Idea-fly IFLY4 Multi-Copter Bedienungsanleitung
1
IFLY4 Multi-Copter
User Manual
ShenZhen Idea-fly Technology Co., Ltd.
http://idea-fiy.com
2
Statements.................................................................................................... 3
Preface.......................................................................................................... 4
Introduction.................................................................................................. 5
Specification ................................................................................................. 6
Radio transmitter.......................................................................................... 7
Connecting radio receiver............................................................................. 7
Calibrate the radio transmitter ........................................................8
Tuning angles of camera mount ......................................................8
Power supply ................................................................................................ 9
Turn on the flight ........................................................................................ 10
Turn off ....................................................................................................... 11
Fixing propellers ......................................................................................... 12
Control modes .................................................................................... 14
Firmware ............................................................................................ 15
Working state checking............................................................................... 16
Operation.................................................................................................... 17
Fuselage folding.................................................................................. 19
Warning and Caution.......................................................................... 20
3
Statements
THIS PRODUCT IS NOT A TOY!
It is a sophisticated product for sports and leisure, and a
combination of mechanics, electronics, aerodynamics and
high-frequency radio technologies. The operator should follow
instructions and security rules. Proper Installation and test are
compulsory to avoid accidents. Inappropriate operation may
cause serious damages. We are not responsible for them.
Please read this statement carefully and use this product strictly
following all these instructions .
This product is an R/C hobby model rather than a toy. Any
operation should be compliant to safety instructions, local laws
and regulations. We are not liable for any behaviour against
them, or any consequence caused by those behaviours.
This product is only suitable for expert, who is definitely no
younger than 12 years old.
Please use it in the field approved by local government, laws or
regulations.
We are not responsible for any civil or criminal liabilities caused
by improper operation or illegal usage.
If you have questions about usage, operation, maintenance or
any other issues, please contact local distributors.
4
Preface
Dear Customer:
Thanks for choosing idea-fly R/C hobby product! To handle it as fast as
possible, please read all instructions carefully. In addition, please keep this
manual for further reference in the future.
The flight is equipped with high-performance electronic flight controller,
foldable fuselage, highly-efficient brushless motors and high-speed, silent
motor governor. High-capacity Li-Poly battery supplies quite good payload
ability. Additional high-performance camera mount supplies ability of
aerial video and photography with camera or DV.
The fuselage is made of high-strength engineering plastics, which reduces
weight and cost effectively.
It will make much more fun for your photography.
5
Introduction
Cool appearance and foldable design
Four low-noise brushless motors
High-performance flight control system(flight controller + motor governor
+ power connector )
Net weight: 620g（exclude radio receiver and battery）
Payload：450g(exclude radio receiver and battery)
Single axis camera mount(additional)
6
Specification
size
size: 57cm X 57cm
Distance between motors:
45cm
Height : 25.4cm
Weight & payload
Flight body weight: 640g
Payload: 500g
Maximum Takeoff Weight: 1,150g
Propeller
Material: Plastic
Propeller size: 10inch * 2
Anti-rotating Propeller : 10inch
* 2
Motor
Brushless Motor: (IFly2212)11.1v
Drive Configuration: direct drive for
each axis
Motor Governor:10A digital
governor
Camera Mount
Camera Mount with vibration
isolation
Material: carbon fiber
Number of axes: single axis
Working environment
Ambient Humidity: <%80
Ambient temperature: 0-60 (Celsius
degrees )
Ambient wind speed: < 4m/s
Bracket
High flexible plastic bracket
Power
Working voltage: 11.1v
Max working current: 20A
Warning voltage: 10.8V
Simulator: Manual mode, balance mode, hight locked mode
7
Radio transmitter
Before using IFLY4, you should connect and calibrate your radio
transmitter(radio controller). IFLY4 support ordinary PWM radio
transmitter like futaba\jr. IFLY4 may need at most 7 channels to achieve
flying forward/backward, tilting left/right, rotating around z axis,
controlling throttle , switching flight modes, tuning camera mount. To fly
it, you need at least 5 channels.
Caution: No mixtured throttle mode.
Taking Futaba receiver as an example.
Futaba RC
Receiver
Knob channel
Knob channel
2/3 position switch
4
3
2
1
8
Connecting radio receiver
A：Connecting to AILERON channel of receiver
E：Connecting to ELEVATORchannel of receiver
T：Connecting to THROTTLEchannel of receiver
R：Connecting to RUDDERchannel of receiver
F：Connecting to a 3-positions channel, this will be used to choose flight
modes. Please refer to ' flight modes ' part.
S1：Connecting to another channel which will be used to change pitch
angle of camera mount
S2：Connecting to another channel which will be used to change roll angle
of camera mount
P1：Connecting to servomotor which controls pitch angle of camera mount
P2：Connecting to servomotor which controls roll angle of camera mount
Calibrate the radio transmitter
IFLY4 support ordinary PWM radio transmitters. You should calibrate range
of joysticks, otherwise you can not start the flight or may cause accident.
Please refer to "Transmitter Calibration" part.
Tuning angles of camera mount
IFLY4 supports 2-axes(pitch and roll) camera mount with vibration isolation
and angle tunning function. Dedicated smoothly output control algorithm
provide fine vibration isolation quality during photographing.
9
Tunning pitch angle of camera mount
You need connect corresponding channel of receiver to S1 port of IFLY4
flight controller, and connect pitch servomotor to P1 port of IFLY4.
Tunning roll angle of camera mount
You need connect corresponding channel of receiver to S2 port of IFLY4
flight controller, and connect pitch servomotor to P2 port of IFLY4.
Tunning control parameters of camera mount
IFLY4 supplies complete parameter tunning interface of camera mount
control. Please refer to " camera mount control" part.
Power supply
IFLY4 support full voltage transformation, you just need one 3-cell
Li-battery to power it.
Low power alert
IFLY4 has low power alert function. When voltage of battery goes less then
10.8v, the speaker will beep and led will turn on. You should turn off the
flight and exchange your battery.
10
Turn on the flight
Push the throttle stick will not start the flight, you should follow these
steps instead.
1: pull the throttle joystick down to lowest position;
2:pull the rudder joystick to the left position;
3: motors start running at low speed. If this does not work, please check
transmitter channel settings or recalibrate the transmitter.
Mode1 throttle on right
hand side
Mode2 throttle on left
hand side
Caution：
Do place the flight stationarily when you start it, otherwise IFLY4 can not
work well.
Andere Handbücher für IFLY4 Multi-Copter
2
Inhaltsverzeichnis
Andere Idea-fly Drohne Handbücher
