For more information, visit http://asia.idec.com
E-065
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Safety Products
Interlock
Switches
Non-contact
Interlock Switches
Safety Laser
Scanners
Safety Light
Curtains
Safety Modules
HS6B
HS6E
HS5D
HS5L
HS1L
Actuators for
HS1/HS5/HS6
Actuators/
Padlock Hasp
HS1/HS5/HS6 Series Actuators
Dimensions (HS5 Series) All dimensions in mm.
Straight (HS9Z-A51)
Note: Actuator Stop
(supplied with the actuator)
26
15
28
20
2
10
0.85.2
(6)
6.4
2
2-M4 Screw 20
Actuator Mounting Hole Layout
(Straight, Right-angle)
Straight with Rubber Bushings (HS9Z-A51A)
15.3
15
2-ø4.3
2
12
0.8 (20)
0.8
2-ø10
2-ø9
When
mounted (5)
Washer (supplied)
Rubber Bushing
Note: Actuator Stop
(supplied with
the actuator)
*The mounting center distance is set to 12 mm
at the factory. When a 20mm distance is
required, adjust the distance by moving the
rubber bushing sideways.
*The actuator has flexibility to the direction
indicated by the arrows.
*Mounting centers can be widened to 20mm by
moving the Rubber Bushings.
*Mounting centers must be 12 or 20mm.
Vertical
Swing
Actuator Mounting Hole Layout
(Straight with Rubber Bushings)
(Right-angle with Rubber Bushings)
12
2-M4 Screw
Right-angle (HS9Z-A52) Right-angle with Rubber Bushings (HS9Z-A52A)
15
2
2-ø4.4
20
28
0.84.5
.27.2
1.6
Note: Actuator Stop
(supplied with the actuator)
Vertical
Swing
Horizontal
Swing
*When the mounting center distance is set
to 12mm at the factory, the actuator has
flexibility both vertically and horizontally.
*When the mounting center distance is set
to 20mm, the actuator swings vertically.
Adjust the distance by moving the rubber
bushings.
30
15
15.8
8.5
0.8
2
0.8
(11.2)
When
mounted
When
mounted
(5)
2-ø9
2-ø10
2-ø4.3
12
(20)
Note: Actuator Stop
(supplied with the actuator)
Rubber Bushing Washer (supplied)
Mounting centers must be 12 or 20mm.
20
5
R3.2
72
58
44
33 max.
12 (21)
1
20°
29
58
2-M6
Screw
18
Actuator Mounting
Hole Layout
(Angle Adjustable [vertical])
Angle Adjustment
(M3 hexagon socket head bolt)
Door Hinge
Side
(supplied with the actuator)
(M4 Hole)
R2.1
20°
20°
Note: Actuator Stop Film
(supplied with the actuator)
(M3 hexagon socket head bolt)
Angle Adjustment
(M3 hexagon socket head bolt)
(Vertical Swing)
Orienting
Insert
Orienting
Insert
14.4 7
18.5 28.5
3
3.6
1
23
26
38
Note: Actuator Stop Film
(supplied with the actuator)
0.8
2
382-M4 Screw
Actuator Mounting Hole Layout
(Angle Adjustable)
(vertical/horizontal)
Note: The actuator stop lm and actuator stop are supplied with the actuator
and used when adjusting the actuator position. Remove after the actuator
position is determined.
Angle Adjustable (vertical) (HS9Z-A53) Angle Adjustable (vertical/horizontal) (HS9Z-A55)
