IBM Deskstar 22GXP Bedienungsanleitung

IBM storage products

Installation guide

Deskstar 22GXP & 25GP

AT/IDE

DJNA-352500, DJNA-352030, DJNA-351520,DJNA-351010

DJNA-350510,DJNA-372200, DJNA-371800, DJNA-371350

DJNA-370910,DJNA-370450

Models:

Table of contents

Page 31

Glossary

.............................................................

....

Page 26

Warranty

.................................................................

Page 23

Appendix

................................................................

Page 21

Step 8: Operating system installation

..........................................

Page 21

Formatting

...............................................................

Page 18

FDISK

...................................................................

Page 18

Boot computer

............................................................

Page 16

Bios settings

.............................................................

Page 16

Step 7b: Custom install

.....................................................

Page 13

Ontrack Disk Manager

......................................................

Page 13

Step 7a: Easy install

........................................................

Page 13

Step 7: Installation and configuration

.........................................

Page 12

Step 6: Complete physical installation

.........................................

Page 12

Step 5: Connectors

........................................................

Page 11

Step 4: Mounting

..........................................................

Page 9

Step 3: Jumper settings

......................................................

Page 8

Step 2: Prepare for installation

................................................

Page 8

Step 1: Installation checklist

..................................................

Page 6

Hard disk drive installation flow chart

..........................................

Page 5

Hard disk drive handling guide

................................................

Page 4

Hardware description

........................................................

Page 3

Introduction

..........................................................

.....

IBM storage products

Page 2

IBM Hard Disk Drive Technical Support Center version 1.0

Introduction

This manual was prepared to help you install your IBM Deskstar 22GXP or 25GP hard drive in most

computer systems. If you do not feel comfortable installing this drive yourself, contact a qualified installer

to assist you.

International Business Machines Corporation provides this publication "AS IS" without warranty of any

kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability or

fitness for a particular purpose. Some states do not allow disclaimers of express or implied warranties in

certain transactions. Therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Product data and

specifications are subject to change without notice. Changes are periodically made to the information

herein; these changes will be incorporated in new editions of the publication. IBM may make

improvements or changes in the products or the programdescribed in this publication at any time.

This publication may contain reference to or information about IBM products (machines and programs),

programming, or services that are not available in your country. Such references or information must not

be construed to mean that IBM intends to make available such IBM products, programming, or services

in your country.

Product description data contained herein represents IBM’s design objectives and is provided for

comparison among IBM products; actual results may vary based on a variety of factors. Except as

explicitly stated in the Warranty section of this Guide, the product data contained herein does not

constitute a warranty. Questions regarding IBM warranty terms or the methodology used to derive data

should be referred to an IBM representative.

Technical information about IBM hard disk drive products can be obtained via the Internet at:

http://www.ibm.com/harddrive

or by calling the IBM Hard Disk Drive Technical Support Center at 888.426.5214.

Government Users - Documentation related to restricted rights - Use, duplication or disclosure is subject

to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

IBM is a registered trademark of the International Business Machines Corporation. The following are also

trademarks or registered trademarks of the International Business Machines Corporations in the United

States, other countries, or both: Deskstar, OS/2, and Surepath. Any other products or trademarks are

the property of their respective owners.

IBM storage products

Page 3

IBM Hard Disk Drive Technical Support Center version 1.0

Hardware description

The Deskstar 22GXP and 25GP are available in various models with the following options:

5,400

DJNA-350510

5.1GB

5,400

DJNA-351010

10.1GB

5,400

DJNA-351520

15.2GB

5,400

DJNA-352030

20.3GB

5,400

DJNA-352500

25GB

7,200

DJNA-370450

4.5GB

7,200

DJNA-370910

9.1GB

7,200

DJNA-371350

13.5GB

7,200

DJNA-371800

18GB

7,200

DJNA-372200

22GB

RPM

Model

Capacity

The Deskstar 22GXP and 25GP family has an advanced Ultra ATA interface that supports transfer rates

of up to 66.6 MB/sec. To take advantage of the higher transfer rate, your computer will need to have a

controller that supports the Ultra ATA/66 interface and a 40-pin, 80 conductor cable. If you have an older

interface such as Multi-word DMA Mode-2, PIO Mode-4, or Ultra ATA/33 the drive will still function, but

will be limited to data transfer speeds significantly lower than 66.6MB/sec due to the lower speed of your

controller. If you have a slower controller, you may wish to purchase an Ultra ATA/66 controller card to

take advantage of Deskstar’s 66.6MB/sec data transfer rate. An Ultra ATA/66 controller card will fit into

any available slot in your computer. At this printing, Promise Technology is the only company offering an

Ultra ATA/66 controller card. For more information, see their Web site at:

http://www.promise.com

The Deskstar 22GXP and 25GP are designed for desktop applications that demand advanced data

storage solutions, such as audio/video editing, computer-aided design and manufacturing (CAD/CAM),

3D graphics, animation and photo manipulation, Web page design, or data mining and warehousing.

They are ideal for use in entry servers, entry workstations, and desktop personal computers.

The Deskstar 22GXP and Deskstar 25GP families are designed to work with MMX systems.

Compatibility listings are included in the Appendix. Before you begin installation, please read the “Hard

disk drive handling guide” on the following page.

IBM storage products

Page 4

IBM Hard Disk Drive Technical Support Center version 1.0

Hard disk drive handling guide

These notes are designed to provide a simple overview of the need for cautionwhen handling a disk

drive.

Disk drives can be easily damaged by electrical static shock or rough handling. In order to minimize the

risk of damage to a disk drive, it is essential that the drive be handled while resting on a cushioned,

electrostatically safe surface. Examples of static-safe mats available at the time of this printing are 3M's

8210 table mat and 3M's "First Touch" computer pad.

Great care should be taken when handling disk drives. Do not bump them against any object. When

attaching brackets or mounting the drive in the computer, be very careful. It is very easy to

unintentionally introduce shocks which exceed specifications.

Please note that the capacity of each disk drive to withstand electrical or mechanical shock varies

according to its design. The IBM Hard Disk Drive Technical Support Center can advise you on the

suitability of your Deskstar drive for a specific application.

Damage incurred to a drive might not be immediately evident and could cause the drive to fail months

later.

IBM storage products

Page 5

IBM Hard Disk Drive Technical Support Center version 1.0

Hard disk drive installation flow chart

IBM storage products

Page 6

IBM Hard Disk Drive Technical Support Center version 1.0

Step 1

Installation checklist

Page 8

Step 2

Prepare for installation

Page 8

Step 3

Jumper

settings

Page 9

Step 5

Connectors

Page 12

Connect cable to add-on

Ultra ATA/66 controller

Page 12

Connect cable

to onboard IDE

ports

Page 12

Secondary

port

Page 12

Primary

port

Page 12

Step 4

Mounting the drive

Page 11

Step 6

Complete

physical

installation

Page 12

Step 7

Installation and

configuration

Page 13

Step 7a

Easy Install

Page 13

Step 7b

Custom Install

Page 16

Ontrack® Disk Manager

Page 13 BIOS settings

Page 16

Boot computer

Page 18

FDISK

Page 18

Formatting

Page 21

Step 8

Install operating system if required

Page 21

Step 1: Installation checklist

To install the Deskstar drive you may need the following items depending on your computer:

ŸThe installation kit (as shown in the diagram below) containing the Deskstar drive,4 mounting

screws, IDE cable, Ontrack® Disk Manager, and any related publications. Save the box the drive

came in.

ŸThe documentation that came with your computer or storage enclosure.

ŸA small, flat-blade screwdriver.

ŸAn IDE controller, which is either built in or an adapter inside your computer, and any related

documentation.

ŸMounting brackets, if required for your computer. Contact your place of purchase if you are not

certain if mounting brackets are required.

ŸA bootable DOS diskette. (See the section entitled Making a Bootable Diskette in the Appendix.)

ŸIf you are replacing an older internal drive with the new Deskstar drive and want to copy all of the

files from the older drive to your new one, you may need additional software. (See the section

entitled Drive Copy in the Appendix.)

IBM storage products

Page 7

IBM Hard Disk Drive Technical Support Center version 1.0

Installation

Guide

Ontrack

Jumpers

Screws

Screwdriver

Disk Manager

IDE Cable

Installation Guide

Hard Disk Drive

Step 2: Prepare for installation

Begin by backing up your existing drive to avoid any loss of data during installation. (See the section

entitled Backup and Restore in the Appendix.) After completing the backup, shut down as normal.

Opening your computer

ŸTurn the system off.

ŸUnplug the power cord from the wall outlet.

ŸRemove all cables from the back of your computer, labeling them if necessary.

ŸRemove the cover from your computer. (Consult your user's guide for instructions if needed.)

Unpackaging your hard drive

ŸIf available, use an ESD (Electronic Static Discharge) wrist strap while handling your drive.

ŸIf an ESD wrist strap is not available, discharge static electricity by establishing a common voltage

between your body and the hard drive. Simultaneously touch the hard drive in its anti-static bag and

an unpainted metal surface on the outside of your computer system with your bare hands.

ŸRemove the drive from the anti-static package that it was shipped in. Handle the drive only by the

sides and avoid excessive movement until the drive has been mounted.

ŸDo not touch the main computer chip board.

ŸDo not drop the drive. A drop from only 1/4 inch could permanently damage your hard drive.

ŸPlace the drive carefully on a static free area.

ŸRecord the following information:

Drive Model ________________ Date of Purchase_________________

Drive P/N __________________ Place of Purchase_________________

Serial # ____________________

ŸIf you currently have a hard drive in your system you may want to record the CMOS settings. This

information is in your BIOS setup. You can enter your BIOS setup by pressing the key sequence for

your system while booting. (See Custom Install on page 16.)

Cylinders _______________________ Sectors/Track_____________________

Heads __________________________ Landing Zone _____________________

Write Pre Comp (if you have this category) __________________

Note:Do not low-level format your drive! IBM drives are low-level formatted by the manufacturer and

reformatting may cause permanent damage to your drive and your system. (See the section entitled

Utilities in the Appendix.)

IBM storage products

Page 8

IBM Hard Disk Drive Technical Support Center version 1.0

Step 3: Jumper settings

The jumper settings are found on the hard drive next to the interface connector, as shown below.

Jumper settings are physical settings that must be changedfor different uses of ahard drive. If your

drive will be used as a single drive or as a boot drive, no changes are required. The drive is shipped with

jumpers set for Master.

Master

This setting should be used if you are removing your current drive from the system and replacing it with

the Deskstar drive. Place a jumper on pins A-B and G-H to make this drive the Master.

Slave

Use this setting if you want to retain your old drive as the boot drive and have the new drive available for

program and data storage. Place a jumper on pins A-B and C-D to make this drive the Slave.

Cable Select

This setting should be used if your system requires special “cable select” cables. Place a jumper on pins

A-B and E-F for Cable Select.

Slave Present

This setting should be used if your BIOS setup does not detect the slave drive. Place a jumper on pins

E-F and G-H.

IBM storage products

Page 9

IBM Hard Disk Drive Technical Support Center version 1.0

Some BIOSs have a limitation when translating the cylinder, head, and sector information which prevents

them from correctly detecting the capacity of larger drives. If your BIOS is reporting the Deskstar’s

capacity incorrectly, use the 15 logical head settings rather than the 16 logical heads, shown below.

Jumper settings

IBM storage products

Page 10

IBM Hard Disk Drive Technical Support Center version 1.0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Lagerung Handbücher

IBM

IBM System storage DS6000 Series Bedienungsanleitung

IBM

IBM System Storage DS5020 Installationsanleitung

IBM

IBM TU3 2104 Handbuch

IBM

IBM Travelstar 20GN Bedienungsanleitung

IBM

IBM Deskstar 14GXP Bedienungsanleitung

IBM

IBM eserver p Series Bedienungsanleitung

IBM

IBM FlashSystem 5000 Series Bedienungsanleitung

IBM

IBM Storwize V7000 Betriebsanleitung

IBM

IBM DJNA-352500 Bedienungsanleitung

IBM

IBM ThinkPad Dock II Bedienungsanleitung

IBM

IBM Travelstar 40GNX Bedienungsanleitung

IBM

IBM Travelstar 4GN Bedienungsanleitung

IBM

IBM N6000 Series Bedienungsanleitung

IBM

IBM Slicestor 2448 Bedienungsanleitung

IBM

IBM ATA-3 Bedienungsanleitung

IBM

IBM Ultrastar 36LP Installations- und Betriebsanleitung

IBM

IBM 3409-S03 Bedienungsanleitung

IBM

IBM magstar mp 3570 Einrichtungshandbuch

IBM

IBM Cloud Object Storage System Betriebsanleitung

IBM

IBM System storage DS6000 Series Installationsanleitung

IBM

IBM Travelstar 6GT Bedienungsanleitung

IBM

IBM Deskstar Deskstar 4 Bedienungsanleitung

IBM

IBM CD-RW/DVD-ROM Combo Drive Bedienungsanleitung

IBM

IBM System Storage N3220 Handbuch

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung