IBM L5X Bedienungsanleitung
IBMHalfHighLTOGen5SASTapeDrive
Installation and User's Guide
Machine Type 3628 Model L5X and N5X
Important:
Review the maintenance information in Chapter 3, "Operating the drive" and in the
Warranty information document that comes with the tape drive, because periodic
maintenance is not covered by the IBM warranty. Repairs or exchanges that result from
improper maintenance might result in billable service charges.
IBMHalfHighLTOGen5SASTapeDrive
Installation and User's Guide
Machine Type 3628 Model L5X and N5X
Note: Before using this information and the product it supports, read the general information in Appendix F, “Notices,” on page
77, the Safety Information and Environmental Notices and User Guide documents on the IBM Documentation CD, and the Warranty
information and Important notices documents that come with the product.
First Edition (May 2011)
© Copyright IBM Corporation 2011.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d'installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
© Copyright IBM Corp. 2011 iii
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto, lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
iv Half-High LTO Gen 5 SAS Tape Drive Installation and User's Guide
Statement 1
DANGER
Electrical current from power, telephone, and communication cables is
hazardous.
To avoid a shock hazard:
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.
vConnect all power cords to a properly wired and grounded electrical outlet.
vConnect to properly wired outlets any equipment that will be attached to
this product.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following table when
installing, moving, or opening covers on this product or attached devices.
To Connect: To Disconnect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Safety v
Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable parts
inside the device.
vUse of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Statement 5
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current from
the device, ensure that all power cords are disconnected from the power source.
1 2
vi Half-High LTO Gen 5 SAS Tape Drive Installation and User's Guide
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any component
that has this label attached. There are no serviceable parts inside these
components. If you suspect a problem with one of these parts, contact a service
technician.
Safety vii
viii Half-High LTO Gen 5 SAS Tape Drive Installation and User's Guide
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere IBM Gleichstromantrieb Handbücher
IBM
IBM ThinkPad 73P3297 Bedienungsanleitung
IBM
IBM 9040-MR9 Bedienungsanleitung
IBM
IBM ThinkPad 73P3315 Bedienungsanleitung
IBM
IBM ThinkPad 73P3279 Bedienungsanleitung
IBM
IBM OPTIONS Zip 100MB IDE Bedienungsanleitung
IBM
IBM TS2290 Bedienungsanleitung
IBM
IBM 9348 Bedienungs- und Montageanleitung
IBM
IBM ThinkPad 22P7028 Bedienungsanleitung
IBM
IBM TS22 Series Bedienungsanleitung
IBM
IBM Ultrium Internal Tape Drive T200 Bedienungsanleitung
Beliebte Gleichstromantrieb Handbücher anderer Marken
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Stücklistenhandbuch
Chamberlain Garog
Chamberlain Garog D Series Bedienungsanleitung
Parker
Parker PDS Series Bedienungsanleitung
Festo
Festo DGC G Series Einrichtungshandbuch
Binks
Binks QS-5012-1-CE Bedienungsanleitung
