1. Installation Instructions
1. Carefully unpack the instrument and place it on a stable, clean, non-slip, and fireproof surface.
2. Ensure a good working environment free of any combustible media or flammable materials to avoid
additional hazards.
3. Place the shaker at a distance of more than 10cm from the wall and other units if using multiple units
together.
4. Ensure that there is no accidental spillage during speed setting.
5. Do not use any combustible media or flammable materials to avoid any additional hazards.
6. Ensure that the label indicates the correct voltage before connecting the unit to the power supply.
7. Do not operate the unit with a damaged power cord.
8. Disable the power supply while fitting the accessories.
9. Ensure that the unit and its accessories are in good working condition before each operation.
2. Operating Procedure
1. Switch ON the power and the instrument will start self-checking.
2. Press the “Mode” key and the unit will enter the adjustment mode.
3. Press the “+/-” keys and confirm the set speed and time. Adjust the speed and time to the desired
settings.
4. Press the “Start” key and the instrument will begin shaking.
5. Press the “Stop” key to stop the operation and return the unit to adjustment mode.
3. Troubleshooting and Error Code Information
