IBM BladeCenter GPU Expansion Blade Bedienungsanleitung

BladeCenter GPU Expansion Blade

Installation Guide



BladeCenter GPU Expansion Blade

Installation Guide



Note

Before using this information and the product it supports, read the general information in

“Notices” on page 31, the Warranty Information document, and the IBM Safety Information and the

Environmental Notices and User Guide documents on the IBM Documentation CD.

The most recent version of this document is available at http://www.ibm.com/supportportal.

Fifth Edition (June 2012)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ...............v

Guidelines for trained service technicians ....vi

Inspecting for unsafe conditions ......vi

Guidelines for servicing electrical equipment . . vii

Safety statements ............viii

Chapter 1. Introduction ........1

Related documentation ...........2

The IBM Documentation CD .........2

Hardware and software requirements .....2

Using the Documentation Browser ......2

Notices and statements in this document .....3

Chapter 2. Expansion blade LEDs . . . 5

Chapter 3. Installing options ......7

Installation guidelines ...........7

System reliability guidelines ........7

Handling static-sensitive devices.......8

Installing a GPU Expansion Blade .......8

Removing a GPU Expansion Blade ......13

Removing the expansion blade cover ......14

Installing the expansion blade cover ......15

Installing a horizontal-compact-form-factor

expansion card .............16

Replacing a GPU adapter (trained service technician

only) ................17

Removing a GPU adapter ........17

Installing a GPU adapter .........19

Completing the installation .........21

Light path diagnostics ...........22

Chapter 4. Parts listing - BladeCenter

GPU expansion unit .........25

Appendix. Getting help and technical

assistance .............27

Before you call .............27

Using the documentation ..........28

Getting help and information from the World Wide

Web.................28

How to send DSA data to IBM ........28

Creating a personalized support web page ....28

Software service and support ........29

Hardware service and support ........29

IBM Taiwan product service .........29

Notices ..............31

Trademarks ..............31

Important notes .............32

Particulate contamination..........33

Documentation format...........33

Telecommunication regulatory statement ....34

Electronic emission notices .........34

Federal Communications Commission (FCC)

statement ..............34

Industry Canada Class A emission compliance

statement ..............34

Avis de conformité à la réglementation

d'Industrie Canada ...........34

Australia and New Zealand Class A statement . 35

European Union EMC Directive conformance

statement ..............35

Germany Class A statement ........35

Japan VCCI Class A statement .......36

Japan Electronics and Information Technology

Industries Association (JEITA) statement....36

Korea Communications Commission (KCC)

statement ..............37

Russia Electromagnetic Interference (EMI) Class

A statement .............37

People's Republic of China Class A electronic

emission statement ...........37

Taiwan Class A compliance statement ....37

Index ...............39

iv BladeCenter GPU Expansion Blade: Installation Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d'installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Guidelines for trained service technicians

This section contains information for trained service technicians.

Inspecting for unsafe conditions

Use this information to help you identify potential unsafe conditions in an IBM®

product that you are working on.

Each IBM product, as it was designed and manufactured, has required safety items

to protect users and service technicians from injury. The information in this section

addresses only those items. Use good judgment to identify potential unsafe

conditions that might be caused by non-IBM alterations or attachment of non-IBM

features or optional devices that are not addressed in this section. If you identify

an unsafe condition, you must determine how serious the hazard is and whether

you must correct the problem before you work on the product.

Consider the following conditions and the safety hazards that they present:

vElectrical hazards, especially primary power. Primary voltage on the frame can

cause serious or fatal electrical shock.

vExplosive hazards, such as a damaged CRT face or a bulging capacitor.

vMechanical hazards, such as loose or missing hardware.

To inspect the product for potential unsafe conditions, complete the following

steps:

1. Make sure that the power is off and the power cords are disconnected.

2. Make sure that the exterior cover is not damaged, loose, or broken, and observe

any sharp edges.

3. Check the power cords:

vMake sure that the third-wire ground connector is in good condition. Use a

meter to measure third-wire ground continuity for 0.1 ohm or less between

the external ground pin and the frame ground.

vMake sure that the power cords are the correct type.

vi BladeCenter GPU Expansion Blade: Installation Guide

vMake sure that the insulation is not frayed or worn.

4. Remove the cover.

5. Check for any obvious non-IBM alterations. Use good judgment as to the safety

of any non-IBM alterations.

6. Check inside the system for any obvious unsafe conditions, such as metal

filings, contamination, water or other liquid, or signs of fire or smoke damage.

7. Check for worn, frayed, or pinched cables.

8. Make sure that the power-supply cover fasteners (screws or rivets) have not

been removed or tampered with.

Guidelines for servicing electrical equipment

Observe these guidelines when you service electrical equipment.

vCheck the area for electrical hazards such as moist floors, nongrounded power

extension cords, and missing safety grounds.

vUse only approved tools and test equipment. Some hand tools have handles that

are covered with a soft material that does not provide insulation from live

electrical current.

vRegularly inspect and maintain your electrical hand tools for safe operational

condition. Do not use worn or broken tools or testers.

vDo not touch the reflective surface of a dental mirror to a live electrical circuit.

The surface is conductive and can cause personal injury or equipment damage if

it touches a live electrical circuit.

vSome rubber floor mats contain small conductive fibers to decrease electrostatic

discharge. Do not use this type of mat to protect yourself from electrical shock.

vDo not work alone under hazardous conditions or near equipment that has

hazardous voltages.

vLocate the emergency power-off (EPO) switch, disconnecting switch, or electrical

outlet so that you can turn off the power quickly in the event of an electrical

accident.

vDisconnect all power before you perform a mechanical inspection, work near

power supplies, or remove or install main units.

vBefore you work on the equipment, disconnect the power cord. If you cannot

disconnect the power cord, have the customer power-off the wall box that

supplies power to the equipment and lock the wall box in the off position.

vNever assume that power has been disconnected from a circuit. Check it to

make sure that it has been disconnected.

vIf you have to work on equipment that has exposed electrical circuits, observe

the following precautions:

– Make sure that another person who is familiar with the power-off controls is

near you and is available to turn off the power if necessary.

– When you work with powered-on electrical equipment, use only one hand.

Keep the other hand in your pocket or behind your back to avoid creating a

complete circuit that could cause an electrical shock.

– When you use a tester, set the controls correctly and use the approved probe

leads and accessories for that tester.

– Stand on a suitable rubber mat to insulate you from grounds such as metal

floor strips and equipment frames.

vUse extreme care when you measure high voltages.

Safety vii

vTo ensure proper grounding of components such as power supplies, pumps,

blowers, fans, and motor generators, do not service these components outside of

their normal operating locations.

vIf an electrical accident occurs, use caution, turn off the power, and send another

person to get medical aid.

Safety statements

These statements provide the caution and danger information that is used in this

documentation.

Important:

Each caution and danger statement in this documentation is labeled with a

number. This number is used to cross reference an English-language caution or

danger statement with translated versions of the caution or danger statement in

the Safety Information document.

For example, if a caution statement is labeled “Statement 1,” translations for that

caution statement are in the Safety Information document under “Statement 1.”

Be sure to read all caution and danger statements in this documentation before you

perform the procedures. Read any additional safety information that comes with

your system or optional device before you install the device.

Statement 1

viii BladeCenter GPU Expansion Blade: Installation Guide

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM Power AC922 8335-GTW Bedienungsanleitung

IBM

IBM 88371RU Betriebsanleitung

IBM

IBM 8647 - Eserver xSeries 225 Betriebsanleitung

IBM

IBM PS700 Installationsanleitung

IBM

IBM xSeries 346 Bedienungsanleitung

IBM

IBM 88631SU - System x3850 - 8863 Bedienungsanleitung

IBM

IBM 883725U Bedienungsanleitung

IBM

IBM System x3200 4362 Bedienungsanleitung

IBM

IBM 8685 - eServer xSeries 255 Bedienungsanleitung

IBM

IBM 72335LU - System x3850 M2 Bedienungsanleitung

IBM

IBM 88625RX Bedienungsanleitung

IBM

IBM eserver xSeries 440 Bedienungsanleitung

IBM

IBM 7985 Bedienungsanleitung

IBM

IBM 8672-26x Bedienungsanleitung

IBM

IBM 7947E3U Bedienungsanleitung

IBM

IBM Netfinity 3500 Bedienungsanleitung

IBM

IBM 71412RU Bedienungsanleitung

IBM

IBM System x3250 M3 Type 4251 Bedienungsanleitung

IBM

IBM xSeries 240 81Y Betriebsanleitung

IBM

IBM BladeCenter HS22V Handbuch

IBM

IBM RS/6000 7024 E Series Bedienungsanleitung

IBM

IBM 8853L6U Bedienungsanleitung

IBM

IBM BladeCenter HS22 Bedienungsanleitung

IBM

IBM 79784AU Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung