IBM XSeries 335 Bedienungsanleitung

IBM xSeries 335 Type 8676

Option Installation Guide

ERserver



IBM xSeries 335 Type 8676

Option Installation Guide

ER s e r v e r



Note:

Before using this information and the product it supports, read the general information in “Notices” on

page 41.

First Edition (August 2002)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introduction ......................1

Related publications .......................1

Notices and statements used in this book ...............2

Major components of the xSeries 335 Type 8676 server ..........3

System-board internal connectors ..................4

System-board switches and jumpers .................5

System-board external connectors ..................6

System-board LEDs .......................7

System-board option connectors ...................8

Light Path Diagnostics panel ....................9

Chapter 2. Installing options ...................11

Installation guidelines ......................11

System reliability guidelines ...................11

Handling static-sensitive devices .................11

Removing the cover and bezel ...................12

Working with adapters ......................13

Installing an adapter .......................15

Working with a hard disk drive ...................16

Installing a hot-swap hard disk drive ................17

Installing a non-hot-swap hard disk drive ..............17

Installing memory modules ....................19

Installing a microprocessor ....................21

Replacing the battery ......................25

Replacing a fan assembly .....................26

Completing the installation.....................27

Installing the cover and bezel ..................27

Cabling the server........................28

Cabling a C2T chain ......................28

Cabling an ASM interconnect network ...............32

Updating the server configuration ..................34

Chapter 3. I/O connectors ....................37

C2T connectors ........................37

C2T breakout cable connectors ...................37

Ethernet connector .......................38

Integrated system management connector ...............39

Serial connector ........................39

Universal Serial Bus connectors ..................39

Appendix. Notices .......................41

Edition notice .........................41

Trademarks ..........................42

Important notes.........................42

Electronic emission notices ....................43

Federal Communications Commission (FCC) statement .........43

Industry Canada Class A emission compliance statement ........44

Australia and New Zealand Class A statement ............44

United Kingdom telecommunications safety requirement.........44

European Union EMC Directive conformance statement .........44

Taiwanese Class A warning statement ...............44

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 45

Power cords ..........................45

Index ............................47

iv IBM xSeries 335 Type 8676: Option Installation Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalacítohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Lässäkerhetsinformationen innan du installerar den här produkten.

Statement 1

Danger

Electrical current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation, maintenance, or

reconfiguration of this product during an electrical storm.

vConnect all power cords to a properly wired and grounded electrical outlet.

vConnect to properly wired outlets any equipment that will be attached to this

product.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural

damage.

vDisconnect the attached power cords, telecommunications systems, networks, and

modems before you open the device covers, unless instructed otherwise in the

installation and configuration procedures.

vConnect and disconnect cables as described in the following table when installing,

moving, or opening covers on this product or attached devices.

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

Statement 2

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has a

module containing a lithium battery, replace it only with the same module type made

by the same manufacturer. The battery contains lithium and can explode if not

properly used, handled, or disposed of.

Do not:

vThrow or immerse into water.

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

vi IBM xSeries 335 Type 8676: Option Installation Guide

Statement 3

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could result in

exposure to hazardous laser radiation. There are no serviceable parts inside the

device.

vUse of controls or adjustments or performance of procedures other than those

specified herein might result in hazardous radiation exposure.

Danger

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the

following. Laser radiation when open. Do not stare into the beam, do not view directly with

optical instruments, and avoid direct exposure to the beam.

Statement 4

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Safety vii

Statement 5

CAUTION:

The power-control button on the device and the power switch on the power supply do

not turn off the electrical current supplied to the device. The device also might have

more than one power cord. To remove all electrical current from the device, ensure

that all power cords are disconnected from the power source.

Statement 8

CAUTION:

Never remove the cover on a power supply or any part that has the following label

attached.

Hazardous voltage, current, and energy levels are present inside any component that

has this label attached. There are no serviceable parts inside these components. If you

suspect a problem with one of these parts, contact a service technician.

Statement 10

CAUTION:

Do not place any object weighing more than 82 kg (180 lb) on top of rack-mounted

devices.

>82 kg (180 lb)

viii IBM xSeries 335 Type 8676: Option Installation Guide

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM Power System 9009-41A Bedienungsanleitung

IBM

IBM 8676 - Eserver xSeries 335 Bedienungsanleitung

IBM

IBM System x dx360 M3 Bedienungsanleitung

IBM

IBM x3455 - System - 7984 Bedienungsanleitung

IBM

IBM x3450 - System - 7948 Bedienungsanleitung

IBM

IBM 306m - eServer xSeries - 8849 Bedienungsanleitung

IBM

IBM Power System AC922 Bedienungsanleitung

IBM

IBM 88632SU Bedienungsanleitung

IBM

IBM BladeCenter HS23 Bedienungsanleitung

IBM

IBM SG24-4576-00 Kurzanleitung zur Einrichtung

IBM

IBM eserver xSeries 350 Bedienungsanleitung

IBM

IBM Power System E880C Gebrauchs- und Pflegehandbuch

IBM

IBM System x3620 M3 7376 Bedienungsanleitung

IBM

IBM NetVista N2200w Bedienungsanleitung

IBM

IBM PC Server 520 Bedienungsanleitung

IBM

IBM pSeries 670 Bedienungsanleitung

IBM

IBM 7953-94X Bedienungsanleitung

IBM

IBM System x3250 M3 Type 4251 Bedienungsanleitung

IBM

IBM 9040-MR9 Bedienungsanleitung

IBM

IBM Redboks System x3550 M4 Bedienungsanleitung

IBM

IBM 9040-MR9 Bedienungsanleitung

IBM

IBM pSeries 650 Bedienungsanleitung

IBM

IBM x3630 M3 7377 Bedienungsanleitung

IBM

IBM xSeries 300 Betriebsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

IBM xSeries 335 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken