ICP DAS USA LX-8131 Bedienungsanleitung
LinPAC + I-8211W
User Manual
(GPS/GLONASS Time Synchronization)
V1.0.1 Apr 2022
LX-8131/LX-8331/LX-8731
LP-8121/LP-8421/LP-8821
LinPAC + I-8211W User Manual version 1.0.1 Page: 2
Warranty
All products manufactured by ICP DAS are under warranty regarding defective
materials for a period of one year, beginning from the date of delivery to the
original purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from the use of this
product. ICP DAS reserves the right to change this manual at any time without
notice. The information furnished by ICP DAS is believed to be accurate and
reliable. However, no responsibility is assumed by ICP DAS for its use, not for any
infringements of patents or other rights of third parties resulting from its use.
Copyright
Copyright @ 2022 by ICP DAS Co., Ltd. All rights are reserved.
Trademark
The names used for identification only may be registered trademarks of their
respective companies.
Contact US
If you have any problem, please feel free to contact us.
You can count on us for quick response.
LinPAC + I-8211W User Manual version 1.0.1 Page: 3
Contents
Contents...............................................................................................................................................3
1. Introduction .....................................................................................................................................4
1.1. Features ................................................................................................................................5
1.2. Specifications ........................................................................................................................6
1.3. LED indicators .......................................................................................................................7
2. LinPAC + I-8211W Getting Started...................................................................................................8
2.1. I-8211W(GPS Time Synchronization)....................................................................................9
3. Internet Service..............................................................................................................................11
Appendix............................................................................................................................................12
A. Troubleshooting ....................................................................................................................12
B. I-8211W’s Device Name in LinPAC ........................................................................................14
C. Revision History .....................................................................................................................15
LinPAC + I-8211W User Manual version 1.0.1 Page: 4
1. Introduction
I-8211W-G is a GPS, GLONASS receiver module designed to use GPS, GLONASS
satellite time for automatic and precise time synchronization. The I-8211W-G can be
plugged into any slot of the LinPAC, the LinPAC will automatically launch the application
and acquire GPS, GLONASS time to reduce RTC drift to 1ms. The I-8211W is preset to
receive GPS signals, you can modify the LinPAC settings to receive GLONASS signals.
PS: LinPAC with NTPD package: LP-8x21, LX-8x31
LinPAC + I-8211W User Manual version 1.0.1 Page: 5
1.1. Features
●Time synchronization, error under 1 millisecond
●Support GPS, GLONASS
●Capable of SBAS (WAAS, EGNOS, MSAS)
●Plug and Play in LinPAC (LX-8x31, LP-8x21) series.
-LX-8131/8331/8731
-LP-8121/8421/8821
LinPAC + I-8211W User Manual version 1.0.1 Page: 6
1.2. Specifications
LinPAC + I-8211W User Manual version 1.0.1 Page: 7
1.3. LED indicators
LED
Status
Description
PWR
(Red)
ON
The module’s power is working correctly.
OFF
The module’s power turned off (or error).
GPS/
GLONASS
(Green)
ON
The module is searching GPS/GNSS.
OFF
The module’s GPS/GNSS error.
Blanking
(1 sec)
The module is working correctly and receiving GPS/GNSS data.
LinPAC + I-8211W User Manual version 1.0.1 Page: 8
2. LinPAC + I-8211W Getting Started
This chapter provides a guided tour of the I-8211W installation for user working with the LinPAC
for the first time.
Before starting any task, please check the package contents. If any of the following package
contents are missing or damaged, contact your dealer, distributor.
I-8211W Package Checklist
I-8211W and a 5m antenna (ANT-115-03)
LinPAC + I-8211W User Manual version 1.0.1 Page: 9
2.1. I-8211W (GPS/GLONASS Time Sync Module)
Please refer to below steps to insert a I-8211W module into any expansion slot of LinPAC and
synchronize GPS/GLONASS time automatically.
LinPAC (LX-8x31and LP-8x21) Series
Step 1: Align circuit card with slot and press firmly to seat module into connector
Tips & Warnings
It is recommended that the power to the LinPAC is switched off when wring the
I/O module which are plugging in the LinPAC slots.
LinPAC + I-8211W User Manual version 1.0.1 Page: 10
Step 2: Pull top and bottom locking tabs toward module face. Click indicates lock is engaged.
Step 3: Power on LinPAC
After boot the Linux OS, the LinPAC will automatically launch the application and get the
GPS/GLONASS time to minimize the RTC drift to 1 millisecond. Using “ntpq –p” command to check
the time’s error (the time error < 1ms). Please refer to below diagram:
Tips & Warnings
Sometime the ntpd daemon need to spend 10~20 minutes to minimize the time
error, so the command “ntpq –p” can’t show the symbol ‘o’ or time error less
than 1ms immediately.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere ICP DAS USA Controller Handbücher
ICP DAS USA
ICP DAS USA WISE-580 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA 7188XA Gebrauchsanweisung
ICP DAS USA
ICP DAS USA LinPAC-22 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA CAN-8224 Einrichtungshandbuch
ICP DAS USA
ICP DAS USA I-7188XBD-CAN Bedienungsanleitung
ICP DAS USA
ICP DAS USA LinPAC-5000 Bedienungsanleitung
ICP DAS USA
ICP DAS USA WinCon 8000 Gebrauchsanweisung
ICP DAS USA
ICP DAS USA TPD-433-H Bedienungsanleitung
ICP DAS USA
ICP DAS USA NMC-9181 Installationsanleitung
ICP DAS USA
ICP DAS USA WISE-52 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA 7188XA Bedienungsanleitung
ICP DAS USA
ICP DAS USA I-7188XG Bedienungsanleitung
ICP DAS USA
ICP DAS USA TPD-283U-M1 Bedienungsanleitung
ICP DAS USA
ICP DAS USA Compact Embedded Controller LinCon-8000 Gebrauchsanweisung
ICP DAS USA
ICP DAS USA WP-8000-CE7 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA uPAC-7186EG Bedienungsanleitung
ICP DAS USA
ICP DAS USA i8094A Bedienungsanleitung
ICP DAS USA
ICP DAS USA I-7188XA Bedienungsanleitung
ICP DAS USA
ICP DAS USA mPAC-7186EXD-CAN Bedienungsanleitung
ICP DAS USA
ICP DAS USA Compact Embedded Controller LinPAC-8x41 Gebrauchsanweisung
