IBASE Technology FWA8408 Bedienungsanleitung

FWA8408

FWA8406

1U Rackmount

Network Appliance

User’s Manual

Version 1.0

(Aug. 2017)

FWA8408 & FWA8406 User Manual

No part of this publication may be reproduced, copied, stored in a retrieval system, translated

into any language or transmitted in any form or by any means, electronic, mechanical,

photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc.

(hereinafter referred to as “IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the products described in

this document without prior notice. Every effort has been made to ensure the information in

the document is correct; however, IBASE does not guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising from

misapplication or inability to use the product or the information contained herein, nor for any

infringements of rights of third parties, which may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

FWA8408 & FWA8406 User Manual

iii

Compliance

This product has passed CE tests for environmental specifications and limits. This

product is in accordance with the directives of the Union European (EU). If users

modify and/or install other devices in this equipment, the CE conformity declaration

may no longer apply.

This product has been tested and found to comply with the limits for a Class A

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with manufacturer’s instructions, may cause

harmful interference to radio communications.

WEEE

This product must not be disposed of as normal household waste, in

accordance with the EU directive of for waste electrical and electronic

equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by

returning it to a municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS restrictions and

prohibits use of the following substances in concentrations exceeding

0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by

weight (100 ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

FWA8408 & FWA8406 User Manual

Important Safety Information

Carefully read the precautions before using the device.

Environmental conditions:

•Lay the device horizontally on a stable and solid surface in case the device may

fall, causing serious damage.

•Slots and openings on the chassis are for ventilation. Do not block or cover these

openings. Make sure you leave plenty of space around the device for ventilation.

NEVER INSERT OBJECTS OF ANY KIND INTO THE VENTILATION

OPENINGS.

•Use this product in environments at ambient temperatures 0˚C ~ 40˚.

•DO NOT LEAVE THIS DEVICE IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20˚C OR ABOVE 70˚C. This

could damage the device. The device must be used in a controlled environment.

Care for your IBASE products:

•Before cleaning the device, turn it off and unplug all cables such as power in case

a small amount of electrical current may still flow.

•Use neutral cleaning agents or diluted alcohol to clean the device chassis with a

cloth. Then wipe the chassis with a dry cloth.

•Vacuum the dust with a computer vacuum cleaner to prevent the air vent or slots

from being clogged.

WARNING

Attention during use:

•Do not use this product near water.

•Do not spill water or any other liquids on your device.

•Do not place heavy objects on the top of the device.

•Operate this device from the type of power indicated on the marking label. If you

are not sure of the type of power available, consult your distributor or local

power company.

•Do not walk on the power cord or allow anything to rest on it.

•If you use an extension cord, make sure that the total ampere rating of the

product plugged into the extension cord does not exceed its limits.

•When handling processor chips or memory modules, avoid touching their pins or

gold fingers. Put modules or peripherals back into antistatic bags when they are

not in use or not installed in the chassis.

Avoid Disassembly

You are not suggested to disassemble, repair or make any modification to the device.

Disassembly, modification, or any attempt at repair could generate hazards and

cause damage to the device, even bodily injury or property damage, and will void any

warranty.

FWA8408 & FWA8406 User Manual

CAUTION

Danger of explosion if internal lithium-ion battery is replaced by an incorrect type.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions. Under no

circumstances should the Lithium battery cell be shorted; otherwise the battery cell

may heat up or cause potential burn hazards.

Warranty Policy

•IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of shipment

cannot be ascertained, the product serial numbers can be used to determine

the approximate shipping date.

•3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are not

manufactured by IBASE, such as CPU, memory, HDD, power adapter, panel

and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAILS DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE

TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE BILLED

FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest information about

the product.

2. If you need any further assistance from your distributor or sales representative,

prepare the following information of your product and elaborate upon the

problem.

•Product model name

•Product serial number

•Detailed description of the problem

•The error messages in text or in screenshots if there is any

•The arrangement of the peripherals

•Software in use (such as OS and application software, including the version

numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and

contact your distributor or sales representative.

 
 
 
 
vi 
FWA8408 & FWA8406 User Manual 
 
Table of Contents 
Compliance....................................................................................................iii 
Important Safety Information.......................................................................iv 
WARNING ......................................................................................................iv 
CAUTION ........................................................................................................v 
Warranty Policy..............................................................................................v 
Technical Support & Services ......................................................................v 
Chapter 1 General Information................................................................1 
1.1 Introduction.............................................................................................2 
1.2 Features..................................................................................................3 
1.3 Packing List ............................................................................................3 
1.4 Optional Accessories ..............................................................................3 
1.5 Specifications..........................................................................................4 
1.6 Overview.................................................................................................6 
1.7 Dimensions.............................................................................................8 
Chapter 2 Hardware Configuration.......................................................12 
2.1 Essential Installations Before You Begin...............................................13 
2.1.1 CPU Installation / Replacement..............................................14 
2.1.2 Memory Installation / Replacement.........................................15 
2.1.3 HDD Installation / Replacement..............................................16 
2.1.4 CF Card & IPMI Module Installation / Replacement................18 
2.1.5 Fan Module Installation / Replacement...................................19 
2.1.6 Redundant Power Supply Unit Installation / Replacement......19 
2.1.7 IBN Module Installation / Replacement...................................20 
2.2 Setting the Jumpers..............................................................................21 
2.2.1 How to Set Jumpers ...............................................................21 
2.3 Jumper & Connector Locations on Motherboard ...................................22 
2.4 Jumpers Quick Reference.....................................................................24 
2.4.1 ME Register Clearance (JBAT3)..........................................24 
2.4.2 CMOS Data Clearance (JBAT4)...........................................25 
2.5 Connectors Quick Reference................................................................26 
2.5.1 System Function Connector (JP3)........................................27 
2.5.2 Digital I/O Port (JP4)............................................................29 

FWA8408 & FWA8406 User Manual

vii

Chapter 3 BIOS Setup............................................................................30

3.1 Introduction...........................................................................................31

3.2 BIOS Setup...........................................................................................31

3.3 Main Settings........................................................................................32

3.4 Advanced Settings................................................................................33

3.4.1 CPU Configuration..................................................................33

3.4.2 Trusted Computing.................................................................34

3.4.3 SATA Configuration................................................................35

3.4.4 SMART Setting.......................................................................35

3.4.5 NCT5523D Super IO Configuration ........................................36

3.4.6 Hardware Monitor...................................................................39

3.4.7 LAN Bypass Configuration......................................................40

3.4.8 Console Port Configuration.....................................................40

3.4.9 USB Configuration..................................................................42

3.5 Security Settings...................................................................................43

3.6 Boot Settings.........................................................................................44

3.7 Save & Exit Settings..............................................................................45

3.8 Server Management..............................................................................46

3.8.1 BMC SOL Function.................................................................47

3.8.2 BMC Network Configuration ...................................................48

Appendix ......................................................................................................49

A. I/O Port Address Map............................................................................50

B. Interrupt Request Lines (IRQ)...............................................................55

C. Digital I/O Sample Code........................................................................59

D. Watchdog Timer Configuration..............................................................64

Chapter 1

General Information

The information provided in this chapter includes:

•Features

•Packing List

•Optional Accessories

•Specifications

•Overview

•Dimensions

FWA8408 & FWA8406 User Manual

1.1 Introduction

FWA8408 & FWA8406 series are specifically designed for the network

security and management market. There are plenty of applications adopting

network security or network management as listed below.

FWA8408 & FWA8406 include the following models:

•FWA8408 (with a single PSU)

•FWA8408-RPSU (with 1+1 redundant PSU)

•FWA8406 (with a single PSU)

•FWA8406-RPSU (with 1+1 redundant PSU)

Photo of FWA8408

Photo of FWA8406

Network Security Applications:

•Firewall

•Unified Threat Management (UTM)

•Virtual Private Network (VPN)

•Proxy Server

•Caching Server

Network Management Applications:

•Load balancing

•Quality of Service

•Remote Access Service

The FWA networking appliance product line covers the spectrum from offering

platforms designed for:

•SOHO

•SMB

•Enterprise

Each product is designed to address the distinctive requirements of its

respective market segment from cost effective entry-level solutions to high

throughput and performance-bound systems for the enterprise level.

General Information

FWA8408 & FWA8406 User Manual

1.2 Features

•1U rackmount platform designed with Intel®Xeon®6th Gen. Core™

i7/i5/i3 processor

•DDR4 DIMM 2133 MHz (ECC supported per CPU SKUs)

•GbE LAN ports with 2 advanced LAN Bypass pairs

•Optional IPMI 2.0 module to output through VGA port for FWA8408

•CF slot and PCIe (x8) expansion slot(s)

•250W single power supply or 300W 1+1 redundant power supply

1.3 Packing List

Your product package should include the items listed below. If any of the

items below is missing, contact the distributor or the dealer from whom you

purchased the product.

Models with a single PSU:

•FWA8408 / FWA8406 x 1

•Power Cord x 1

•CPU Heatsink x 1

•Rack Mount Bracket x 2

Models with 1+1 redundant PSU:

•FWA8408-RPSU / FWA8406-RPSU x 1

•Power Cord x 2

•CPU Heatsink x 1

•Rack Mount Bracket x 2

1.4 Optional Accessories

IBASE provide optional accessories as follows. Please contact us or your

dealer if you need any.

•Console Cable (160 cm, PK1-51)

•VGA Cable (40 cm, VGA21A)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBASE Technology Server Handbücher

IBASE Technology

IBASE Technology FWA9400 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung