IBM System x Education M5000 Series Bedienungsanleitung

Thank you for purchasing the ServeRAID M5000 Series

Performance Accelerator Key for System x®. The

ServeRAID M5000 Series Performance Accelerator Key

enables support for the following features:

– RAID 6 configurations

– RAID 60 configurations

– CacheCade™

– FastPath™

– Recovery™

– SafeStore™ Encryption Services

on the following ServeRAID SAS/SATA controllers:

– ServeRAID M5014 SAS/SATA controller

– ServeRAID M5015 SAS/SATA controller

– ServeRAID M5025 SAS/SATA controller

Figure 1 shows the ServeRAID M5000 Series Performance

Accelerator Key. The ServeRAID M5000 Series

Performance Accelerator Key mounts directly to the

controller using the J1 2-pin connector.

Figure 1 ServeRAID M5000 Series Performance

Accelerator Key

Please take a few minutes to read this Quick Install Guide.

If you need more information about any topic covered in this

guide, refer to the documents on your ServeRAID M

Documentation CD.

INSTALLING THE SERVERAID M5000

SERIES PERFORMANCE ACCELERATOR

KEY ON THE SERVERAID M5014/M5015

SAS/SATA CONTROLLERS

Perform the following steps to install the ServeRAID M5000

Series Performance Accelerator Key directly to the

ServeRAID M5014/M5015 SAS/SATA controllers.

1. Turn off the computer and unplug the power cords from

the rear of the power supply.

2. Remove the cover from the computer according to the

instructions in the system user’s manual so you can

access the controller.

Note:When handling static sensitive devices, take

precautions to avoid damage from static

electricity.

3. Ground yourself before you touch the controller or the

key.

4. Remove the key from the package.

5. Hold the key so that the J1 connector is facing upward

and the connector lines up with the JT8 header on the

controller, as shown in Figure 2.

6. Insert the J1 connector into the JT8 header so that the

two connectors are firmly joined.

Figure 2 Installing the ServeRAID M5000 Series

Performance Accelerator Key on the

ServeRAID M5014/M5015 SAS/SATA

Controllers

7. Reinstall the computer cover and reconnect the power

cords.

Attention: It is important to back up any data before you

make a change in system configuration. Failure

to do this could result in data loss.

85060-00

ServeRAID M5000 Series

PerformanceAccelerator Key

for System x

Quick Install Guide

IBM P/N: 60Y0041

First Edition (October 2010)

US Government Users Restricted Rights – Use, duplication or disclosure restricted

by GSA ADP Schedule Contract with IBM Corp.

IBM, the IBM logo, and System x are trademarks or registered trademarks of

International Business Machines Corporation in the United States, other countries,

or both.

LSI and the LSI logo design are trademarks or registered trademarks of LSI

Corporation. All other brand and product names may be trademarks of their

respective companies.

8. Turn on the power to the computer, making sure that

the power is turned on to the SAS devices and the

SATA II devices before or at the same time as the host

computer. If the power is turned on to the computer

before it is turned on to the devices, the computer might

not recognize the devices.

INSTALLING THE SERVERAID M5000

SERIES PERFORMANCE ACCELERATOR

KEY ON THE SERVERAID M5025 SAS/

SATA CONTROLLER

Perform the following steps to install the ServeRAID M5000

Series Performance Accelerator Key directly to the

ServeRAID M5025 SAS/SATA controller.

Step 1 Turn off the computer and unplug the power

cords from the rear of the power supply.

Step 2 Remove the cover from the computer according

to the instructions in the system user’s manual so

you can access the controller.

Step 3 Ground yourself before you touch the controller

or the key.

Step 4 Remove the key from the package.

Step 5 Hold the key so that the J1 connector is up and

the connector lines up with the J1A2 shielded

header on the controller, as shown in Figure 3.

Step 6 Insert the J1 connector into the J1A2 header so

that the two connectors are firmly joined.

Figure 3 Installing the ServeRAID M5000 Series

Performance Accelerator Key on the

ServeRAID M5025 SAS/SATA Controller

Step 7 Reinstall the computer cover and reconnect the

power cords.

Step 8 Turn on the power to the computer, making sure

that the power is turned on to the SAS devices

and the SATA II devices before or at the same

time as the host computer. If the power is turned

on to the computer before it is turned on to the

devices, the computer might not recognize the

devices.

TECHNICAL SUPPORT

Refer to the Important Notices document for information

about the technical support available for this product.

Attention: When handling static sensitive devices, take

precautions to avoid damage from static

electricity.

85048-15

Andere Handbücher für System x Education M5000 Series

Andere IBM Computerhardware Handbücher

IBM

IBM ATA 133 Bedienungsanleitung

IBM

IBM M791 Series Bedienungsanleitung

IBM

IBM 7133 D40 Bedienungsanleitung

IBM

IBM BladeCenter S SAS RAID Controller Module Bedienungsanleitung

IBM

IBM 1 GB Microdrive Storage Card Bedienungsanleitung

IBM

IBM Power Systems 9223-22S Bedienungsanleitung

IBM

IBM PowerPC 750GX Bedienungsanleitung

IBM

IBM 9125-F2C Bedienungsanleitung

IBM

IBM eserver 7210 Handbuch

IBM

IBM 19K4543 Bedienungsanleitung

IBM

IBM WD1003-WA2 Bedienungsanleitung

IBM

IBM SAS Connectivity Cars Bedienungsanleitung

IBM

IBM QuickOn for Running Windows Bedienungsanleitung

IBM

IBM BladeCenter Management Module Bedienungsanleitung

IBM

IBM LS42 - BladeCenter - 7902 Bedienungsanleitung

IBM

IBM 09N4076 Bedienungsanleitung

IBM

IBM eserver Cluster 1350 Montage- und Wartungsanleitung

IBM

IBM Computer Gebrauchsanweisung

IBM

IBM 3745 Series Bedienungsanleitung

IBM

IBM Power 730 Express 8231-E2B Bedienungsanleitung

IBM

IBM p5 550 Installationsanleitung

IBM

IBM 25CPC710 Montage- und Bedienungsanleitung

IBM

IBM MPC603EC Bedienungsanleitung

IBM

IBM 55PUS8118 SCSI-2 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung