Idex X-Smart Pro Bedienungsanleitung
2
X-Smart Pro
© Fast & Fluid Management B.V.
This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, nor otherwise, without the prior written permission of Fast &
Fluid Management B.V.
This manual could contain technical inaccuracies ortypographical errors.
Fast & Fluid Management B.V. reserves the right to revise this manual from time to time in the contents thereof without
the obligation of Fast & Fluid Management B.V. to notify any person of such revision or change. Details and values given
in this manual are average values and have been compiled with care. They are not binding, however, and Fast & Fluid
Management B.V. disclaims any liability for damage or detriments suffered as a result of reliance on the information given
herein or the use of products, processes or equipment to which this manual refers. No warranty is made that the use of
the information or of the products, processes, or equipment to which this manual refers will not infringe any third party's
patents or rights. The information given does not release the user from making their own experiments and tests.
X-Smart Pro
Table of Contents
V 2.0
3
Table of Contents
1 About this manual..................................................................................................................... 5
1.1
How to work with the manual ................................................................................................................................ 5
1.2
Record of changes................................................................................................................................................. 5
2 Safety ......................................................................................................................................... 6
2.1
Intended use........................................................................................................................................................... 6
2.2
Liability.................................................................................................................................................................... 6
2.2.1
General liability.............................................................................................................................................. 6
2.2.2
Machine-specific liability................................................................................................................................ 6
2.3
User qualification for installation ............................................................................................................................ 7
2.4
Safety symbols on the machine............................................................................................................................. 7
2.5
Safety symbols in the manual................................................................................................................................ 7
2.6
Disposal of the machine......................................................................................................................................... 7
3 Operator manual ....................................................................................................................... 8
3.1
Description.............................................................................................................................................................. 8
3.1.1
Overview of the machine............................................................................................................................... 8
3.1.2
Overview of the machine............................................................................................................................... 9
3.1.3
Type plate: serial number ............................................................................................................................. 9
3.1.4
Type plate: details ........................................................................................................................................10
3.2
Operation...............................................................................................................................................................10
3.2.1
General dispensing procedure .....................................................................................................................10
3.2.2
Placing a can................................................................................................................................................11
3.3
Maintenance..........................................................................................................................................................11
3.3.1
General cleaning: after every dispensing operation.....................................................................................11
3.3.2
Cleaning the brush container: daily..............................................................................................................11
3.3.3
Refilling a canister........................................................................................................................................13
3.3.4
Using the emergency stop switch ................................................................................................................14
4 Installation ............................................................................................................................... 16
4.1
Unpacking the machine.........................................................................................................................................16
4.2
Put the machine in position...................................................................................................................................17
4.2.1
Move the machine to the final position ........................................................................................................17
4.3
Connect the computer...........................................................................................................................................18
4.3.1
Connect the computer..................................................................................................................................18
4.4
Turning on the machine........................................................................................................................................18
4.5
First use.................................................................................................................................................................18
5 Troubleshooting...................................................................................................................... 19
5.1
General troubleshooting procedure.......................................................................................................................19
5.2
Contact service......................................................................................................................................................19
5.3
Troubleshooting guide...........................................................................................................................................19
X-Smart Pro
Table of Contents
V 2.0
4
6 Technical data......................................................................................................................... 20
6.1
General specifications ...........................................................................................................................................20
6.2
Dimensions and mass...........................................................................................................................................20
6.3
Ambient conditions ................................................................................................................................................20
6.4
Noise level.............................................................................................................................................................21
6.5
Safety classifications .............................................................................................................................................21
6.6
Electrical specifications .........................................................................................................................................21
6.7
Electrical diagram..................................................................................................................................................22
X-Smart Pro
5
1
About this manual
The manual shows the information necessary to:
-
install the machine
-
operate the machine
-
perform basic maintenance
-
correct small problems.
The X- Smart Pro and all its versions are referred to in the manual as the 'machine'.
This manual contains the original instructions. The original language of the manual is English. All other
language versions are translations of the original instructions.
1.1
How to work with the manual
1. Tofamiliarizeyourself with thestructure and content.
2. To read the safety chapter in detailand make sure you understand all the instructions. See Safety on
page 6.
3. Tocarry out the actions completely and in the given sequence.
1.2
Record of changes
Edition
Editor
Check
Date
Description
1.0
WBS
07/2017
First edition
2.0
JSN
TB
10/2017
Modification Brush,
Type plates
Safety
X-Smart Pro
V 2.0
6
2
Safety
Read the manual before you install or use the machine. Failure to do socan result in personal
injury, death or property damage.
2.1
Intended use
The machine is designed to dispense colorants into a can. Any other use of the machine is strictly
forbidden.
Fast & Fluid Management B.V. will not accept any responsibility incase of modifications tomachines and/
or accessories.
2.2
Liability
2.2.1
General liability
Fast & Fluid Management B.V. is not liable if you do not followthe rules below:
-
Themachine is for indoors use only.
-
Thismachine may only be used for commercial settings. The machine is not a household appliance.
-
Observe all local safety regulations.
-
Mind the minimal requirementof the building structure of the load capacity of the floor.
-
Placethe machine in a well-litand well-ventilated room.
-
Install and connect the machine according to the instructions in this manual.
-
Connect the machine to a grounded wall socket.
-
Do not use extension cords ofinadequately rated power cables.
-
Make sure that the power cable is freely accessible.
-
Do not place objects on top of the machine.
-
Do not usea damagedmachine. When you have doubts, contact your supplier. See Contact service on
page 19.
-
Keep themachine in good condition. Make sure that defective parts are immediately replaced.
-
Replace parts only with original Fast & Fluid Management B.V. spare parts.
All maintenance beyond the scope of this manual must be carried out by a qualified service technician that
Fast & Fluid Management B.V. has trained and certified.
2.2.2
Machine-specific liability
Thismachine is designed to dispense colorants into a can innon-hazardous conditions.
Please consult the health & safety officer of your paint supplier and/or colorant supplier on how to avoid
the emergency of hazardous situations like personal harm or the risk for fire and explosions.
-
Personal harm should be avoided bystrictly following the materials safety data sheets (MSDS) for
colorants, (base) paint and brush liquids.
Safety
X-Smart Pro
V 2.0
7
-
Donot use flammable liquids in the brush container.
-
The useof flammable colorants or colorants that diffuse potential explosive vapors may present fire
and explosion risks.
2.3
User qualification for installation
Only install the machine if youhave written permission from the supplier of the machine.
2.4
Safety symbols on the machine
Rotating parts hazard Electrical hazard
Read the manual Instruction
2.5
Safety symbols in the manual
Warning
Can cause personal injury.
Caution
Can cause damage to the
machine.
Note
Shows further information.
2.6
Disposal of the machine
1. Sort the machine, the accessories and the packaging for
environmentally friendly recycling.
2. Do not dispose of the machine into domestic waste. Dispose
of the machine according to local regulations.
3. Dispose of the canisters as chemical waste, according to the
local regulations.
Operator manual
X-Smart PRO
V 2.0
8
3
Operator manual
3.1
Description
3.1.1
Overview of the machine
J
I
H
G
F
A
B
C
D
A:
Front door
F:
Brush container
B:
Emergency stop switch
G:
Pump with nozzle
C:
Shelf holder
H:
Canister
D:
Can table
I:
Agitator
E:
Wheels
J:
Lid
Operator manual
X-Smart PRO
V 2.0
9
C
A
B
3.1.2
Overview of the machine
A: Machine status leds
B: Can sensor
C: Display glass
3.1.3
Type plate: serial number
Operator manual
X-Smart PRO
V 2.0
10
3.1.4
Type plate: details
3.2
Operation
Warning
Only push the emergency stop switch incase of a safety emergency.
Make sure that the problem is solved before you reset the emergency stop switch.
When you reset the emergency stop switch, the machine restarts automatically. When the
machine is operational, you hear 'beep beep'. Status lights will light up.
Caution
Do not removethe power from the machine. The machine must stir the colorants periodically.
3.2.1
General dispensing
procedure
For all the dispense software instructions: see the dispense software documentation.
1.
Place the can table in the correct slots for the correct height. See Placing a can on page 11.
2.
Place the can. See Placing a can on page 11.
3.
Choosethe recipe and dispense. See the dispense software documentation.
4.
Remove the can.
Inhaltsverzeichnis
Andere Idex Spender Handbücher
