IBT Technologies IBT-3601 Bedienungsanleitung
IBT-3601
7" TouchScreen with EDEN C3 Embedded Processor
•C T/Panel 7"•CompactFlash•133MHz FSB•
•ATA/33/66/100•Mini PCI•SO-DIMM•
•LAN•Audio•S-232/422/485•
•4COM•PC/104•USB•TV-Out•DOC•
•WDT•H/W Monitor•Single +5V•
•Industrial Embedded Single Board computer•
Copyright Disclaimers:
The accuracy of contents in this manual has passed thorough checking and review before
publishing. IBT Technologies Inc., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted all documentation rights.
nauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by the publisher.
The publisher reserves the right to change or improve the contents of
this document without due notice. The manufacturer and publisher assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
Trademarks:
IBT is a registered trademark of IBT Technologies Inc.
VIA is a registered trademark of VIA Technologies, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2004 All RightsReserved.
Edition 1.5, November12, 2004
Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 3
1.3 Board Dimensions................................................................. 4
Chapter 2 Unpacking ..................................................5
2.1 Opening the Delivery Package............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3 Hardware Installation ..............................7
3.1 Before Installation ................................................................. 7
3.2 Board Layout ......................................................................... 8
3.3 Jumper List ............................................................................ 9
3.4 Connector List ....................................................................... 9
3.5 Configuring the CPU ........................................................... 10
3.6 System Memory ................................................................... 10
3.7 DiskOnChipAddress Setting .......................................... 10
3.8 VGA Controller .................................................................... 12
3.9 PCI E-IDE Drive Connector................................................. 14
3.10 Floppy Disk Drive Connector ............................................. 15
3.11 Serial Port Connectors ....................................................... 16
3.12 Parallel Connector............................................................... 18
3.13 Ethernet Connector............................................................. 19
3.14 USB Connector.................................................................... 19
3.15 CMOS Data Clear................................................................. 19
3.16 Power and Fan Connectors................................................ 20
3.17 Keyboard/Mouse Connectors ............................................ 20
3.18 System Front Panel Connectors........................................ 21
3.19 Watchdog Timer .................................................................. 22
3.20 Mini PCI Connector ............................................................. 24
3.21 PC/104 Connectors ............................................................. 26
3.22 Audio Connectors ............................................................... 28
3.23 CompactFlashConnector................................................ 28
3.24 Game Port Connector ......................................................... 29
3.25 TV-Out Connector ............................................................... 30
Chapter 4 AMI BIOS Setup.....................................31
4.1 Starting Setup...................................................................... 31
4.2 Using Setup ......................................................................... 32
4.3 Main Menu............................................................................ 33
4.4 Standard CMOS Setup ........................................................ 34
4.5 Advanced CMOS Setup ...................................................... 35
4.6 Advanced Chipset Setup.................................................... 36
4.7 Power Management Setup ................................................. 37
4.8 PCI / Plug and Play Setup................................................... 38
4.9 Peripheral Setup.................................................................. 39
4.10 Hardware Monitor Setup..................................................... 40
4.11 Auto-Detect Hard Disks ...................................................... 40
4.12 Change Supervisor/User Password .................................. 41
4.13 Auto Configuration with Optimal Settings ....................... 42
4.14 Auto Configuration with Fail Safe Settings...................... 43
4.15 Save Settings and Exit........................................................ 44
4.16 Exit Without Saving............................................................. 45
Chapter 5 Software Utilities..................................... 47
5.1 IDE Driver Installation ......................................................... 47
5.2 VGA Driver Installation ....................................................... 52
5.2.1 VGADriverInstallationforWIN95/98/2K........................................52
5.2.2 VGADriverInstallationforWINNT4.0................................................55
5.3 LAN Driver Installation........................................................ 58
5.3.1 LANDriverInstallationforWIN95/98/2K.........................................58
5.3.2 LANDriverInstallationforWINNT4.0.................................................64
5.4 Audio Driver Installation..................................................... 74
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
• Do not remove boards or integrated circuits from their anti-
static packaging until you are ready to install them.
• efore handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few seconds.
This helps to discharge any static electricity on your body.
• Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before you open the I T3601 ensure
harmlessly discharge any static electricity through the strap.
• Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE COMPONENTS
WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS.
Chapter 1
General Description
The I T3601 is a Touch Screen of 7” with a fan less computer using the
latest technologies.
The motherboard is a 100/133MHz FS VIA VT8606 chipset-based
board designed with a MiniPCI Local us VIA C3 EDEN 667MHz
Embedded CPU. These features combine and make an ideal all-in-one
industrial single board computer. Additional features include an
enhanced I/O with CRT/Panel, LAN, Audio, TV-Out, and 4COM ports
interfaces.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows the
motherboard to support data transfers of 33, 66 or 100M /sec. to one
IDE drive connection. Designed with the VIA VT8606 core logic chipset,
the board supports VIA C3 EDEN 667MHz Embedded CPU. The VIA
VT8606 integrated S3 3D supporting CRT/Panel displays up to 1920 x
1440 but your LCD touchscreen is a 640 x 480 display, if you exceed the
size you will have automatic screen scroll..
System memory is also sufficient with the one SO-DIMM socket that can
support up to 256M .
Additional onboard connectors include an advanced US port providing
faster data transmission, a DOS-compatible DiskOnChip socket with a
maximum capacity of 288M . And one external RJ-45 connector for
10/100 ased Ethernet use.
To ensure the reliability in an unmanned or standalone system, the
Watchdog Timer (WDT) onboard is designed with pure hardware that
does not need the arithmetical functions of a real-time clock chip. If any
program causes unexpected halts to the system, the onboard Watchdog
Timer (WDT) will automatically reset the CPU or generate an interrupt to
resolve such condition.
1.1 Major Features
The motherboard comes with the following features:
• 7” LCD touch screen
• VIA C3 EDEN 400/667/733MHz Embedded Low Power CPU
• VIA VT8606/VT82C686 system chipset
• Mini PCI Local us support
• Supports 100/133MHz FS
• One SO-DIMM socket with a max. capacity of 256M
• SMC 37C669, VIA VT82C686 super I/O chipset
• Fast PCI ATA/33/66/100 IDE controller
• Three RS-232 and one RS-232/422/485 serial ports
• RealTek RTL8100 10/100 ased LAN
• AC97 3D audio controller
• DiskOnChip™ socket supporting memory size of up to 288M
• Two US connectors
• Supports CompactFlash card reader
• Supports Hardware Monitor function
1.2 Specifications
CPU: VIA C3 EDEN 400/667/733MHz Embedded Low Power CPU
Bus Interface: Mini PCI Local us
Memory: One SO-DIMM socket supporting up to 256M
Chipset: VIA VT8606/VT82C686
I/O Chipset: SMC 37C669, VIA VT82C686
CompactFlash: One standard CompactFlash adapter
VGA: VIA VT8606 integrated S3 3D supporting CRT/Panel displays up to 1920 x 1440
IDE: Two IDE disk drives supporting ATA/33/66/100 and with transfer rates of up to 33/66/100M /sec.
FDD: Supports up to two floppy disk drives
Parallel: One enhanced bi-directional parallel port supporting SPP/ECP/EPP
LAN: RealTek RTL8100 10/100 ased LAN
Audio: AC97 3D audio controller
Serial Port: 16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 3 serial ports with 16-byte FIFO
PC/104: PC/104 connector for 16-bit ISA us
USB: Two US connectors
TV-Out: Supports PAL or NTSC TV systems (optional)
Keyboard/Mouse: PS/2 6-pin Mini DIN or 6-pin connector
DiskOnChip™: DiskOnChip™ socket supporting memory sizes of up to 288M
BIOS: AMI PnP Flash IOS
Watchdog Timer: Sets 1, 2, 10, 20, 110, 220 seconds, activity trigger with Reset or NM
CMOS: attery backup
Power: Single +5V/3.2A power in
Operating Temperature: -15 ~ +60°C
Hardware Monitor: VIA VT82C686
Board Size: 14.5 x 10.2 cm
1.3 Specifications
Inhaltsverzeichnis
Beliebte Touch-Screen Handbücher anderer Marken
Elecro Engineering
Elecro Engineering Poolsmart Plus Montageanleitung
Johnson Controls
Johnson Controls IQ4 HUB Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET2270L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET1002L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems 3201L Bedienungsanleitung
Duratec
Duratec S15 Bedienungsanleitung
