IBASE Technology MBN500 Bedienungsanleitung

MBN500

4-port (AMD G-Series SoC)

USER’S MANUAL

Version: 1.1

MBN500 series User’s Manual

Acknowledgments

AMI is a registered trademark of American Megatrends, Inc.

PS/2 is a trademark of International Business Machines

Corporation.

AMD is a registered trademark of Advanced Micro Devices, Inc.

Microsoft Windows is a registered trademark of Microsoft

Corporation.

All other product names or trademarks are properties of their

respective owners.

MBN500 series User’s Manu iii

Table of Content

Introduction ..............................................................4

Checklist..............................................................................5

MBN500 Specifications......................................................6

Board Dimensions...............................................................7

Installations ..............................................................8

Installing the Memory.........................................................9

Setting the Jumpers and Connectors .................................10

Jumper & Connector Location on MBN500-4CG /

MBN500-4C......................................................................11

BIOS Setup .............................................................16

BIOS Introduction.............................................................17

BIOS Setup........................................................................17

Drivers Installation.................................................31

Chipset Software Installation Utility.................................32

LAN Drivers Installation...................................................37

Appendix.................................................................39

A. I/O Port Address Map...................................................39

B. Interrupt Request Lines (IRQ)......................................40

C. Watchdog Timer Configuration....................................41

Introduction

MBN500 Series User’s Manual

Introduction

Product Description

The MBN500 networking motherboard is based on the latest AMD G-

Series SoC. It is ideally suited for rugged and compact design as entry

level networking appliance.

The motherboard is configured with the AMD GX-412HC or GX-

412TC SoC. It supports one DDR3L SO-DIMM, tour GbE ports with

one bypass segment, one mini PCIe half-size socket, one Cfast socket,

one STAT 3.0 and two USB 3.0 connectors. Moreover, it has more

extensions I/O through pin-deader such as two USB 2.0 and COM2

(LCM).

MBN500-4CG Features

AMD GX-412HC Quad Care 1.2GHz SoC

Four Intel® i211-AT Gigabit LAN ports

One DDR3L SO-DIMM, up to 8GB

Mini Display Port

Mini PCI-E half size slot x1

Cfast socket

One Bypass Segment on Eth3/4 and configurable by BIOS

MBN500-4C Features

AMD GX-412TC Quad Care 1.0GHz SoC

Four Intel® i211-AT Gigabit LAN ports

One DDR3L SO-DIMM, up to 8GB

Mini PCI-E half size slot x1

Cfast socket

One Bypass Segment on Eth3/4 and configurable by BIOS

Introduction

MBN500 series User’s Manu 5

Checklist

Your MBN500 package should include the items listed below.

The MBN500-4CG or MBN500-4C embedded board

Windows Drivers are able to download from iBase, please

contact your sales representative.

Cables are optional.

Introduction

MBN500 Series User’s Manual

MBN500 Specifications

Product Name

MBN500-4CG or MBN500-4C

Form Factor

Proprietary Size

CPU Type

Operating Frequency

AMD G-Series Crowned Eagle SoC, 28nm process technology

MBN500-4CG: AMD GX-412HC Quad Core 1.2GHz [TPD = 7W]

MBN500-4C: AMD GX-412TC Quad Core 1.0GHz [TPD = 6W]

BIOS

AMI BIOS 64Mb

Memory

One DDR3L SO-DIMM socket, Non-ECC, unbuffered

Display

N/A

Ethernet controller

Intel I211-AT PCI Express Gigabit ethernet controller x4

LAN

Eth1, 2, 3 & 4: Intel I211-AT @ RJ45 with LED

Network Bypass

One Bypass segment (Eth3/4)

Control by GPIO / Watchdog

Front Edge

System LED: Power (Green) / Bypass (Green/Red) / Status

(Yellow/Red)

LAN LED: Link/Active (Green) x 4; LAN Speed (Yellow/Green) x

1 x Mini DP (MBN500-4CG only)

Factory Mode Restore Reset Switch (GPIO control)

1 x USB 2.0 receptacle

Rear Edge

1 x RJ45 Console

2 x USB 3.0 receptacle

RJ45 GbE port x 4 with status LED

1 x Power on/off switch

2 x USB 2.0

Cylindrical (Tip) Connector DC +12V inlet with screw lock

Internal I/O Headers

1 x DC Fan 3-pin Connector

1 x DC-in 2-pin header (12V)

2 USB 2.0 DF11 8-pin connector

1 x COM2 DF11 8-pin connector

1 x SATA 3.0 data 7-pin connector

1 x SATA power (5V) 4-pin JST connector

1 x Cfast socket

1 x Mini PCIe half-size socket

4 x GPIO header 6-pin pitch 2.0mm

LPC I/O

Nuvoton NCT5523D:

1 x RJ45 Console

1 x COM2 DF11 8-pin connector; RS232 4-pin

Watchdog Timer

Yes (256 segments, 0, 1, 2…255 sec/min)

Expansion Slot

Mini PCIe half-size socket x 1

Power Requirement

Full range 40W Adapter / 12V (Optional)

Minimum 12V @ 2A without Cfast & mini PCIe module

Dimensions

162 (W) x 110 (D) mm

Operation

Temperature

0 ~ 60 ˚C (32 ~ 140 ˚F)

Storage Temperature

-20 ~ 80 ˚C (-4 ~ 176 ˚F)

Introduction

MBN500 series User’s Manu 7

[

Board Dimensions

110

162 unit: mm

Installations

MBN500 Series User’s Manual

Installations

This section provides information on how to use the jumpers and

connectors on the MBN500 in order to set up a workable system. The

topics covered are:

Installing the Memory............................................................................6

Setting the Jumpers and Connectors......................................................7

Installations

MBN500 series User’s Manu 9

Installing the Memory

The MBN500 board supports one DDR3 memory socket that can support

up to 8GB memory, DDR3L (w/o ECC function).

Installing and Removing Memory Modules

To install the DDR3L module, locate the memory slot on the board and

perform the following steps:

1. Hold the DDR3L module so that the key of the DDR3L module

aligns with that on the memory slot. Insert the module into the socket

at a slight angle (approximately 30 degrees). Note that the socket and

module are both keyed, which means that the module can be installed

only in one direction.

2. To seat the memory module into the socket, apply firm and even

pressure to each end of the module until you feel it slip down into the

socket.

3. With the module properly seated in the socket, rotate the module

downward. Continue pressing downward until the clips at each end

lock into position.

4. To remove the DDR3L module, press the clips with both hands.

Installations

MBN500 Series User’s Manual

Setting the Jumpers and Connectors

Jumpers are used on MBN500 to select various settings and features

according to your needs and applications. Contact your supplier if you

have doubts about the best configuration for your needs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBASE Technology Hauptplatine Handbücher

IBASE Technology

IBASE Technology MB997 Bedienungsanleitung

IBASE Technology

IBASE Technology MI889 Bedienungsanleitung

IBASE Technology

IBASE Technology ARRANDALE IB957 Bedienungsanleitung

IBASE Technology

IBASE Technology MB820 Bedienungsanleitung

IBASE Technology

IBASE Technology AFW-3000 Bedienungsanleitung

IBASE Technology

IBASE Technology IB981AF-C226 Bedienungsanleitung

IBASE Technology

IBASE Technology MI945 Bedienungsanleitung

IBASE Technology

IBASE Technology IB940 Bedienungsanleitung

IBASE Technology

IBASE Technology MI991 Bedienungsanleitung

IBASE Technology

IBASE Technology IB818F Series Bedienungsanleitung

IBASE Technology

IBASE Technology IB811 Bedienungsanleitung

IBASE Technology

IBASE Technology MBN800-8L Bedienungsanleitung

IBASE Technology

IBASE Technology MB886 Bedienungsanleitung

IBASE Technology

IBASE Technology MI999 Bedienungsanleitung

IBASE Technology

IBASE Technology IB897 Bedienungsanleitung

IBASE Technology

IBASE Technology MI808 Bedienungsanleitung

IBASE Technology

IBASE Technology IB887 Bedienungsanleitung

IBASE Technology

IBASE Technology MB870 Bedienungsanleitung

IBASE Technology

IBASE Technology LV-67H Bedienungsanleitung

IBASE Technology

IBASE Technology MB930-R Bedienungsanleitung

IBASE Technology

IBASE Technology IB898 Bedienungsanleitung

IBASE Technology

IBASE Technology MBB-1000AF Series Bedienungsanleitung

IBASE Technology

IBASE Technology IBR115 Bedienungsanleitung

IBASE Technology

IBASE Technology MI959 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung