENTION:

It is strongly recommended that only heatsink that have corresponding

(metal) backplate be used on the CPU card. This is to avoid the CPU

card being bent/distorted, causing the CPU card to become damaged. A

reference picture of a backplate and heatsink that has backplate are

shown below.

INTRODUCTION

IB945 User’s Manual 1

Introduction

Specifications

Model Name IB945 (Full Size CPU Card)

CPU Type

Support Intel® Core™2 Extreme processor QX9000 series

Intel® Core™2 Quad processor Q9000 series,

Intel® Core™2 Duo processor E8000 and E7000 series

Intel® Pentium® Dual Core, Intel® Celeron® Dual Core

CPU Speed Up to 3.0 GHz

CPU FSB 800/1066/1333MHz FSB

Green /APM APM1.2

BIOS Award BIOS, support ACPI Function

CPU Socket LGA775

Chipset Intel Eaglelake:Q45 + ICH10DO Chipset

Q45 GMCH: AC82Q45, 34mm x 34mm, 1254-pin FC-BGA

ICH10DO: AF82801JDO, 31mm x 31mm, 676-pin mBGA

Memory DDRIII 800/1066MHz

DIMM x 4 (w/o ECC), Max. 8GB

VGA Intel Q45 GMCH integrated graphics device (GMA4500)

Supports Direct X10 (Vista) & OpenGL 2.1

DVI Chrontel CH7307C x1 for DVI

LVDS N/A

LAN 1. ICH10DO Gigabit MAC + Intel Gigabit PHY: Intel 82567 x1

2. Intel 82574L PCI-e Gigabit LAN controller x1

USB ICH10DO built-in USB 2.0 host controller, support 12 ports

Serial ATA Ports ICH10DO built-in SATA controller, supports 6 ports

Parallel IDE JMicron JM368 (PCI-e to PATA) x1 for 1 PATA channel

PCI-to-ISA bridge ITE IT8888G x1 for high drive ISA bus

Audio Intel ICH10DO built-in high definition audio w/ Realtek ALC888

Codec supports 5.1 CH audio (line-out, line-in & mic)

LPC I/O Winbond 83627DHG

COM1(RS232),COM2(RS232/422/485), IrDAx1, Parallel x 1,

Floppy x 1; Hardware monitor (3 thermal inputs, 4 voltage monitor

inputs, VID0-4 & 2 Fan Headers)

Digital IO 4 in & 4 out

Keyboard/Mouse Supports PS/2 Keyboard/Mouse Connector

Expansion Slots Mini PCI-express socket x1

Edge Connector PS/2 Connector x1 for keyboard/mouse

DB15 x1 for VGA, RJ45 x2 for LAN 1, 2

On Board

Header/Connector Standard SATA (7-pin shrouded vertical) connector x4

40-pin, 0.1” pitch, standard box-header x1 for IDE

DF13-20 header x2 for LVDS, DF11-20 header x1 for DVI

34-pin box-header x1 for FDD, DF11 box-header x1 for printer

DF11 10x2 box-header x2 for COM1-2

4-pin header x1 for CPU fan (PWM smart fan)

3-pin header x1 for system fan

4x2 header x3 for USB1-6, IrDA

SATA connector x 6 ports, RAID function (0,1,10,5)

Watchdog Timer Yes (256 segments, 0, 1, 2…255 sec/min)

System Voltage +5V, +3.3V, +12V, -12V & 5VSB

Board Size 338mm x 122mm

INTRODUCTION

IB945 User’s Manual

Checklist

Your IB945 Core 2 Duo CPU Card package should include the items

listed below:

The IB945 Card

This User’s manual

1 x IDE cable

1 x Floppy cable

1 x SATA cable

1 x TMDS cable

2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a

Mounting Bracket

1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse

Audio cable with bracket (Audio-18K)

USB cable with bracket (USB2K-4)

1 CD containing the following:

Chipset Drivers

Flash Memory Utility

Optional SATA Power Cord (PW34)

Board Dimensions

INSTALLATIONS

IB945 User’s Manual 3

Installations

This section provides information on how to use the jumpers and

connectors on the IB945 in order to set up a workable system. The topics

covered are:

Installing the CPU ................................................................................. 4

Installing the Memory ........................................................................... 5

Setting the Jumpers................................................................................ 6

Connectors on IB945........................................................................... 10

INSTALLATIONS

IB945 User’s Manual

Installing the CPU

The IB945 CPU Card supports an LGA 775 processor socket for Intel®

Core 2 Duo processors.

The LGA 775 processor socket comes with a lever to secure the

processor. Refer to the pictures below, from left to right, on how to place

the processor into the CPU socket. Please note that the cover of the

LGA775 socket must always be installed during transport to avoid

damage to the socket.

IMPORTANT: Ensure that the power supply is OFF during CPU and

memory module installation.

INSTALLATIONS

IB945 User’s Manual 5

Installing the Memory

The IB945 CPU Card supports four DDR3 memory sockets for a

maximum total memory of 8GB. It supports DDRIII 800/1066.

Installing and Removing Memory Modules

To install the DDR3 modules, locate the memory slot on the board and

perform the following steps:

1. Hold the DDR3 module so that the key of the DDR3 module align

with that on the memory slot.

2. Gently push the DDR3 module in an upright position until the clips of

the slot close to hold the DDR3 module in place when the DDR

module touches the bottom of the slot.

3. To remove the DDR3 module, press the clips with both hands.

DDR2 Module

Lock Lock

IMPORTANT: Ensure that the power supply is OFF during CPU and

memory module installation.

INSTALLATIONS

IB945 User’s Manual

Setting the Jumpers

Jumpers are used on IB945 to select various settings and features

according to your needs and applications. Contact your supplier if you

have doubts about the best configuration for your needs. The following

lists the connectors on IB945 and their respective functions.

Jumper Locations on IB945...................................................................7

JP1/JP2 COM2/COM1 RS232 +5V/+12V Power Setting.....................8

JP3: RS232/422/485 (COM2) Selection................................................8

J4: Power Supply Type Select...............................................................9

JP6: Clear CMOS Contents ...................................................................9

Inhaltsverzeichnis

Andere IBASE Technology Hauptplatine Handbücher

IBASE Technology

IBASE Technology IB818F Series Bedienungsanleitung

IBASE Technology

IBASE Technology MI980 Bedienungsanleitung

IBASE Technology

IBASE Technology MI935 Bedienungsanleitung

IBASE Technology

IBASE Technology MI988 Bedienungsanleitung

IBASE Technology

IBASE Technology MB894 Bedienungsanleitung

IBASE Technology

IBASE Technology MB990 Bedienungsanleitung

IBASE Technology

IBASE Technology MI945P Bedienungsanleitung

IBASE Technology

IBASE Technology MI991AF Bedienungsanleitung

IBASE Technology

IBASE Technology MB898 Bedienungsanleitung

IBASE Technology

IBASE Technology IB800 Bedienungsanleitung

IBASE Technology

IBASE Technology MI811F-420 Bedienungsanleitung

IBASE Technology

IBASE Technology MI941 Bedienungsanleitung

IBASE Technology

IBASE Technology MB900-R Bedienungsanleitung

IBASE Technology

IBASE Technology MB950 Bedienungsanleitung

IBASE Technology

IBASE Technology MB930-R Bedienungsanleitung

IBASE Technology

IBASE Technology MI997AF Bedienungsanleitung

IBASE Technology

IBASE Technology MI836F Bedienungsanleitung

IBASE Technology

IBASE Technology MB820 Bedienungsanleitung

IBASE Technology

IBASE Technology MI933 Bedienungsanleitung

IBASE Technology

IBASE Technology IB897 Bedienungsanleitung

IBASE Technology

IBASE Technology IB885 Bedienungsanleitung

IBASE Technology

IBASE Technology LV-67H Bedienungsanleitung

IBASE Technology

IBASE Technology ARRANDALE IB957 Bedienungsanleitung

IBASE Technology

IBASE Technology MI991 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung