1) Real Time Setting: Press the SET button once, hour blinking, press the ▲ button to set
hour, press the SET button once, minutes flash, press the ▲ button to set minutes.
2) The timing for the machine start on time setting: press the SET button 3 times, hour
blinking, press the ▲ button to set hour, press the SET button once, minutes flash, press
the ▲ button to set minutes;
3) Set the machine power off time: Press the SET button 5 times, hour blinking, press the ▲
button to set hour, press the SET button once, minutes flash, press the ▲ button to set
minutes;
4) The timer functions take on use: Press ▲ to set timer, set the cycle timer function mode: time
power on→time power off→time off power on and off, power on default time is 8:00, power
off default time is 12:00.
IX. Se f-C ean Mode Operating Instructions:
The self-clean mode should be put into operation before you use your ice maker for the first time
and/or if there has been a long period without use.
Three Icons as Large, Medium and small Icons will be on at the same time when the ice maker is
in self-clean mode.
Stage 1
1. Add equal parts of water and vinegar (1:1) to the ice maker’s reservoir.
2. With the stand-by mode, hold ON/OFF button at least 5 seconds until it makes a “BEEP”
noise to activate the self-clean mode.
3. During the self clean mode, the upper water bucket is filled and dumped. The pump will
remain in continuous operation as it feeds water to the bucket and evaporator coils. This cycle
will repeat five times.
4. Upon completion, the unit automatically changes to stand-by mode.
Stage 2
1. Drain the cleaning solution from the internal reservoir by removing the rear drain cap and
plug.
2. Add fresh water to the Max. fill line.
3. With the stand-by mode, hold ON/OFF button at least 5 seconds until it makes a “BEEP”
noise to activate the self-clean mode again which will now act as a rinse.
4. Upon completion of this final stage of the self clean process, the unit automatically changes to
