IconBiT PSS CUBUS Bedienungsanleitung

iconBIT PSS CUBUS
User Manual

iconBIT PSS CUBUS User Manual
2
Disclaimer
All the information, design and specifications contained in this manual were
correct at the time of publication. However, as the product is under
continuously upgrading, the final device may have a slightly difference in
appearance or modified functionality than presented in this manual.
Safety precautions
•Never subject speaker to extremes of light, temperature, moisture or
vibration.
•Do not use or store speaker in a location subject:
A. Extreme high temperature, such as in a sun-heated car
B. Direct sunlight
C. High humidity or places with corrosive substances
D. Sub-zero condition, especially during winter.
•Clean only with a dry cloth.
•Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way.
The symbol means that the unit complies with European safety
and electrical interference directives.

iconBIT PSS CUBUS User Manual
3
Parts and Control
Top view
Front view
Left side view
Right side view
Bottom view Back view

iconBIT PSS CUBUS User Manual
4
1. ( ) Play/Pause button – press to play/pause/confirm.
2,3. ( ,) Previous/Next button – during playback, press to go to
previous/next song, press and hold to fast rewind/forward.
4,5. (<, >) Upwards/Downwards button – press to adjust volume level
or adjust the date/hour/minute.
6. Screen.
7-9. Alarm1/Alarm2 button –press to turn on/off Alarm1 or Alarm2.
10. FM Radio.
11. Power – slide the power button to “ON”/”OFF” to turn on/off the speaker.
12. USB port – for connecting to music source device.
13. SD card slot.
14. Reset button.
15. Line-in port.
16. DC-in jack –connect to AC adapter for charging.
Turning On/Off the Device
•Slide the Power button to “ON”/”OFF” to turn on/off the device.
•If the unit is not responding or can’t be turned on, press the Reset
button to reset, then slide the Power button to “ON” to turn on the
unit.

iconBIT PSS CUBUS User Manual
5
Charging
When battery power is low, charge the device using AC adapter with output
5V, 1.5A.
Inserting a Memory Card
•Insert the SD card correctly with its label facing down until it clicks into
the place.
•To remove SD card, push the card once again until it clicks.
•The device supports SD card up to 16GB.
Playing the Music From Music Source
1. Plug the Connector cable to the music source, e.g. PCs/laptops, MP3
players or radios.
2. Turn on the unit.
3. Select Music mode, rotate the unit until the “ ” appears on the
display screen.
4. Start playing the selected music or radio from the music source.
5. Press the </> button on the left side to adjust the volume.

iconBIT PSS CUBUS User Manual
6
Using the Speaker as a Player
To use the speaker as a player, please insert a memory card or USB device,
then follow the below steps to play music.
•Insert a memory card/USB device including song files.
•Turn on the unit.
•Select Music mode, rotate the unit until the “ ”, “ ” or “ ”
appear on the display screen.
•Press to start playing music.
•Press again to pause the playback.
•Press / to turn to previous or next song. Press and hold to fast
rewind or fast forward.
•Press the </> button on the left side to adjust the volume.
•Press the button on the right side to set loop mode or shuffle mode.

iconBIT PSS CUBUS User Manual
7
Radio
1. Select Radio mode, rotate the unit until the “ ” appears on the
display screen.
2. Press and hold “” to auto search the stations. The unit will
automatically store the stations searched (up to 40 stations).
3. Press < /> on the top side to manually adjust the frequency from
87.5MHz to 108MHz with step size 0.1MHz, to store the searched
station, press and hold the on the left side.
4. Press and hold < /> to auto search the stations upwards/
downwards.
5. Press “” to play the stations. Each time you press “ ”, it will
turn to next station stored in the unit.
6. Press < / > on the right side to adjust the volume level.

iconBIT PSS CUBUS User Manual
8
Setting the Clock
1. Select the Clock Setting mode, rotate the unit until the appears on
the display screen.
2. Press the button on the right side until the hour digital blinks, then
start setting the clock.
3. Press the < / > button on the top side to adjust the hour.
4. Press the / on the right side to select the year, month, day,
hour, minute, and the selected item will blink.
5. Press the < / > button on the top side to change the setting for the
selected item.
6. Press to confirm the setting.
The clock setting is based on 24-hrs time format.
Setting the Alarm
1. Select Alarm mode, rotate the unit until the appears on the display
screen.
2. Press Alarm1 or Alarm2 button to select Alarm 1 or Alarm 2 setting.
The / will appear on the display screen.

iconBIT PSS CUBUS User Manual
9
3. Press and hold the until the hour digital blinks, then start setting
the alarm.
4. Press the or on the left side to select the hour and minute, the
selected item will blink.
5. Press the < / > button on the right side to adjust the desired hours
and minutes.
6. Press the button on the top side to confirm the alarm setting. The
alarm symbol will appear on screen.
•Press the Alarm1/Alarm2 button to activate/ deactivate the alarm.
When the alarm is activated, the / will appear on the display
screen.
•To set its ring tone, choose either of the following method:
1. In Music mode, press the Alarm1 button on the right side to set
the last played song as its ring tone.
2. In Radio mode, press the Alarm2 button on the left side to set
the last played station as its ring tone.
•Press any button to turn off the ringing alarm.

iconBIT PSS CUBUS User Manual
10
Technical Specifications
Driver Unit
Dimension: 40mm
Cone Material: Paper, Aluminum
Magnet Material: Ferrite
Impedence: 4 Ohm
Power Rating: 3W
Processor
Model No: Action ATS2503
Audio
Output Channel: Stereo 2.0
Output Power (Max): 3W x 2
Total Continuous Power (RMS) @ 10% THD @ 60~20KHz: 2W x 2
Frequency response: 80Hz ~ 20KHz
Sensitivity: 600mV/THD10%
Distortion: 0.1%/0.5W
Signal to noise ratio @ 1KHz Input: >85Db
Functional Description
Functional: SD&USB Host/Line in/FM/Alarm/Time
Connectivity
Audio: 3.5 mm audio jack
Power: DC Jack
Inhaltsverzeichnis
Sprachen:
Andere IconBiT Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken

Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung

Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer
Pioneer XW-HTD630 Bedienungsanleitung

Onn
Onn BWA16AA002 Bedienungsanleitung

HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung











