IBASE Technology IB919 Series Bedienungsanleitung

IB919 Series

Intel

Gen. Core™

U-series / Celeron

SoC

3.5” Disk-Size SBC

User’s Manual

Version 1.0A

(March 2020)

ii IB919 Series User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval

system, translated into any language or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior

written consent of IBASE Technology, Inc. (hereinafter referred to as

“IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the

products described in this document without prior notice. Every effort has

been made to ensure the information in the document is correct; however,

IBASE does not guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising

from misapplication or inability to use the product or the information

contained herein, nor for any infringements of rights of third parties, which

may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

IB919 Series User’s Manual

iii

Compliance

This product has passed CE Class B tests for environmental specifications

and limits. This product is in accordance with the directives of the European

Union (EU). In a domestic environment, this product may cause radio

interference in which case users may be required to take adequate

measures.

This product has been tested and found to comply with the limits for a Class

B device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications.

WEEE

This product must not be disposed of as normal household

waste, in accordance with the EU directive of for waste

electrical and electronic equipment (WEEE - 2012/19/EU).

Instead, it should be disposed of by returning it to a

municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits use of the following substances

in concentrations exceeding 0.1% by weight (1000 ppm)

except for cadmium, limited to 0.01% by weight (100 ppm).

• Lead (Pb)

• Mercury (Hg)

• Cadmium (Cd)

• Hexavalent chromium (Cr6+)

• Polybrominated biphenyls (PBB)

• Polybrominated diphenyl ether (PBDE)

iv IB919 Series User’s Manual

Important Safety Information

Carefully read the precautions before using the board.

Environmental conditions:

•Use this product in environments with ambient temperatures between

0˚C and 60˚C.

•Do not leave this product in an environment where the storage

temperature may be below -20° C or above 80° C. To prevent from

damages, the product must be used in a controlled environment.

Care for your IBASE products:

•Before cleaning the PCB, unplug all cables and remove the battery.

•Clean the PCB with a circuit board cleaner or degreaser, or use cotton

swabs and alcohol.

•Vacuum the dust with a computer vacuum cleaner to prevent the fan

from being clogged.

WARNING

Attention during use:

•Do not use this product near water.

•Do not spill water or any other liquids on this product.

•Do not place heavy objects on the top of this product.

Anti-static precautions

•Wear an anti-static wrist strap to avoid electrostatic discharge.

•Place the PCB on an anti-static kit or mat.

•Hold the edges of PCB when handling.

•Touch the edges of non-metallic components of the product instead of

the surface of the PCB.

•Ground yourself by touching a grounded conductor or a grounded bit of

metal frequently to discharge any static.

CAUTION

There is danger of explosion if the internal lithium-ion battery is replaced by

an incorrect type. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries according to

the manufacturer’s instructions or recycle them at a local recycling facility or

battery collection point.

IB919 Series User’s Manual

Warranty Policy

•IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of

shipment cannot be ascertained, the product serial numbers can be

used to determine the approximate shipping date.

•3

-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are

not manufactured by IBASE, such as CPU, CPU cooler, memory,

storage devices, power adapter, panel and touchscreen.

＊ PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE

TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE

BILLED FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest

information about the product.

2. If you need any further assistance from your distributor or sales

representative, prepare the following information of your product and

elaborate upon the problem.

•Product model name

•Product serial number

•Detailed description of the problem

•The error messages in text or in screenshots if there is any

•The arrangement of the peripherals

•Software in use (such as OS and application software, including the

version numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the

form and contact your distributor or sales representative.

vi IB919 Series User’s Manual

Table of Contents

Chapter 1

General Information ............................................. 1

1.1

Introduction .........................................................................................2

1.2

Features..............................................................................................2

1.3

Packing List......................................................................................... 3

1.4

Optional Accessories...........................................................................3

1.5

Specifications ...................................................................................... 4

1.6

Block Diagram..................................................................................... 6

1.7

Overview .............................................................................................7

1.8

Dimensions ......................................................................................... 9

Chapter 2

Hardware Configuration........................................ 11

2.1

Essential Installations Before You Begin ........................................... 12

2.1.1

Installing the Memory ........................................................... 12

2.2

Setting the Jumpers .......................................................................... 13

2.3

Jumper & Connector Locations ......................................................... 14

2.4

Jumpers Quick Reference ................................................................. 15

2.4.1

CMOS Data Clearance (JBAT1).......................................... 15

2.4.2

EDP Panel Power Selections (JP2)..................................... 16

2.4.3

LVDS Panel Power / Brightness Selections (JP3 / JP5) ...... 16

2.4.4

EDP / LVDS Selections (JP4) ............................................. 17

2.5

Connectors Quick Reference............................................................. 18

2.5.1

COM1 RS-232/422/485 Port (CN9) ..................................... 19

2.5.2

Amplify Connector (J1)........................................................ 20

2.5.3

Audio Connector (J3) .......................................................... 20

2.5.4

SATA HDD Power Connector (J5)....................................... 21

2.5.5

SMBUS Connector (J10) ..................................................... 21

2.5.6

Front Panel Connector (J9) ................................................. 22

2.5.7

USB 2.0 Connector (J6) ...................................................... 23

2.5.8

Battery Connector (J16) ...................................................... 23

2.5.9

COM2, COM3, COM4 RS-232 Ports (J20, J21, J22)........... 24

2.5.10

DC Power Input Connector (J18)......................................... 24

2.5.11

Digital I/O Connector (J17) .................................................. 25

2.5.12

LCD Backlight Connector (J15) ........................................... 25

2.5.13

LVDS Connector (J14, J13)................................................. 26

2.5.14

CPU Fan Connector (CPU_FAN1) ...................................... 26

IB919 Series User’s Manual

vii

Chapter 3

Drivers Installation ............................................. 27

3.1

Introduction........................................................................................28

3.2

Intel

Chipset Software Installation Utility ..........................................28

3.3

VGA Driver Installation.......................................................................30

3.4

HD Audio Driver Installation ...............................................................32

3.5

LAN Driver Installation .......................................................................34

3.6

Intel

Management Engine Drivers Installation ..................................36

3.7

Intel

Serial IO Drivers Installation .....................................................38

Chapter 4

BIOS Setup.......................................................... 41

4.1

Introduction........................................................................................42

4.2

BIOS Setup........................................................................................42

4.3

Main Settings.....................................................................................43

4.4

Advanced Settings.............................................................................44

4.4.1

Connectivity Configuration ....................................................45

4.4.2

CPU Configuration................................................................46

4.4.3

Power & Performance...........................................................47

4.4.4

PCH-FW Configuration.........................................................48

4.4.5

Trusted Computing ...............................................................49

4.4.6

ACPI Settings .......................................................................50

4.4.7

LVDS Configuration..............................................................51

4.4.8

F81964 Super IO Configuration ............................................52

4.4.9

F81964 Super IO Configuration for IB919EF ........................53

4.4.10

Hardware Monitor .................................................................54

4.4.11

AMI Graphic Output Protocol Policy......................................55

4.4.12

USB Configuration................................................................56

4.4.13

CSM Configuration ...............................................................57

4.4.14

NVMe Configuration .............................................................58

4.4.15

Network Stack Configuration ................................................59

4.5

Chipset Settings ................................................................................60

4.6

Security Settings................................................................................65

4.7

Boot Settings .....................................................................................66

4.8

Save & Exit Settings ..........................................................................67

viii IB919 Series User’s Manual

Appendix ........................................................................................ 68

I/O Port Address Map........................................................................ 69

Interrupt Request Lines (IRQ)............................................................ 72

Watchdog Timer Configuration.......................................................... 74

Onboard Connector Reference Types ............................................... 78

Chapter 1

General Information

The information provided in this chapter includes:

•Features

•Packing List

•Optional Accessories

•Specifications

•Block Diagram

•Board Overview

•Board Dimensions

2 IB919 Series

User’s Manual

1.1 Introduction

•IB919 series is a 3.5” disk-size single board computer based on the

platform of Intel®8th Gen. Core™U-series or Celeron®processor. It

features both HDMI and Display Port at I/O coastline, and onboard

headers for dual channel LVDS interface for video display. Advanced

features include four USB 3.0, two SATA III, configurable watchdog

timer, digital I/O, and TPM 2.0.

Photo of IB919

1.2 Features

•3.5” disk-size SBC with Intel®8th Gen. Core™ U-series or Celeron®

processor

•2 x DDR4-2400/2133 SO-DIMM slots, expandable up to 32 GB

•Video output through LVDS or EDP connector, Display Port, and USB

Type C

•2 x GbE LAN ports, 2 x USB 2.0, 4 x USB 3.0, 4 x COM, 2 x SATA III,

1 x M.2 (M-Key), 1 x M.2 (E-Key)

•Configurable watchdog timer, digital I/O, TPM 2.0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBASE Technology Einplatinencomputer Handbücher

IBASE Technology

IBASE Technology IB953 Series Bedienungsanleitung

IBASE Technology

IBASE Technology IB961 Bedienungsanleitung

IBASE Technology

IBASE Technology MB837-D25 Bedienungsanleitung

IBASE Technology

IBASE Technology IBR117 Bedienungsanleitung

IBASE Technology

IBASE Technology IB811F Series Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-915-i5M Bedienungsanleitung

IBASE Technology

IBASE Technology IB818F-I50 Bedienungsanleitung

IBASE Technology

IBASE Technology IBR210 Bedienungsanleitung

IBASE Technology

IBASE Technology IB909F Bedienungsanleitung

IBASE Technology

IBASE Technology IB918F Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung