ICP Electronics ROCKY-772EV Bedienungsanleitung

ROCKY – 772EV

DuronTM & Athlon(XP)TM with Dual LAN

Integrated S3 savage4 AGP4X VGA SBC

Ver 1.1

Manual first edition JUNE 26,2001

The information in this document is subject to change without prior notice in

order to improve reliability, design and function and does not represent a

commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental,

or consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights

are reserved. No part of this manual may be reproduced by any mechanical,

electronic, or other means in any form without prior written permission of the

manufacturer.

Trademarks

ROCKY-772EV is registered trademarks of ICP Electronics Inc.; IBM PC is a

registered trademark of International Business Machines Corporation. Intel is a

registered trademark of Intel Corporation. AWARD is registered trademarks of

AWARD Software ,Inc.. Other product names mentioned herein are used for

identification purposes only and may be trademarks and/or registered trademarks

of their respective companies.

Support

Any questions regarding the content of this manual or related issues can be e-

mailed to us directly at: SUPPORT@IEI.COM.TW

Contents

1. Introduction .....................................................................4

1.1 Specifications ......................................................................................5

1.2 What You Have...................................................................................7

2. Installation.......................................................................8

2.1 ROCKY – 772EV's Layout................................................................9

2.2 Unpacking Precautions .....................................................................10

2.3 Setting the CPU of ROCKY-772EV ...............................................11

2.4 Watch-Dog Timer .............................................................................11

2.5 DiskOnChip™ Flash Disk ..............................................................11

2.6 Clear CMOS Setup ...........................................................................12

2.7 Onboard LAN1/LAN2 Setting.........................................................12

2.8 Onboard Keyboard/Mouse Source

Setting……………………….12

3. Connection ....................................................................13

3.1 Floppy Disk Drive Connector ..........................................................14

3.2 PCI E-IDE Disk Drive Connector ...................................................15

3.3 Parallel Port .......................................................................................16

3.4 Serial Ports ........................................................................................16

3.5 Keyboard & PS/2 Mouse Connector................................................17

3.6 External Switches and Indicators .....................................................18

3.7 USB Port Connector .........................................................................19

3.8 IrDA Infrared Interface Port .............................................................19

3.9 CPU & SYSTEM Fan Connector....................................................19

3.10 LAN RJ45 & STATE LED Connector ...........................................20

3.11 VGA Connector ................................................................................20

3.12 AUDIO Headphone & Input Connector .......................................20

3.13 ATX 20-PIN Power Connector .......................................................21

4. AWARD BIOS Setup .......................................... 22

4.1 Introduction........................................................................................22

4.2 Starting Setup....................................................................................22

4.3 Using Setup .......................................................................................23

4.4 Getting Help.......................................................................................24

4.5 Main Menu.........................................................................................25

4.6 Standard CMOS Setup ....................................................................28

4.7 Advanced BIOS Features Setup .....................................................32

4.8 Advanced Chipset Features Setup ..................................................36

4.9 Integrated Peripherals Setup............................................................39

4.10 Power Management Setup .............................................................43

4.11 PnP/PCI Configuration Setup ..........................................................48

4.12 PC Health Status Setup…………….................................................50

4.13 Frequency / Voltage Control Setup …………….. ...........................51

4.14 Defaults Menu Setup …………….. ..................................................52

4.15 Change Supervisor/User Password……………..............................53

4.16 Exit Selection …………….. ...............................................................54

5. Appendix A. Watch-Dog Timer ...................................55

Appendix B. I/O Address Map .....................................57

Appendix C. ATX Power Supply .................................59

Appendix D. How to used Wake Up Function.............61

Introduction

Welcome to the ROCKY-772EV DuronTM & Athlon(XP)TM Single

Board Computer. The ROCKY-772EV board is an ISA/PCI form

factor board, which comes equipped with high performance

Athlon(XP)TM Processor and advanced high performance multi-

mode I/O, designed for the system manufacturers, integrators,

or VARs that want to provide all the performance, reliability, and

quality at a reasonable price.

In addition, the ROCKY-772EV provides S3 Savage4 AGP4X

VGA on board. The VGA chip is 3D graphics chipset, which

provides up to 1920x1440x16-color resolution. The VGA on

board has 8 to 32MB frame buffer sharing with system memory.

This board has a built-in DiskOnChip™(DOC) Flash Disk Socket

for embedded applications. The DOC Flash Disk is 100%

software compatible with hard disks. Users can use any DOS

command without any extra software utility. The DOC currently

is available from 2MB to 144MB.

An advanced high performance super AT I/O chip – VIA

VT82C686B is used in the ROCKY-772EV board. Both on-chip

UARTs are compatible with the NS16C550. The parallel port

and IDE interface are compatible with IBM PC/AT architecture.

The ROCKY-772EV uses dual Intel 82559 /Realtek RTL8100

Fast Ethernet Multifunction PCI Controller as LAN controllers.

They are fully integrated 10BASE-T/100BASE-TX LAN solution

with high performance networking functions and low power

features.

The ROCKY-772EV uses the advanced VIA KM/KL133A

Chipset which is 100% software compatible chipset with PCI 2.1

standard.

1.1 Specifications

CPU(PGA462) AMD DuronTM and Athlon(XP)TM Processor,

supports 200/266 MHz FSB

Bus interface PCI/ISA bus, PICMG compliant

Bus speed ISA : 8MHz, PCI: 33MHz

DMA channels 7

Interrupt levels

Chipset VIA KM/KL133A

Real-time

clock/calendar

VT82C686B

RAM memory

Three 168-pin DIMM sockets support SDRAM

and VCM RAM module. The max. Memory is up

to 1.5GB.

ATA/100

IDE interface

Up to four PCI Enhanced IDE hard drives. The

ATA/100 IDE can handle data transfer up to

100MB/s. Compatible with existing ATA-2 IDE

specifications its best advantage, so there is no

need to do any changes for users’ current

accessories.

Floppy disk

drive interface

Supports up to two floppy disk drives,

5.25”(360KB and 1.2MB) and/or 3.5” (720KB,

1.44MB, and 2.88MB)

Serial ports

Two RS-232 ports with 16C550 UART (or

compatible) with 16-byte FIFO buffer. Support up

to 115.2Kbps. Ports can be individually

configured to COM1, COM2 or disabled.

Bi-directional Configurable to LPT1, LPT2, LPT3 or disabled.

S t EPP/ECP/SPP

parallel port Supports EPP/ECP/SPP

Hardware

monitor

Built-in to monitor power supply voltage and fan

speed status

IrDA port Supports Serial Infrared(SIR) and Amplitude Shift

Keyed IR(ASKIR) interface

USB port Supports 4 USB ports for future expansion

Watch-dog

timer

Software Programmable Reset or NMI is

generated when CPU does not periodically

trigger the timer. Your can use I/O Port hex

043(843) & 443 to control the watchdog and

generate a system reset.

VGA controller

Integrated S3 Savage4 AGP4X 3D graphics Core

plus Advanced Memory Controller.

Screen Resolution: up to 1920x1440x16.

Ethernet

Dual Intel 82559 /Realtek 8100 Fast Ethernet

controllers, IEEE 802.3u Auto-Negotiation

support for 10BASE-T/100BASE-TX standard.

Two RJ45 connectors are located on the mounting

bracket for easy connection.

Flash disk

socket

The DiskOnChip™ compatible 32-pin dip socket

is provided for Flash Disk (DiskOnChip™)

application which will let users to use the Flash

Disk with DOS command, without any extra

software utility.

Keyboard and

PS/2 mouse

connector

A 6-pin mini DIN connector is located on the

mounting bracket for easy connection to a

keyboard or PS/2 mouse. For alternative

application, a keyboard and a PS/2 mouse pin

header connector are also available on board.

Compactflash It can be used with a passive adapter (True IDE

Mode ) in a Type I/II Socket.

Power

consumption

( AthlonTM (K7) 1.4GHz,512MB PC133 SDRAM)

+5V @ 12.5A ,+12V @ 168mA ,-12V @40mA.

Recommended : 300-watt power supply or higher

Operating

temperature

0°~ 50°C

( *CPU needs Cooler & silicone heatsink paste* )

WARNING ! :Never run the processor without the heatsink(Cooler)

properly and firmly attached.

1.2 What You Have

In addition to this User's Manual, the ROCKY-772EV package

includes the following items:

•One ROCKY-772EV Single Board Computer

•One RS-232 x2 and Printer Cable with bracket

•One FDD cable

•One AUDIO cable.

•One ATA/100 IDE cables

•One 6-pin Mini-Din converts to two 6-pin mini-Din cables for

keyboard and mouse connection.

If any of these items are missing or damaged, contact the

dealer from whom you purchased this product. Save the

shipping materials and carton in case you want to ship or store

the product in the future.

Installation

This chapter describes how to install the ROCKY-772EV. At first,

the layout of ROCKY-772EV is shown, and the unpacking

information that you should be careful is described. The

jumpers and switches setting for the ROCKY-772EV's

configuration, such as CPU clock setting, and watchdog timer,

are also included.

2.1 ROCKY – 772EV's Layout

2.2 Unpacking Precautions

Some components on ROCKY-772EV SBC are very sensitive to

static electric charges and can be damaged by a sudden rush

of power. To protect it from unintended damage, be sure to

follow these precautions:

 Ground yourself to remove any static charge before touching

your ROCKY-772EV SBC. You can do it by using a grounded

wrist strap at all times or by frequently touching any conducting

materials that is connected to the ground.

 Handle your ROCKY-772EV SBC by its edges. Don’t touch IC

chips, leads or circuitry if not necessary.

 Do not plug any connector or jumper while the power is on.

Table of Jumpers

LABEL FUNCTION

JP1 &

JP7

CPU FSB 200/266MHz Setting

JP2 Onboard LAN2 enable/disable.

JP3 CompactFlash Master(close)/Slave(open) Setting.

JP4 Onboard LAN1 enable/disable.

JP5 Watch-Dog Active Type Setting

JP6 DiskOnChip Memory Address Setting

JKB1 Keyboard/Mouse power source Setting

JBAT1 CMOS state setting

Note: All shaded rows in tables of this manual are the default settings

for the ROCKY-772EV.

2.3 Setting the CPU of ROCKY-772EV

•JP1 & JP7 : CPU FSB 200/266MHz Setting

JP1 JP7

CPU FSB 1-2 3-4 5-6 7-8 1-2

200 MHz CLOSE CLOSE OPEN CLOSE CLOSE

266 MHz OPEN OPEN OPEN OPEN OPEN

When you change CPU with FSB 266MHz to that with 200MHz

be sure to clear CMOS before first power ON.

2.4 Watch-Dog Timer (JP5)

Reading I/O port 443H enables the Watch-Dog Timer. It should

be triggered before the time-out period ends, otherwise it will

assume the program operation is abnormal and will issue a

reset signal to start again, or activate NMI to CPU. The Watch-

Dog Timer is disable by reading I/O port 043H or 843H. Refer to

Appendix A for detailed information on Watch-Dog Timer.

•JP5 : Watch-Dog Active Type Setting

JP5 DESCRIPTION

1-2 ACTIVATE NMI TO CPU WHEN WDT TIME-

OUT

2-3 RESET WHEN WDT TIME-OUT

OPEN DISABLE WDT

2.5 DiskOnChip™ Flash Disk

The DiskOnChip™ Flash Disk Chip(DOC) is produced by M-

Systems. Because the DOC is 100% software compatible to

hard disk and DOS, users don‘t need any extra software utility. It

is just “plug and play” easy and reliable. At present the DOC is

available from 2MB to 144MB. The DiskOnChip only shares

8KB memory address.

•JP6 : DiskOnChip Memory Address Setting

Address 1-2 3-4 5-6

CE000 – CFFFF OFF ON ON

D6000 – D7FFF ON OFF ON

DE000 – DFFFF OFF OFF ON

2.6 Clear CMOS Setup

If want to clear the CMOS Setup (for example forgot the

password you should clear the setup and then set the password

again.), you should close the JBAT1 (1-2) about 3 seconds,

then open it again. Set back to normal operation mode, open

JP1.•JBAT1 : Clear CMOS Setup (Reserve Function)

JBAT1 DESCRIPTION

1-2 Normal Operation

2-3 Clear CMOS Setup

2.7 Onboard LAN1(JP4) / LAN2(JP2) Setting

The onboard LAN controllers can be disabled if you don’t want to use

then. All the hardware resource will be released. After they are disabled.

JP2/JP4 DESCRIPTION

CLOSE Enable

OPEN Disable

2.8 Onboard Keyboard/Mouse source Setting

JKB1 DESCRIPTION

1-2 Vcc (+5V)

2-3 5VSB

Connection

This chapter describes how to connect peripherals, switches

and indicators to the ROCKY- 772EV board.

Table of Connectors

LABEL FUNCTION

FAN1,FAN2 CPU /SYSTEM Fan Connectors

CN1 ATX 20-PIN Power Connector

CN2 IrDA connector

CN3 ATX BUTTON (Power ON) Switch

CN5 Parallel Port Connector

CN6 FDC Connector

CN7 Secondary IDE Connector

CN8 Primary IDE Connector

CN9,CN10 USB Connectors

CN11,CN14 Serial Port 10-pin Connectors

CN12 External Switches and Indicators

CN13 Backplane to Mainboard Connectors

CN16,CN17 LAN State LED Connectors

CN18 AUDIO MIC-IN

CN19 AUDIO LINE-IN

CN20 AUDIO CD-IN

CN21 VGA 15-pin Female Connector

CN22,CN24 LAN RJ45 Connectors

CN25 External 5-pin Header Keyboard Connector

CN26 PS/2 MOUSE & KEYBOARD Connector

3.1 Floppy Disk Drive Connector

The ROCKY-772EV board is equipped with a 34-pin daisy-chain

drive connector cable.

•CN6 : FDC Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GROUND 2 REDUCE WRITE

3 GROUND 4 N/C

5 GROUND 6 N/C

7 GROUND 8 INDEX#

9 GROUND 10 MOTOR ENABLE A#

11 GROUND 12 DRIVE SELECT B#

13 GROUND 14 DRIVE SELECT A#

15 GROUND 16 MOTOR ENABLE B#

17 GROUND 18 DIRECTION#

19 GROUND 20 STEP#

21 GROUND 22 WRITE DATA#

23 GROUND 24 WRITE GATE#

25 GROUND 26 TRACK 0#

27 GROUND 28 WRITE PROTECT#

29 GROUND 30 READ DATA#

31 GROUND 32 SIDE 1 SELECT#

33 GROUND 34 DISK CHANGE#

3.2 PCI E-IDE Disk Drive Connector

You can attach four IDE( Integrated Device Electronics) hard

disk drives on two channels. These connectors support Ultra-

DMA100 IDE devices. Non-DMA100 devices are suggested to

be connecting to the secondary IDE connector.

CN8 (IDE 1) : Primary IDE Connector

CN7 (IDE 2) : Secondary IDE Connector

•CN8/CN7 : IDE Interface Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 RESET# 2 GROUND

3 DATA 7 4 DATA 8

5 DATA 6 6 DATA 9

7 DATA 5 8 DATA 10

9 DATA 4 10 DATA 11

11 DATA 3 12 DATA 12

13 DATA 2 14 DATA 13

15 DATA 1 16 DATA 14

17 DATA 0 18 DATA 15

19 GROUND 20 N/C

21 N/C 22 GROUND

23 IOW# 24 GROUND

25 IOR# 26 GROUND

27 N/C 28 BALE – DEFAULT

29 N/C 30 GROUND – DEFAULT

31 INTERRUPT 32 IOCS16#-DEFAULT

33 SA1 34 N/C

35 SA0 36 SA2

37 HDC CS0# 38 HDC CS1#

39 HDD ACTIVE# 40 GROUND

3.3 Parallel Port

This port is usually connected to a printer. The ROCKY-772EV

includes an on-board parallel port, accessed through a 26-pin

flat-cable connector.

•CN5 : Parallel Port Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 STROBE# 2 DATA 0

3 DATA 1 4 DATA 2

5 DATA 3 6 DATA 4

7 DATA 5 8 DATA 6

9 DATA 7 10 ACKNOWLEDGE

11 BUSY 12 PAPER EMPTY

13 PRINTER SELECT 14 AUTO FORM FEED #

15 ERROR# 16 INITIALIZE

17 PRINTER SELECT LN# 18 GROUND

19 GROUND 20 GROUND

21 GROUND 22 GROUND

23 GROUND 24 GROUND

25 GROUND

3.4 Serial Ports

The ROCKY-772EV offers two high speeds NS16C550

compatible UART.

CN14 (COM1) : 10-pin header on board

CN11 (COM2) : 10-pin header on board

Serial port connections

Connector Ports Address Interrupt

CN14 COM1 3F8 IRQ4

CN11 COM2 2F8 IRQ3

•Serial Port 10-pin Connector

PIN NO. DESCRIPTION

1 DATA CARRIER DETECT (DCD)

2 RECEIVE DATA (RXD)

3 TRANSMIT DATA (TXD)

4 DATA TERMINAL READY (DTR)

5 GROUND (GND)

6 DATA SET READY (DSR)

7 REQUEST TO SEND (RTS)

8 CLEAR TO SEND (CTS)

9 RING INDICATOR (RI)

10 GROUND (GND)

3.5 Keyboard & PS/2 Mouse Connector

A 6-pin mini DIN connector (CN26) is located on the mounting

bracket for easy connection to a keyboard or a PS/2 mouse.

The card comes with a cable to convert from the 6-pin mini-DIN

connector to two 6-pin mini-DIN connectors for keyboard and

mouse connection.

•CN26 : 6-pin Mini-DIN Keyboard Connector

PIN NO. DESCRIPTION

1 KEYBOARD DATA

2 MOUSE DATA

3 GROUND

4 +5V

5 KEYBOARD CLOCK

6 MOUSE CLOCK

For alternative application, a keyboard and a PS/2 mouse pin

header connector are also available on board, located on CN25

respectively.

•CN25 : 5-pin Header Keyboard Connector

PIN NO. DESCRIPTION

1 KEYBOARD CLOCK

2 KEYBOARD DATA

3 N/C

4 GROUND

5 +5V

Inhaltsverzeichnis

Andere ICP Electronics Hauptplatine Handbücher

ICP Electronics

ICP Electronics ROCKY-P258BX Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY-3705EV-R2 Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY-3732EVS Bedienungsanleitung

ICP Electronics

ICP Electronics iEi ROCKY-4782E2V Bedienungsanleitung

ICP Electronics

ICP Electronics IEI ROCKY- 4784EVG Series Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY - 058HV Bedienungsanleitung

ICP Electronics

ICP Electronics JUKI-6752 Bedienungsanleitung

ICP Electronics

ICP Electronics WAFER-7850 Bedienungsanleitung

ICP Electronics

ICP Electronics NOVA-7896 Bedienungsanleitung

ICP Electronics

ICP Electronics WAFER-5825 Bedienungsanleitung

ICP Electronics

ICP Electronics NOVA-7895 Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY-3786EV Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY-3742EVFG Bedienungsanleitung

ICP Electronics

ICP Electronics PSB Form Factor Board SAGP-845EV Bedienungsanleitung

ICP Electronics

ICP Electronics WAFER-5823 Bedienungsanleitung

ICP Electronics

ICP Electronics JUKI- 745E Bedienungsanleitung

ICP Electronics

ICP Electronics ROCKY-P248SV Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung