ICON QCon EX G2 Bedienungsanleitung

User manual

MIDI/Audio control surface with motorized faders

for production

Important Safety Instructions

1. Read this manual thoroughly before using this unit.

2. Keep this manual for future reference.

3. Take notice of and comply with all warnings included in the user's manual or indicated on the

appliance.

4. Follow all instructions included in this manual.

5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this

unit.

6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft

cloth.

7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install

in accordance with the manufacturer's instructions.

8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat-

producing appliances.

9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding-type plug has two blades and a third

grounding prong. These are designated for your safety. If the provided plug does not fit into your

outlet, consult an electrician.

10. Protect the power cord from being walked on or otherwise damaged by items placed on or

against them. Particular attention should be given to the plugs, receptacles, and the point where

the cord exits the appliance.

11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in

operation.

12. Only use attachments/accessories specified by the manufacturer.

13. Unplug this unit and all connected electrical equipment during lightning storms or when left

unused a long period of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has

been damaged in any way or fails to operate normally.

WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture

Contents

Introduction ....................................................................................................................... ..4

What's in the package? ....................................................................................................... 4

Features .............................................................................................................................. 5

Top Panel Layout................................................................................................................. 6

Rear Panel Layout............................................................................................................... 8

Bottom Panel Layout ........................................................................................................... 9

Getting Started (Connected with QconEX G2 (1 - 3units)................................................. 10

Cubase .............................................................................................................................. 14

Logic Pro ........................................................................................................................... 16

Pro Tools............................................................................................................................ 18

Getting Started .................................................................................................................. 20

Connecting Your QconEX G2 Controller ........................................................................... 20

Cubase .............................................................................................................................. 22

Nuendo.............................................................................................................................. 23

Logic Pro ........................................................................................................................... 24

Samplitude......................................................................................................................... 25

Bitwig................................................................................................................................. 27

Reason .............................................................................................................................. 28

Reaper............................................................................................................................... 29

Studio One......................................................................................................................... 30

Ableton Live....................................................................................................................... 31

Pro Tools............................................................................................................................ 32

Audition.............................................................................................................................. 33

Sonar................................................................................................................................. 34

iMapTM Software for Mac OS X.......................................................................................... 36

Installing iMapTM Software for Windows............................................................................. 36

iMapTM QconEX G2 software panel................................................................................ 39

Connections....................................................................................................................... 40

Firmware upgrade ............................................................................................................. 41

Restore the factory default settings................................................................................... 44

Specications .................................................................................................................... 45

Services............................................................................................................................. 46

Introduction

What's in the package?

Thank you for purchasing the ICON ProAudio QconEX G2 Midi/Audio control

surface. We sincerely trust this product will provide years of satisfactory service, but

if anything is not to your complete satisfaction, we will endeavor to make things right.

In these pages, you'll nd a detailed description of the features of the QconEX G2,

as well as a guided tour through its front and side panels, step-by-step instructions

for its setup and use, and full specications.

You'll also nd a warranty card enclosed - please don't forget to ll it out and mail

it so that you can receive online technical support at: www.iconproaudio.com, and

so we can send you updated information about these and other ICON ProAudio

products in the future. As with most electronic devices, we strongly recommend you

retain the original packaging. In the unlikely event the product must be returned for

servicing, the original packaging (or reasonable equivalent) is required.

With proper care and adequate air circulation, your QconEX G2 will operate without

any trouble for many years. We recommend that you record your serial number in

the space provided below for future reference.

Please write your serial number here for future reference:

Purchased at:

Date of purchase:

●QconPro EX G2 USB-MIDI Controller x 1pc

●CD x 1

App software – iMap (Mac & Windows)

User manual & QSG

●Quick Start Guide x 1

●USB2.0 Cable x 1

●AC adaptor x 1pc

●Screwdriver x 1

Features

●8 touch-sensitive motorized channel faders

●12-segment LED level metering for channels

●8 x dual function encoder knobs (Enter & rotate)

●11-segments LED surrounding the encoders to indicate the rotating position

●Large backlit LCD to display channel name, control values etc. for each channel

●Illuminated buttons for each channel including Rec-enable, Solo, Mute, Select and

Monitor

●MackieControl and HUI Universal emulation

●iMap - Self midi mapping software is provided for user-dened mode (MIDI Learn)

●Expandable to 32-channel control surface with 3units of QconEX G2 and a

QconProG2

●User A & User B 1/4” TRS connectors for connecting with pedals

●Class-compliant with Windows XP, Vista (32-bit), Windows 7/8/10 (32-bit & 64-

bit), and Mac OS X (IntelMac)

●USB 2.0 high speed connectivity

●Firmware upgrade available simply via USB connection and iMap software

●Robust aluminum and metal casing with Kensington lock port

Top Panel Layout

1. LCD backlit display

The two-line backlit LCD display shows the parameter values as you adjust them

and also provides feedback about channel selections, operating modes, and

more.

2. Channel faders

The eight 100mm motorized faders are generally used for controlling the track

volume of your DAW. Depending on your DAW, you may use the “Flip” button to

switch the function of these faders to change other settings. They are all touch

sensitive to allow override automation the moment you touch a fader. Also,

they are motorized; they will automatically move to reect the current level of

the selected channels in your DAW application. Any automation recorded in a

project will be reected by the fader positions. Any parameter adjustments made

with these faders will be displayed directly above on the LCD display.

Note: Function operates slightly difference between DAWs. Please refer to your

DAW manual for each function and overlap the provided labeling template according

to your currently used DAW. The following description is based on the functions that

operate in Apple Logic.

3. Channel level metering

The 12-led meter shows the associated channel level.

4. Dual function encoders

The dual function encoders act as push-button and rotary controls.

When an encoder is pressed, it may be used to change modes of operation

or to change what appears in the display above the channel strips. When an

encoder is rotated, depending on its assigned function, it can be used to adjust

a channel’s pan, send level, or plug-in parameters.

5. Encoder LED

The 11-LED’s surrounding the encoder light up to indicate the relative position of

the rotation without having to look at your computer.

6. Control buttons

Recording channel control buttons section

7. DAW Selector section

QconEX G2 has built-in Mackie Control, LogicPro protocols & HUI for different

DAW’s such as CubaseTM, SamplitudeTM, Ableton LiveTM, Logic ProTM and

Pro ToolsTM .By selecting the correct Mackie control (HUI/LogicPro) protocol,

QconEX G2 will automatically map the major functions and work seamlessly with

that DAW.



<< / >> buttons - These arrow buttons are used to scroll through the mode

list. The name of the mode will display on the LCD.

DAW button - Press to enter the mode selection.



To change your QconEX G2 Control mode, turn the power switch off and on to

enter the Control selection mode. Select your desired mode from the list with the

“<<” / “>>” buttons.

(Note: You have to select the “Unit Number” for QconEX G2 before you

select the DAW.)



REC buttons - Activate and deactivate the recording state of the

associated channel. The switch will light red when the channel is armed.

SOLO buttons - Activate and deactivate the solo state of the associated

channel. The switch will light green when the channel solo state is on and

other channels will be muted. You can solo multiple channels by pressing

SOLO buttons on additional channels.

MUTE buttons - Activate and deactivate the mute state of the associated

channel. The switch will light blue when the channel is muted.

SEL buttons - The SEL buttons activate the associated channels in the

DAW software in order to perform a specic operation (for example, when

adjusting EQ with the ASSIGNABLE ENCODERS, the SEL switch will be

used to choose the channel you want to adjust). The switch will light red

when the channel is selected.

Tips: The DAW button cannot be activated if DAW software is running.



Tips: QconEX G2 will memorize your last selected DAW mode and re-enter

the same mode a few seconds after it has been switched on. (i.e. DAW

mode selection is not needed if the last mode is being used.)



Rear Panel Layout

1. User A / User B 1/4” TRS connectors

These 1/4” TRS connectors are able to connect to foot pedals (SPD-01) to

activate your selected functions. To set their parameters, select USER A and

USER B parameters in Mackie control mode.

2. USB port

Connect your QconEX G2 to your Mac/PC via this USB port.

3. 12V/5A power adapter

Connect the provided power adapter here.

(Note: QconEX G2 is not able to work without the provided power adapter

connected. The USB bus power is not able to provide sufcient power supply for

QconEX G2.)

Bottom Panel Layout

1. LCD contrast adjustment

Rotate the adjustment knob with the provided screwdriver to adjust the contrast of the

LCD. Rotate anticlockwise to reduce the contrast and clockwise will increase.

Getting Started (Connected with QconEX G2 (1 - 3units))

Connecting Your QconPro G2 Controller

1. Connect the QconPro G2 to your Mac/PC via the USB port

Choose a USB port on your Mac/PC and insert the wide (at) end of the USB

cable. Connect the cable’s other end to the QconPro G2. Your Mac/PC should

automatically “detect” the new hardware and notify you that it is ready to use.



(Tips: We recommended that you use ICON’s OneHub USB hub, which allows

you to connect up to 3 units of QconEX G2, if you are not connecting QconEX

G2 directly to your computer’s USB port.)

Esc

F1 F2 F3 F4

F7 F8 F9 F10 F11 F12

Prtsc

sysrq

pause

Break

Lns

Del

Home

Pgup

PgDN

End

！

··

23456778 90

）

*—

#￥%

QWERTYUIOP{}|

ASDFGHJKL:

;

ZXCVBNM<>?

Tab

CapsLook

Shift

Ctrl Alt AltGr Ctrl

Backspace

[

]

Enter

Shift

intel

QconPro G2QconEX G2 (3)QconEX G2 (2)QconEX G2 (1)

QconPro G2 QconEX G2 (3)QconEX G2 (2)QconEX G2 (1)

Inhaltsverzeichnis

Andere ICON Extender Handbücher

ICON

ICON PLATFORM B+ Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung