IBM Flex System Fabric EN4093 Bedienungsanleitung

Configuring the IBM Flex System Fabric EN4093 0Gb Scalable Switch

Prerequisites:

One IBM Flex System Enterprise Chassis and one IBM Flex System Fabric EN4093 0Gb Scalable

Switch installed in I/O module bay or 2.

An Ethernet network is already configured.

Steps:

Note: This process illustrates how to enable the switch ports through the Chassis Management Module

(CMM) command-line interface. For information about using the CMM interface, you can use the

“Configuring IBM Flex System Enterprise Chassis components” quick start guide. You can find that quick

start guide at this location:

In the information center (Internet):

http://pic.dhe.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.commontasks.doc/commonta

sks_chassis_config.html

The IBM Flex System product documentation is also available on the IBM Flex System Manager management node. To access

the installed documentation, click Information Center from the IBM Flex System Manager Home page and then navigate to:

IBM Flex System information -> Quick start guides -> Installing and configuring the IBM Flex System Enterprise Chassis

. Log on to the Chassis Management Module (CMM) CLI with an SSH application. The default IP

address is 92. 68.70. 00 and the default login/password is USERID/PASSW0RD. If necessary, obtain

the IP address and login of the CMM from your system administrator.

2. Set the environment to the bay where you installed the switch. Example for bay 2:

env -T system:switch[2]

3. Run the following command to enable external data ports:

ifconfig -ep enabled

External ports – 0 are now enabled for data throughput.

Page of 2

Activating additional keys:

If you have purchased additional keys, they need to be installed on the switch. Complete the following

steps to install additional keys using the ISCLI interface.

. To retrieve the key, navigate a browser to https://www.ibm.com/systems/x/fod/index.wss and

sign in with your ID and password.

2. Click Request activation key.

3. Enter the authorization code. The authorization code was supplied to you by email or on paper

as part of the ordering process.

4. Click Continue and follow the instructions and download the key file.

5. Log on to the EN4093 switch with an SSH application. The default IP addresses for the switch

through the CMM are as follows: 92. 68.70. 20 (bay ), 92. 68.70. 2 (bay 2),

92. 68.70. 22 (bay 3), 92. 68.70. 23 (bay 4). If necessary, obtain the IP address from your

system administrator.

6. Enter ena.

7. Enter software-key.

8. Enter enakey address <hostname or IP address> keyfile <file name>

protocol tftp mgt-port

Note: you must reset the switch to apply the key.

9. Reset the switch. Enter reload.

Repeat these steps for additional keys, if needed. The sequence of steps is shown here:

Router#ena

Router(config)#software-key

Router(Software-Key)#enakey address 9.44.143.206 keyfile

ibm_fod_0007_ 010CM28N001_anyos_noarch.key protocol tftp mgt-port

Starting download key file...

Key file download complete (494 bytes)

Software feature Upgrade1 will be Active upon next reboot.

Aug 5 11:47:39 1080:0:0:0:0:0:0:82 NOTICE mgmt: Software feature Upgrade1

will be Active upon next reboot.

A Reboot is required for the new settings to take effect.

Router(Software-Key)#reload

...

Resetting at 11:47:59 Tue Aug 5, 2014...

Page 2 of 2

Inhaltsverzeichnis

Andere IBM Schalten Handbücher

IBM

IBM BNT Bedienungsanleitung

IBM

IBM J08E Bedienungsanleitung

IBM

IBM 17353LX - 1x8 Console Switch Bedienungsanleitung

IBM

IBM CN4093 Bedienungsanleitung

IBM

IBM 17352GX Bedienungsanleitung

IBM

IBM RackSwitch G8264CS Bedienungsanleitung

IBM

IBM pSeries Kurzanleitung

IBM

IBM Flex System EN4023 Bedienungsanleitung

IBM

IBM F12 Bedienungsanleitung

IBM

IBM RedBooks SAN24B-5 Bedienungsanleitung

IBM

IBM 3110X - Cisco Catalyst Switch Handbuch

IBM

IBM SAN16B-2 - TotalStorage Express Model Switch Fehlerbehebungshandbuch

IBM

IBM 612 Bedienungsanleitung

IBM

IBM 1735R16 Benutzerhandbuch

IBM

IBM Flex System EN2092 Bedienungsanleitung

IBM

IBM Storage Networking SAN128B-6 Handbuch

IBM

IBM 6 MPLS Bedienungsanleitung

IBM

IBM 8237 Bedienungsanleitung

IBM

IBM 8271 Nways Ethernet LAN Switch Bedienungsanleitung

IBM

IBM 2498B24 - System Storage SAN24B-4 Switch Handbuch

IBM

IBM F16 Bedienungsanleitung

IBM

IBM T860 Bedienungsanleitung

IBM

IBM Flex System EN2092 Bedienungsanleitung

IBM

IBM SAN48C-6 Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung