ICPDAS DL-100-E Bedienungsanleitung

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 1 -

DL-100-E/DL-101-E

DL-110-E/DL-120-E

Illumination/Temperature/Humidity/Dew Point

Data Logger User Manual

Version: 1.1.3

Date: Dec 2020

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 2 -

Warranty

All products manufactured by ICP DAS are warranted against defective materials for a

period of one year from the date of delivery to the original purchaser.

Warning

ICP DAS assumes no liability for damages consequent to the use of this product.

ICP DAS reserves the right to change this manual at any time without notice. The

information furnished by ICP DAS is believed to be accurate and reliable. However, no

responsibility is assumed by ICP DAS for its use, nor for any infringements of patents or

other rights of third parties resulting from its use.

If you have any questions, feel free to contact us via email at:

[email protected]

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 3 -

Contents

1. Introduction................................................................................................................4

2. Hardware ...................................................................................................................7

2.1 Specifications....................................................................................................7

2.2 Appearance.......................................................................................................9

2.3 Dimensions (unit: mm)....................................................................................17

2.4 Cabling for Power and Network ......................................................................18

3. Configuration via Web Browser................................................................................20

3.1 Search the DL-100-E series module logger....................................................20

3.2 Logging into the DL-100-E..............................................................................21

3.3 Home..............................................................................................................22

3.4 Network...........................................................................................................23

3.5 MQTT..............................................................................................................25

3.6 I/O Settings.....................................................................................................28

3.7 Filter IP ...........................................................................................................32

3.8 Monitor............................................................................................................33

3.9 Change Password...........................................................................................33

3.10 Logout...........................................................................................................34

4. Configuration via RS-485(DL-110-E / DL-120-E Only).............................................35

4.1. Building the RS-485 Connection....................................................................35

4.2. AI tab..............................................................................................................39

4.3 Logger Configuration ......................................................................................40

5. Monitoring via Mobile Devices .................................................................................41

6. Utility to Get/Manage Data Log................................................................................42

7. FAQ..........................................................................................................................53

Q1: How to set the Accessible IP?.......................................................................................53

Q2: How to delete the Accessible IP settings?.....................................................................53

Q3: How to clear the data logged in a DL-100-E module? .................................................54

Q4: How to download firmware into a DL-100-E module?................................................54

Appendix A: ModbusMasterToolPC..............................................................................58

Appendix B: Modbus Address Table.............................................................................62

B-1. DL-100-E Modbus Address Mappings (Base 1) ............................................62

B-2. DL-101-E Modbus Address Mappings (Base 1) ............................................65

B-3. DL-110-E ModbusAddress Mappings (Base 1).............................................69

B-4. DL-120-E Modbus Address Mappings (Base 1) ............................................73

Revision History...........................................................................................................77

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 4 -

1. Introduction

The DL-100-E series are Data Logger devices that can be used to record illumination,

temperature, humidity and dew point data, together with date and time stamp

information. Up to 600,000 downloadable records can be stored. Real-time data can be

accessed from the DL-100-E series device from anywhere and at any time using the

free Windows software, the iOS App or the Android App, as long as they are connected

to the same local network as the Data Logger. The DL-100-E series module supports

popular industrial protocols such as Modbus TCP, as well as the emerging

machine-to-machine (M2M)/IoT (Internet of Things) connectivity protocol –MQTT. The

DL-100-E Series Data Logger can be connected using a variety of communication

interfaces, including Ethernet and PoE, meaning that the device can be easily

integrated into existing HMI or SCADAsystems, and are easy to maintain in a

distributed control system.

Characteristics

Illumination Measurement Range: 0 to 100,000 Lux (DL-110-E / DL-120-E Only)

Temperature Measurement Ranges: -20 to +60°C and 0 to 100% RH

LCD Display Shows Temperature, Humidity, Relative Humidity, Date and

Time(DL-100-E / DL-101-E Only)

Able to store up to 600,000 records with date and time stamps

Free Software Utility, iOS APP and Android App Included

Supports the Modbus TCP and MQTT protocols

Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input

(DL-101-E / DL-110-E / DL-120-E Only)

Relay Output for Alarm Devices or IAQ Device Control (DL-101-E Only)

Supports Web Configuration and Firmware Update via Ethernet

IP 66 Protection Approval (DL-100-E / DL101-E Only)

IP 65 Protection Approval (DL-110-E / DL-120-E Only)

DIN-Rail or Wall Mounted

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 5 -

Features

Built-in Web Server

With the built-in Web server, users can easily log in to the DL-100-E series module

via a standard web browser to monitor the data and configure the settings without

install any software in the terminal.

Get Real-time Data Anywhere and Anytime

iAir App for iOS or Android Phones or Tablets is free and easy to install, it can

obtain the real-time data from DL-100-E series module over a Wi-Fi network

anytime and anywhere. The iAir App can link to the DL-100-E series modules by

specifying IP addresses or by searching all the modules connected to the same

Ethernet segment.

Data Logging Software

The DL-300 Utility can be used to configure a module and monitor real-time data,

as well as display the run chart, log alarm events, or group DL-100-E series module

so that the status of distribution groups can be viewed and managed. The utility

also allows the log data to be downloaded and exported to a .CSV file that can then

be imported into any industry-standard software or spreadsheet for analysis.

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 6 -

Easy integration with SCADA software

Modbus is one of the most popular protocols used in the industrial world.

Supporting traditional serial protocols of Ethernet protocols allow the DL-100-E

series module well-integrated into the HMI/SCADAsystems.

Easy Wiring

Support for Ethernet and Power over Ethernet (PoE) interfaces for users to choose

the appropriate one to meet the field requirements.

Power over Ethernet (PoE)

The DL-100-E series module features true IEEE802.3af-compliant (classification,

Class 1) PoE technology that allows both power and data to be carried over a

single Ethernet cable. PoE provides a unified power system, as well as backup

provisions for critical building functions, without any additional cables, outlets or

connections. It can reduce the power supply wiring and maintenance costs, and

improve system scalability.

Support for MQTT protocol

MQTT is a protocol designed for the efficient exchange of real-time data with sensor

and mobile devices. It runs over TCP/IP and is in widest use on the

"machine-to-machine" (M2M) and "Internet of Things" applications today

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 7 -

2. Hardware

2.1 Specifications

Model

DL-100-E

DL-101-E

DL-110-E

DL-120-E

Illumination Measurement

Range

0 to 100,000 Lux

Resolution

1 Lux

Accuracy

±5%

Response Time

1 second

Temperature Measurement

Range

-20 to +60°C (-31 to +176˚F)

Resolution

0.1°C

Accuracy

Typical: ± 0.4°C; refer to figure 2

Relative Humidity Measurement

Range

0 to 100% RH

Resolution

0.1% RH

Accuracy

Typical: ±3% RH @ 20 ~ 80% RH;

refer to figure 1

LCD LED Display

LCD Information

Displayed

Temperature (°C and °F),

Humidity (RH), Relative,

Humidity, Date and Time

PWR

System indicator (Green)

Link

Link/Act indicator (Green)

PoE

PoE indicator (Red)

Software

Built-in Web Server

Yes

Communication

RS-485 Port

Baud Rate = 1200 ~ 115200 bps

Ethernet Port

10/100 Base-TX with Auto MDI/MDI-X

Protocol,

Modbus TCP and MQTT

DCON, Modbus RTU Modbus TCP

and MQTT

Security

Password and IP Filter

Dual Watchdog

Yes, Module (2.3 seconds), Communication (Programmable)

System

Real Time Clock

Yes

Data Logger

Yes, 600,000 Records

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 8 -

PhotoMos Relay Output

Form A×2,

SPST 100 VDC

@ 1A

Interface

Ethernet/PoE

RS-485/Ethernet/PoE

Electrical

Powered via Terminal

Block

+12 to +48 VDC

Powered via PoE

IEEE 802.3af, Class 1 (require a PoE switch or injector)

Power

Consumption

PoE

0.7 W (Max.)

1.2 W (Max.)

Non-PoE

0.6 W (Max.)

1.1 W (Max.)

Mechanical

Dimensions (W x L x H)

92 mm x 131 mm x 56 mm

100 mm x 131 mm

x 67 mm

100 mm x 117

mm x 67 mm

Waterproof Level

IP66

IP65

Installation

DIN-Rail or Wall mounted

Environment

Operating Temperature

-20 to +60°C

Storage Temperature

-30 to +80°C

Humidity

5 to 95% RH, Non-condensing

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 9 -

2.2 Appearance

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020 - 10 -

LED Indicators

The three LED indicators from left to right are:

PWR: green for normal operation.

Link: green for the Ethernet linked.

PoE: red for powered via PoE

DIP Switch

PoE/non-PoE Ethernet port

The Ethernet port can be used to connect to either a PoE switch or a non-PoE switch.

Installing a waterproof attachment on an RJ45 connector.

The DL-100-E series module is equipped with an RJ-45 waterproof connector that

ensures the device is able to withstand potential contaminants in dusty environments.

IP67 RJ45 Plug (4SASO-0001)

The functions are printed on the top beside the

SW1 DIP switch. All the 4 dip switches need be

turned to the off position for normal operation.

1. Reserved

2. FW Update: ON for updating firmware.

3. Reserved

4. INIT: ON for using the factory default settings

for communication

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ICPDAS Datenlogger Handbücher

ICPDAS

ICPDAS DL-303 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung