Icron USB 2.0 RG2304 Bedienungsanleitung

USB 2.0 RG2304

4-Port USB 2.0 100m Cat 5e Extender System

User Guide

Thank you for purchasing the USB 2.0 RG2304

Please read this guide thoroughly.

This document applies to Part Numbers: 01-00448, 01-00449, 01-00450, 01-00451, 02-00028, and 02-00029.

FCC Radio Frequency Interference Statement Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received

including interference that may cause undesired operation.

CE Statement

We declare under our sole responsibility that the RG2304, to which this declaration relates, is in conformity

with European Standard EN 55022, EN 55024, EN 61000-3-2, and EN 61000-3-3.

IC Statement

This Class B digital apparatus complies with Canadian ICES-003.

Document #90-01106-A01

Contents

Introduction.............................................................................................................3

RG2304 Product Contents................................................................................................................ 3

Features .................................................................................................................................................. 3

The Local Extender ............................................................................................................................. 4

The Remote Extender ........................................................................................................................ 5

Installing the RG2304 System......................................................................................................... 6

Requirements ....................................................................................................................................... 6

Preparing Your Site ......................................................................................................................................................... 6

Installing the Local Extender ...................................................................................................................................... 7

Connecting the Local Extender to the Remote Extender ................................................................................ 7

Installing the Remote Extender ................................................................................................................................. 7

Checking the Installation ................................................................................................................. 8

Connecting a USB Device................................................................................................................. 9

Compatibility ........................................................................................................................................ 9

Troubleshooting ....................................................................................................10

Technical Glossary .................................................................................................11

Specications.........................................................................................................12

Introduction

This guide provides product information for the RG2304, installation instructions, troubleshooting

guidelines, and instructions for contacting Icron regarding technical support and warranty information.

The instructions in this guide assume a general knowledge of computer installation procedures, familiarity

with cabling requirements, and some understanding of USB devices.

NOTE: Notes provide additional information that could be useful.

CAUTION: Cautions provide important information about an operational requirement.

RG2304 Product Contents

Your RG2304 is packaged with:

• LocalExtender

• RemoteExtender

• USB2.0Cable

• RemoteExtenderACInternationalPowerAdapter

• Country Speciﬁc Power Cable

• Quick Start Guide

Features

The RG2304 incorporates ExtremeUSB® technology, enabling users to extend USB beyond the standard 5m

cable limit for USB 2.0 peripheral devices. The RG2304 has the following key features:

• 100mofextensionwhendirectlyconnectedoverCat5e

• SupportfornewUSB3.0hostcontrollersanddevices

USB 3.0 devices will perform at USB 2.0 speeds if extended through the RG2304.

The RG2304 extender system is composed of two individual units: the Local Extender and the Remote

Extender.

All references to Cat 5e cable in this document represent the minimum requirement. Category 6 or better and/or STP

cable may be substituted.

note

The Local Extender

The Local Extender connects to the computer using a standard USB 2.0 cable. Power for this extender is

provided by the the host computer.

Front View

Rear View

ITEM TYPE DESCRIPTION

1Power LED (Blue) LED turns on when power is supplied, off when no power is supplied by the

Host computer.

2 Link LED (Green)

Indicates a valid ExtremeUSB link is established between the Local and

Remote Extenders. The LED turns on when link between Local and Remote

Extender is established and off when there is no link between Local and

Remote Extenders.

3Host LED

(Green)

Indicates that the RG2304 system is properly enumerated on the host

computer.The LED blinks when the RG2304 is in a suspended state.

4Activity LED

(Amber)

Indicates data transmission is occurring between Local and Remote Extender.

LED blinks intermittently with or without a USB device connected.When the

Local and Remote Extenders are in suspend mode, the LED is off.

5 Pair Reserved for manufacturer use.

6 USB Host Port Used to connect the Local Extender unit to the host computer. Accepts Type

B connector into the Local Extender unit.

7 Link Port (RJ45) Accepts RJ45 connector for Cat 5e cabling (or better) to connect the Local

Extender unit to the Remote Extender unit.

8 Conﬁg Reserved for manufacturer use.

The Remote Extender

The Remote Extender provides USB Type A ports for standard USB devices. The Remote Extender allows you

to connect up to four USB devices directly. Additional devices may be connected by attaching USB hubs to

the Remote Extender unit.The Remote Extender is powered by an external AC adapter and can supply up to

500mA to each USB port.

Front View

Rear View

ITEM TYPE DESCRIPTION

1 USB Device Ports Accepts USB device(s) using Type A connectors.

2 Power LED (Blue) LED turns on when power is supplied, off when no power is supplied.

3 Link LED (Green) Indicates a valid ExtremeUSB link is established between the Local and

Remote Extenders. The LED turns on when link between Local and Remote

Extenders is established and off when there is no link between Local and

Remote Extenders.

4 Host LED (Green) Indicates that the RG2304 system is properly enumerated on the host

computer. The LED blinks when the RG2304 is in a suspended state.

5 Activity LED

(Amber)

Indicates data transmission is occurring between Local and Remote

Extenders. LED blinks intermittently with or without a USB device

connected.When the Local and Remote Extenders are in suspend mode,

the LED is off.

6 Power Port Connects to the AC power supply. Required at the Remote Extender for

proper operation.

7 Pair Reserved for manufacturer use.

8 Link Port (RJ45) Accepts RJ45 connector for Cat 5e cabling (or better) to connect the Local

Extender to the Remote Extender.

9 Conﬁg Reserved for manufacturer use.

Local Extender

Computer

Remote Extender

USB Devices

Up to 100m between extenders over Cat 5e (or better)

Installing the RG2304 System

Requirements

To complete the installation, you will also require the following items that are not included with the product:

• USBcompatiblecomputer(hostcomputer)withaUSBcompliantoperatingsystem

• USBcompatibledevice(s)

• Cat5eUnshieldedTwistedPair(UTP) cable with two RJ45 connectors (if using surface cabling),

OR, Cat 5e cabling with two information outlets and two Cat 5e patch cords with RJ45 connectors

(if using premise cabling)

Preparing Your Site

Before you can install the RG2304, you need to prepare your site:

1. Place the computer where desired and set it up.

2. Ensure that where you want to locate the USB device(s) is within 100m (cable-length) of the

computer. If not, adjust the location of the devices and/or computer accordingly.

3. If you are using surface cabling, install the Cat 5e cabling as desired and terminate it with the

appropriate RJ45 ends.

If you are using premise cabling, ensure Cat 5e cabling is installed between the two locations and if

necessary patched together. Cat 5e information outlets should be located near the computer and

the USB device(s), and the total length, including patch cords must be less than 100m.

Cable installation is important, particularly if high throughput applications are used. When installing, ensure the cable is

installed away from or isolated from potential sources of interference such as electrical wiring, ﬂourescent lighting, etc.

When terminating cables, ensure the matching RJ45 connector is used for the cable type. For example, if Cat 6 cable is

used, then Cat 6 compatible RJ45 connectors must be used. If this care is not taken, the beneﬁts of higher grade

cabling may not be realized.

note

Cat 5e Link Cable

USB cable

Installing the Local Extender

1. Place the Local Extender near the computer.

2. Connect the supplied USB cable between the LEX host port and a USB port on the host computer.

Connecting the Local Extender to the Remote Extender

With Surface Cabling

1. Connect the cable into the Link port of the Local Extender.

2. Connect the cable into the Link port of the Remote Extender.

With Premise Cabling

1. Connect a Cat 5e patch cable (not provided) into the information outlet near the host computer.

2. Connect the patch cable into the Link port of the Local Extender.

3. Connect a Cat 5e patch cable (not provided) into the information outlet near the USB devices.

4. Connect the patch cable into the Link port of the Remote Extender.

Installing the Remote Extender

1. Place the Remote Extender near the USB device(s).

2. Assemble the power adapter and country speciﬁc power cord together and connect them into a

suitable AC outlet.

3. Connect the power adapter to the Remote Extender.

Checking the Installation

1. On the Local and Remote Extender, check that the Power, Status, Link and Host LEDs are on.

• If the Host or Link LEDs are permanently off, then the cabling between the Local and Remote

Extenders may not be installed properly or is defective.

2. For Windows users (XP, 7, 8), open Device Manager to conﬁrm that the RG2304 has installed

correctly. Expand the entry for Universal Serial Bus controllers by clicking the “+” sign. If the

RG2304 has been installed correctly, you should ﬁnd it listed as a“Generic USB Hub”.

To open Device Manager in Windows XP:

Right click “My Computer” then select: Properties >> Hardware tab >> Device Manager

To open Device Manager in Windows 7 or 8

Open the Start menu, right click on“Computer” then select: Manage >> Device Manager

3. For Mac OS X users, open the System Proﬁler to conﬁrm that the RG2304 has installed correctly.

In the left hand column under Hardware, select“USB” and inspect the right hand panel. If the RG2304

has been installed correctly, you should ﬁnd it listed as a“Hub”under the USB High-Speed Bus/USB

Bus.

To open System Proﬁler in OS X: Open the Finder, select Applications, then open the Utilities folder and double

click on the System Proﬁler icon.

4. If the RG2304 is not detected correctly or fails to detect, please consult the Troubleshooting

Section later in this guide.

note

Connecting a USB Device

1. Install any software required to operate the USB device(s). Refer to the documentation for the USB

device(s), as required.

2. Connect the USB device to the device port on the Remote Extender.

3. Check that the device is detected and installed properly in the operating system.

Compatibility

The USB 2.0 RG2304 complies with USB 1.1 and USB 2.0 speciﬁcations governing the design of USB

devices. However, Icron Technologies Corporation does not guarantee that all USB devices or hosts will

be compatible with the RG2304, as there are a number of different characteristics that may impact the

operation of USB devices over extended distances.

Andere Handbücher für USB 2.0 RG2304

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Icron Extender Handbücher

Icron

Icron RG2324 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2101 Bedienungsanleitung

Icron

Icron Raven 3124 LEX Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2204 Bedienungsanleitung

Icron

Icron USB 3.0 Spectra 3022 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2311 Bedienungsanleitung

Icron

Icron Spectra 3022 Bedienungsanleitung

Icron

Icron USB 3-2-1 Raven 3104 Bedienungsanleitung

Icron

Icron RG2204 Bedienungsanleitung

Icron

Icron USB Ranger 2212 Bedienungsanleitung

Icron

Icron EL3500 Bedienungsanleitung

Icron

Icron USB 2.0 RG2304GE-LAN Bedienungsanleitung

Icron

Icron Spectra 3001-15 Bedienungsanleitung

Icron

Icron USB Rover 2850 Bedienungsanleitung

Icron

Icron Spectra 3022 Bedienungsanleitung

Icron

Icron USB 3-2-1 Raven 3124 Bedienungsanleitung

Icron

Icron 422 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2304 Bedienungsanleitung

Icron

Icron USB Rover 1850 Bedienungsanleitung

Icron

Icron USB Ranger 2244 Bedienungsanleitung

Icron

Icron USB Ranger 2211 Bedienungsanleitung

Icron

Icron Ranger 2104 Bedienungsanleitung

Icron

Icron 100 Bedienungsanleitung

Icron

Icron EL5353 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung