IBLUON BT-HS02 Bedienungsanleitung

BLUETOOTH STEREO HEADSET

BT-HS02

USER GUIDE

TABLE OF CONTENTS

1. Introduction

2. Package Contents

3. Features

4. Charging

5. Pairing with Bluetooth Devices

6. Re-connecting with the paired device

7. Headset Controls

8. What the lights mean

9. Product Specification

10. Troubleshooting

11. Warning

12. Warranty

13. Need more help?

1. Introduction

Thank you for choosing the BT-HS02 Bluetooth Stereo Headset with Bluetooth

technology. BT-HS02 Bluetooth Stereo Headset makes connectivity invisible

and reliable, besides will provide you with wireless control over many of today’s

audio and mobile devices.

What is Bluetooth?

Bluetooth wireless technology is a short-range communications technology

intended to replace the cables connecting portable and/or fixed devices while

maintaining high levels of security. It is designed to communicate data/voice

within short-range distance of 10m to 100m. Bluetooth technology has achieved

global acceptance such that any Bluetooth enabled device, almost everywhere

in the world, can connect to other Bluetooth enabled devices in proximity.

A fundamental Bluetooth wireless technology strength is the ability to

simultaneously handle both data and voice transmissions. This enables users to

enjoy variety of innovative solutions such as a hands-free headset for voice

calls, printing and fax capabilities, and synchronizing PDA, laptop, and mobile

phone applications to name a few.

2. Package Contents

BT-HS02 Stereo Headset USB Charging cable User Manual

3. Feature

4. Charging

BT-HS02 Stereo Headset uses the rechargeable Lithium-Polymer battery.

Make sure your BT-HS02 is fully charged for two hours before you start using.

How to charge;

1) Plug the USB cable into the USB port on your computer.

2) The LED indicator is red when charging the headset.

3) The LED indicator turns blue when the battery is fully charged.

4) Remove the battery charger from the headset.

5. Paring with Bluetooth Devices

Before you can use your headset with a Bluetooth enabled product, you must

pair it with that product.

How to pair;

i214_□□□

6. Re-connecting with a paired device

Although you disconnect your headset from the paired device, you don’t need to

re-pair with the same device that was already paired before in order to

reconnect your headset to that device. You can only turn the power-switch on

and wait for a couple of seconds to reconnect your headset to that device.

7. Headset Control

Key Definition

Action Key Press Time

Sound

Effect

Power On Slide S/W On Don’t care Start-Up Sound

Pairing Mode - Enter Very Long Warning Sound

Pairing Mode - Exit

Short Tick Sound

Wake Up the Headset Long Tick Sound

Reconnect Short or Long Tick Sound

Battery Check +/- & << >> Pressed No Sound

Play/Pause Short No Sound

Play stop Long Tick Sound

Backward Search << Short Tick Sound

Forward Search >> Short Tick Sound

Volume Up Short

Volume-up (Repeat)

Continuous

Tick Sound on

Volume Limit

Volume-down Short

Volume-down (Repeat)

Continuous

Tick Sound on

Volume Limit

Accept Call Short Tick Sound

Mic Mute On/Off << or >> Short Tick Sound

Voice Dial Short Tick Sound

Call Transfer Long Tick Sound

Reject Call Long Tick Sound

Hang Up Call Short Tick Sound

Last Call Long Tick Sound

Cancel Call Short Tick Sound

* Short key : 0.5~2 seconds, Long key : 2~5 seconds,

Very long key : Over 5 seconds

8. What the lights mean

LED-Blue LED-Red

Action

Status

Time

(sec)

OFF

Time

(sec)

Status

Time

(sec)

OFF

Time

(sec)

Note

Pairing

Blink

Mode 1

0.2 0.2 Blink

Mode 1

0.2 0.2

A2DP

Streaming

Blink

Mode 1

0.05 2.0 Off

0.05Waiting

Connection

Blink

Mode 2

0.05

1.0

Off

0.05Ring

Blink

Mode 3

0.05

1.0

Off

Active Call

Blink

Mode 1

0.05 2.0 Off

Charging

Off On

Full charged

On Off

Very

Low

Off Blink

Mode 1

0.2 0.2

Low

Off On

Normal

On Off

Battery

Check

Mode

Full On Off

* Blink Mode 1 : On - Off - On - Off …

Blink Mode 2 : On1 - Off1 - On1 - Off2 …

Blink Mode 3 : On1 - Off1 - 20 times - Off2 - On1 …

9. Products Specification

Bluetooth Version Version 2.0, Class II

Bluetooth Support Profile A2DP, AVRCP, HSP, HFP

RF Frequency 2,4GHz / 79 Channel / AFH

Coverage Range* Bluetooth standard 33 feet (10 meters)

Music Playback Time* Up to 8 hours

(The maximum playback time depends on the usage

frequency and environmental factors. A long distance

wireless connection and high volume level will increase the

power consumption and may decrease the playback time.)

Talk Time* Up to 10 hours

Standby Time* Approximately 300 hours

Charging Time Approximately 2.5 hours

Charging Methods Mini USB cable, DC Adapter(5V, 300mA)

Battery 290mAh, Lithium-Poymer

Headset Speaker

Diameter: < 15mm

Frequency Response: 20Hz ~ 20KHz

SPL (Sound Pressure Level): 93dB @ 1KHz

Impedance: 16Ω@ 1V, 1KHz

Power Rating: 5mW (Maximum)

Mic. Typical : ECM unit (110dB)

S/N Ratio Up to 58dB

Size and Weight 45.5(W) x 23.5(L) x 11.8(H) , About 40g

Supports Bluetooth Hands-Free and Headset Profiles (HFP/HSP), Advanced

Audio Distribution Profile (A2DP), and Audio/Video Remote Control Profile

(AVRCP)

*Performance may vary by device.

10. Troubleshooting

1) If you hear crackling noises, - Bluetooth is a radio technology, which

means it is sensitive to objects between the headset and the connected

device. It is designed for the headset and the connected device to be used

within 100 meters (33 feet) of each other, with no major object in the way.

2) If you have no light on the indicator LED, - Please make sure if the headset

is switched on or you also check the battery if it is too low for power on.

3) If you have pairing problems, - You may have deleted the pairing

connection in you Bluetooth mobile phone, MP3, and other Audio devices.

Please follow the pairing instruction in section 5.

4) If you can not hear anything, - Please increase the volume in the headset,

and ensure that the headset is paired to a device that is playing.

5) If you are facing the other problems, - Please contact with the seller.

11. Warning

Use of a headset that covers both ears will impair your ability to hear other

sounds. Use of such a headset while operating a motor vehicle or riding a

bicycle may create a serious hazard to you and/or others, and is prohibited by

law in some regions.

12. Warranty

zThis warranty lasts for one year from the date of purchase of the

products.

zThis warranty extends to you only if you are the end users with the

original purchase receipt.

zWe will, at our option, repair or replace the products that do not conform

to the warranty.

zThe manufacturer or the seller shall not be liable for any incidental

consequence or damages by the end users.

zThis warranty gives you specific legal right. You may also have other

rights which vary from state to state.

13. Need more help?

Additional page

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: This device may not cause harmful interference, and

This device must accept any interference received, Including interference that

may cause undesired operation

Information to User

This equipment has been tested and found to comply with the limits for a Class

B digital device, Pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio Frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver- Connect the

equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Do not

Any changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void user’s authority to operate the

equipment.

Inhaltsverzeichnis

Andere iBLUON Headset Handbücher

iBLUON

iBLUON BT-HS02-HQ Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

iBLUON BT-HS02 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken