IDataLink Maestro AR Bedienungsanleitung

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro AR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-AR-TOY03

PRODUCTS REQUIRED

iDatalink Maestro AR Ampliﬁer Replacement Interface

iDatalink Maestro aTO3 Installation Harness

INSTALL GUIDE

SUBARU FORESTER

20162018

ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,

WITHOUT CHANGING YOUR RADIO.

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-AR-TOY03 maestro.idatalink.com

SUBARU FORESTER 20162018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro /

Rockford Fosgate DSR1 Ampliﬁer

replacement solution. You are

now a few simple steps away from

enjoying your new car ampliﬁer.

Before starting your installation,

please ensure that your module

is programmed with the correct

ﬁrmware for your vehicle and that

you carefully review the install

guide.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Vehicle Wire Reference Chart 5

ADS-AR-TOY03 maestro.idatalink.com

SUBARU FORESTER 20162018

INSTALLATION INSTRUCTIONS

STEP 1

• Remove the factory ampliﬁer (refer to wire chart for

ampliﬁer location).

• Connect the factory ampliﬁer harnesses to the aTO3

T-harness.

STEP 2

• Connect the wires from the aTO3 T-harness to the

aftermarket ampliﬁer.

Note 1:

If you are running your own speaker wires from the

ampliﬁer to the speakers, this step is not necessary.

Note 2:

The ampliﬁer output colors and labels on the aTO3

T-harness do not correspond to the vehicle. For vehicle

speciﬁc wiring designation, see the wiring chart.

• Plug the connector from the aTO3 T-Harness into the

aftermarket ampliﬁer.

• Plug the Data cable to the data port of the aftermarket

ampliﬁer.

STEP 3

• Connect all the harnesses to the Maestro AR module.

Note 3:

The aftermarket ampliﬁer will not turn OFF with the key, it

will shut down when the vehicle goes to sleep.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

ADS-AR-TOY03 maestro.idatalink.com

SUBARU FORESTER 20162018

A B

AMP TURN ON

INPUT 1

INPUT 2

INPUT 8

INPUT 5

INPUT 6

INPUT 7

INPUT 3

INPUT 4

CONNECTIONS NOT REQUIRED

WIRING DIAGRAM

STEP 2

WIRES FROM

VEHICLE

STEP 3 MAESTRO AR MODULE

DATA

CABLE

KENWOOD AMPLIFIER

SECOND AMP

18 PIN CONNECTOR

N.C.

CONNECT THE BLUE WIRE (PIN 16)

TO SECOND AMPLIFIER (IF PRESENT)

(TO TURN IT ON)

STEP 1

aTO3 T-HARNESS

FACTORY AMPLIFIER

HARNESSES

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

GREEN

GREEN/BLACK

PURPLE/BLACK

GRAY/RED

WHITE/RED

GRAY

WHITE

PURPLE

ORANGE

ORANGE/BLACK

ORANGE

ORANGE/RED

ADS-AR-TOY03 maestro.idatalink.com

SUBARU FORESTER 20162018

VEHICLE WIRE REFERENCE CHART

T-Harness Wires Vehicle Wires

Wire

Tag

Wire

Color Speaker Wire Description

INPUT 1 White Right Rear Speaker (+)

White/Black Right Rear Speaker (-)

INPUT 2 Gray Left Rear Speaker (+)

Gray/Black Left Rear Speaker (-)

INPUT 3 Orange Right Subwoofer (+)

Orange/Black Right Subwoofer (-)

INPUT 4 Orange Left Subwoofer (+)

Orange/Red Left Subwoofer (-)

INPUT 5 Green Right Front Speaker (+)

Green/Black Right Front Speaker (-)

INPUT 6 Purple Left Front Speaker (+)

Purple/Black Left Front Speaker (-)

INPUT 7 Gray Left Front Tweeter (+)

Gray/Red Left Front Tweeter (-)

INPUT 8 White Right Front Tweeter (+)

White/Red Right Front Tweeter (-)

Ampliﬁer location: Under driver seat

Note: The ampliﬁer output colors and labels on the aTO3 T-harness do not correspond to the vehicle. For vehicle speciﬁc wiring

designation, follow this wiring chart.

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-AR-TOY03

PRODUCTS REQUIRED

iDatalink Maestro AR Ampliﬁer Replacement Interface

iDatalink Maestro aTO3 Installation Harness

INSTALL GUIDE

SUBARU WRX

20162018

ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,

WITHOUT CHANGING YOUR RADIO.

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-AR-TOY03 maestro.idatalink.com

SUBARU WRX 20162018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro /

Rockford Fosgate DSR1 Ampliﬁer

replacement solution. You are

now a few simple steps away from

enjoying your new car ampliﬁer.

Before starting your installation,

please ensure that your module

is programmed with the correct

ﬁrmware for your vehicle and that

you carefully review the install

guide.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Vehicle Wire Reference Chart 5

ADS-AR-TOY03 maestro.idatalink.com

SUBARU WRX 20162018

INSTALLATION INSTRUCTIONS

STEP 1

• Remove the factory ampliﬁer (refer to wire chart for

ampliﬁer location).

• Connect the factory ampliﬁer harnesses to the aTO3

T-harness.

STEP 2

• Connect the wires from the aTO3 T-harness to the

aftermarket ampliﬁer.

Note 1:

If you are running your own speaker wires from the

ampliﬁer to the speakers, this step is not necessary.

Note 2:

The ampliﬁer output colors and labels on the aTO3

T-harness do not correspond to the vehicle. For vehicle

speciﬁc wiring designation, see the wiring chart.

• Plug the connector from the aTO3 T-Harness into the

aftermarket ampliﬁer.

• Plug the Data cable to the data port of the aftermarket

ampliﬁer.

STEP 3

• Connect all the harnesses to the Maestro AR module.

Note 3:

The aftermarket ampliﬁer will not turn OFF with the key, it

will shut down when the vehicle goes to sleep.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

ADS-AR-TOY03 maestro.idatalink.com

SUBARU WRX 20162018

A B

AMP TURN ON

INPUT 1

INPUT 2

INPUT 8

INPUT 5

INPUT 6

INPUT 7

INPUT 3

INPUT 4

CONNECTIONS NOT REQUIRED

WIRING DIAGRAM

STEP 2

WIRES FROM

VEHICLE

STEP 3 MAESTRO AR MODULE

DATA

CABLE

KENWOOD AMPLIFIER

SECOND AMP

18 PIN CONNECTOR

N.C.

CONNECT THE BLUE WIRE (PIN 16)

TO SECOND AMPLIFIER (IF PRESENT)

(TO TURN IT ON)

STEP 1

aTO3 T-HARNESS

FACTORY AMPLIFIER

HARNESSES

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

GREEN

GREEN/BLACK

PURPLE/BLACK

GRAY/RED

WHITE/RED

GRAY

WHITE

PURPLE

ORANGE

ORANGE/BLACK

ORANGE

ORANGE/RED

Andere Handbücher für Maestro AR

Andere iDataLink Aufnahmegeräte Handbücher

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch

iDataLink Maestro AR Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken