Icom IP100H Bedienungsanleitung

Version 1.0

March 2014

IP Advanced Radio System

IP100H / IP1000C / IP100FS

Demonstration Setup

Guide

DGX-IP1000C/IP100H -V1.0

This guide is designed to provide demonstration setup guide about Icom’s IP ADVANCED RADIO SYSTEM,

based on the IP100H’s firmware Revision 1.02 and IP1000C’s firmware Revision 1.02.

If you have any questions about this guide, please contact your local Icom distributors.

Guide Revisions

Icom reserves the right to make changes to the content of this guide at any time without notice or obligation.

Trademarks

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United

States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries.

Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

IDAS is a trademark of Icom Incorporated.

OUTLINE

DGX-IP1000C/IP100H -V1.0

SECTION 1 REQUIRED EQUIPMENT .....................................................................................................1

SECTION 2 SETTING EXAMPLES ..........................................................................................................2

2-1 STAND ALONE NETWORK CONNECTION AND IP ADDRESS SETTINGS............2

2-2 IP NETWORK CONNECTIONS AND SETTING EXAMPLES.....................................9

2-3 HOW TO SET AND USE THE ID LIST......................................................................16

2-4 HOW TO ENTER AND SEND A MESSAGE.............................................................21

2-5 HOW TO SET AND USE THE IP100FS....................................................................27

SECTION 3 Q & A...................................................................................................................................51

TABLE OF CONTENTS

DGX-IP1000C/IP100H -V1.0

The following equipment is required to demonstrate the system.

IP1000C

IP100H (2 units)

Access point

•IEEE802.11a/g

•Recommendation:

Optional AP-90M

With one of the following OSs

installed.

• Windows8 (32/64bit)

• Windows7 (32/64bit)

• Windows Vista(32bit)

(Home Premium / Professional /

Ultimate (or equivalent) editions

are supported.)

IP100FS

LAN cable (2 cables)

CLONING CABLES

(For IP100H, both cables are

required)

• OPC-2144

• OPC-478UC

CLONING SOFTWARE

(For IP100H)

CS-IP100H

SECTION 1 REQUIRED EQUIPMENT

DGX-IP1000C/IP100H -V1.0

Set an access point, PC, IP1000C and IP100H using the following steps.

STEP 1: CONNECTION EXAMPLE

See each equipment’s instruction manual for connection details.

SECTION 2 SETTING EXAMPLES

2-1 STAND ALONE NETWOR

CONNECTION AND IP ADDRESS SETTINGS

IMPORTANT! We recommend that you connect the access point, IP1000C and PC in a standalone

configuration. If you connect them to your local network with the following connection settings, your local

network may not operate correctly. (IP addresses may overlap.)

STEP 1: CONNECTION EXAMPLE

STEP 2: ACCESS POINT SETTINGS

STEP 5: DEMONSTRATION

STEP 3: IP1000C SETTINGS

STEP 4: IP100H SETTINGS

STEP 1 STEP 2 STEP 3 STEP 5STEP 4

Access point

IP address: 192.168.0.50

Subnet mask: 255.255.255.0

IP1000C

IP address: 192.168.0.1

Subnet mask: 255.255.255.0

DHCP Server:Enable PC

IP address: 192.168.0.70

Subnet mask: 255.255.255.0

IP100H (TR 2)

DHCP Client: Enable IP100H (TR 1)

DHCP Client: Enable

[LAN]

[LAN 1]

[

LAN 2

]

[LAN]

LAN cable

DGX-IP1000C/IP100H -V1.0

STEP 2: ACCESS POINT SETTINGS

Set your access point’s IP address to 192.168.0.50, and SSID to WAVEMASTER-0.

[RECOMMENDATION]

We recommend that you set the access point’s authentication as follows:

For example:

• Authentication: WPA-PSK·WPA2-PSK

• Encryption Type: TKIP·AES

• PSK: 5cf97dgh6

STEP 3: IP1000C SETTINGS

Setting steps are as follows.

STEP 3-1 The DHCP Server settings

STEP 3-2 Common settings

STEP 3-3 The IP100H (TR 1) settings

STEP 3-4 The IP100H (TR 2) settings

STEP 3-1 The DHCP Server settings

IMPORTANT! If you turn ON the Hide SSID function when using IEEE802.11a, the IP100Hs may not

connect to the access point.

Select

Click

STEP 1 STEP 2 STEP 3 STEP 5STEP 4

DGX-IP1000C/IP100H -V1.0

STEP 3-2 Common settings

Click

Confirm

DGX-IP1000C/IP100H -V1.0

STEP 3-3 The IP100H (TR 1) settings

STEP 3-4 The IP100H (TR 2) settings

[Confirm the IP100H (TR 1 and TR 2) settings]

Click

Enter

Click

Confirm

DGX-IP1000C/IP100H -V1.0

STEP 4: IP100H SETTINGS (A CS-IP100H is necessary to set up the IP100H)

BEFORE you use a CS-IP100H, the following procedures are required. See the CS-IP100H and OPC-

478UC instruction manuals for setting and installation details.

• Install the CS-IP100H (Cloning software)

• Install the OPC-478UC (Cloning cable)’s USB driver

• Connect the OPC-478UC and the IP100H

• Run the CS-IP100H

The setting steps are as follows:

STEP 4-1 TR 1 settings

STEP 4-2 TR 2 settings

STEP 4-1 TR 1 settings

IP1000C’s setting screen

Enter the same SSID as the access point

Enter the same PSK as the access point

(Enter “5cf97dgh6” here)

Select

STEP 1 STEP 2 STEP 3 STEP 5

STEP 4

DGX-IP1000C/IP100H -V1.0

STEP 4-2 TR 2 settings

Enter the same SSID as the access point

Enter the same PSK as the access point

(Enter “5cf97dgh6” here)

Select

IP1000C’s setting screen

Andere Handbücher für IP100H

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Icom Zwei-Wege-Funkgerät Handbücher

Icom

Icom IC-F1020 Bedienungsanleitung

Icom

Icom IC-F5400 Series Bedienungsanleitung

Icom

Icom IC-F3 Bedienungsanleitung

Icom

Icom IC-GM1600 Bedienungsanleitung

Icom

Icom UT-109 Bedienungsanleitung

Icom

Icom CS-F14 Bedienungsanleitung

Icom

Icom IC-2SA Bedienungsanleitung

Icom

Icom IC-GM1500 Bedienungsanleitung

Icom

Icom ID-800H Montage- und Bedienungsanleitung

Icom

Icom IC-F3032T Bedienungsanleitung

Icom

Icom IC-V80E Montage- und Bedienungsanleitung

Icom

Icom IC-910H Betriebsanleitung

Icom

Icom IC-F620 Montageanleitung

Icom

Icom IC-FR3000 Series Bedienungsanleitung

Icom

Icom IC-SAT100 Installationsanleitung

Icom

Icom IC-F3001 Bedienungsanleitung

Icom

Icom IC-775DSP Betriebsanleitung

Icom

Icom IC-718 Bedienungsanleitung

Icom

Icom IC-A24 Bedienungsanleitung

Icom

Icom IC-A3 Bedienungsanleitung

Icom

Icom IC-F4TR Bedienungsanleitung

Icom

Icom IC-A23 Administratorhandbuch

Icom

Icom UT-111 Bedienungsanleitung

Icom

Icom IC-2200H Montage- und Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung