IDEAL SecuriTEST Bedienungsanleitung

www.vemco.pl



SECURITEST USER’S MANUAL

TABLE OF CONTENTS

SAFETY PRECAUTIONS..................…………….......... 1

1. SAFETY INFORMATION.................…………….......2

WARNINGS ................…………….................2

SAFETY INFORMATION ..………….................3

BATTERY PRECAUTIONS ...……….................5

2. INTRODUCTION ....................………………........... 7

FEATURES ...............……………...................7

MAIN FUNCTIONS ....…………...................... 7

STANDARD ACCESSORIES ....…………..........8

DESCRIPTION OF BUTTONS/PORTS .……….....9

3. SPECIFICATIONS ...……………........…………...... 14

GENERAL SPECIFICATIONS ……….................14

METER SPECIFICATIONS .......…………......... 15

4. FUNCTIONAL USE .............…………….................. 17

POWER ON/OFF ..........…………......…...........17

ON SCREEN DISPLAY .....…………................17

OPERATION MODES .......…………................ 18

VIDEO FUNCTION ........………….................19

DIGITAL MULTIMETER FUNCTION …….........22

WARNINGS .................……………................28

PTZ CONTROL ..........………….....................29

UTP CABLE TESTER ...…………................... 34

SYSTEM INFORMATION ......…………............ 35

MAIN SETTINGS ............………….................35

www.vemco.pl



BEFORE USING SECURITEST

WARNING

Read the “Safety Information” portion of the manual before

using the SecuriTEST CCTV tester.

This manual is for users of the IDEAL SecuriTEST multi-

function CCTV tester. The manual describes the operation and

function of the various features of SecuriTEST.

It is highly recommended that operators read the entire manual

before using SecuriTEST to prevent damage to the tester or

injury to the operator.

www.vemco.pl



WARNING

SECURITEST SAFETY PRECAUTIONS

When using the Digital MultiMeter function to measure

voltage or current, be sure that the input does not exceed the

capabilities of the tester. Overloading the tester can cause

damage or personal injury.

When measuring current of unknown values, always begin

with the 10A mode, then step down to the 400mA input if

necessary.

Environmental Limitations

Temperature: -10 to 50 degrees C

14 to 122 degrees F

Relative Humidity: 0-90%, non-condensing

DC input voltage: 12V +/-10%, 1A

www.vemco.pl





Do not use the unit in damp conditions or environments where

explosive gases may be present.

Do not handle the unit with wet hands.

Avoid dropping or causing mechanical shock to the unit.

Do not expose the ports to liquids and avoid exposure to dust.

Use only specified replacement fuses.

Do not use damaged test leads with the DMM function.

Do not measure resistance on powered circuits.

When using the DMM function, set the proper mode before

connecting to the circuit under test.

When measuring resistance, make certain that the circuit is de-

energized before connecting the test leads to the circuit.

www.vemco.pl



This page intentionally left blank.

www.vemco.pl





WARNING

BATTERY CHARGING PRECAUTIONS

SecuriTEST is capable of

recharging NiMH batteries

installed in its battery

compartment.

Attach the included 12V adapter to

the handset to charge the batteries.

Charging time takes 8 hours.

Operation time is approximately 3-

4 hours on a fully charged set of

batteries.

When using alkaline batteries the

tester can run for approximately 2

hours on a new set of batteries.

When using alkaline batteries, set

the switch inside the battery

compartment to OFF to prevent

accidental charging of alkaline

batteries.

www.vemco.pl



- Battery Precautions -

The following batteries can be used with SecuriTEST:

> AA size alkaline batteries

> AA size rechargeable nickel metal hydrogen

(Ni-MH) batteries

When charging batteries in SecuriTEST:

Place both the MAIN POWER and the CHARGE SWITCH to

the “ON” position. The charge LED will light when the

MAIN POWER SWITCH is in either position, but the

batteries will only charge when the switch is set to “ON”.

The CHARGE SWITCH is located on the upper part of

battery compartment. (Refer to the figure below)

The performance of batteries can be very different, depending

on manufacturers. Please use any reputable brand for best

performance. Do not mix batteries of different manufacturers

when charging batteries. Make sure not to reverse the

polarization of the batteries. Do not short-circuit or

disassemble batteries. Make sure to check the polarization

and the voltage and current ratings before charging batteries

and disconnect the charger immediately should an abnormal

situation arise.

www.vemco.pl





FEATURES

SecuriTEST is a portable device for testing and

troubleshooting various functions of CCTV cameras. It

includes functions to test video image quality, control PTZ

operation, analyzes various PTZ protocols, generates video

test patterns, test UTP cables and includes a full-function

Digital MultiMeter.

All functions are controlled through the front keypad and on-

screen display. For testing each function, set up modes and

capacities to be tested, using the keypad located on the front

part of SecuriTEST.

MAIN FUNCTIONS OF SECURITEST

Video Tester The video signal and the quality of

picture can be tested, and brightness,

color and focus can also be adjusted

while the image is being watched.

Video signal generator mode: Outputs

color bars, Red Blue and Green to allow

technicians to inspect video monitor or

DVR. Supports both PAL & NTSC

video signal formats.

Multimeter Voltage, current, resistance and

continuity can be tested.

PTZ Controller The PTZ controller tests the motor

control of the dome and the focus and

zoom functions of the camera. Supports

RS-485/422 communications protocols.

UPT Cable Tester The UTP cable check tests unshielded

cables for continuity, opens, shorts and

miswired pairs.

www.vemco.pl



STANDARD ACCESSORIES

The following items are included with the SecuriTEST CCTV

Tester.

•SecuriTEST Main Body

•User’s Manual

•Test Lead Set (Red, Black)

•AC Adapter

•Rechargeable AA Nickel Metal Hydrogen

(Ni-MH) Battery (6ea)

•Neck Strap

•UTP test Terminator

•BNC Video Cable

•Car Power Jack

www.vemco.pl

Andere Handbücher für SecuriTEST

Inhaltsverzeichnis

Andere IDEAL Prüfgeräte Handbücher

IDEAL

IDEAL 61-534 Bedienungsanleitung

IDEAL

IDEAL 61-085 Bedienungsanleitung

IDEAL

IDEAL 61-521 Bedienungsanleitung

IDEAL

IDEAL OTDR Bedienungsanleitung

IDEAL

IDEAL SecuriTEST PRO Konfigurationshandbuch

IDEAL

IDEAL 61-954 Bedienungsanleitung

IDEAL

IDEAL SecuriTest IP Bedienungsanleitung

IDEAL

IDEAL 61-520 Bedienungsanleitung

IDEAL

IDEAL ABS Bedienungsanleitung

IDEAL

IDEAL VoltAware 61-025 Bedienungsanleitung

IDEAL

IDEAL Vol-Con Elite Bedienungsanleitung

IDEAL

IDEAL Super Series 4 Bedienungsanleitung

IDEAL

IDEAL 61-796 Bedienungsanleitung

IDEAL

IDEAL 61-085 Bedienungsanleitung

IDEAL

IDEAL 61-521 Bedienungsanleitung

IDEAL

IDEAL Volt Sensor 61-063 Bedienungsanleitung

IDEAL

IDEAL Vol-Con 61-076 Bedienungsanleitung

IDEAL

IDEAL Volt Sensor 61-063 Bedienungsanleitung

IDEAL

IDEAL VDV PRO 33-771 Bedienungsanleitung

IDEAL

IDEAL VoltAware NCV Bedienungsanleitung

IDEAL

IDEAL ABS Signal Thrower 62-184 Bedienungsanleitung

IDEAL

IDEAL 61-830 Bedienungsanleitung

IDEAL

IDEAL 61-517 GFCI Gebrauchs- und Pflegehandbuch

IDEAL

IDEAL 61-795 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung