Idis DA-ES1104-A Bedienungsanleitung
eSATA
External
Storage
Operation Manual
DA-ES1104(-A)
DA-ES1104B(-A)
DA-ES1104C(-A)
DA-ES1104D(-A)
2
Before reading this manual
This operation manual contains basic instruction on installing and using eSATA External Storage, an IDIS product.
Users who are using this product for the rst time, as well as users with experience using comparable products, must
read this operation manual carefully before use and heed to the warnings and precautions contained herein while
using the product. Safety warnings and precautions contained in this operation manual are intended to promote
proper use of the product and thereby prevent accidents and property damage and must be followed at all times.
Once you have read this operation manual, keep it at an easily accessible location for future reference.
• Unauthorized reproduction of this manual is prohibited.
• The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and
accessories or from the user's failure to comply with the instructions contained in this operation manual.
• It is recommended that rst-time users of eSATA External Storage and individuals who are not familiar with its use seek
technical assistance from their retailer regarding product installation and use.
• If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and
seek professional assistance.
• Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for
commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.
The information in this manual is believed to be accurate as of the date of publication. We are not responsible for
any problems resulting from the use thereof. The information contained herein is subject to change without notice.
Revisions or new editions to this publication may be issued to incorporate such changes.
Safety Symbols
Symbol Description
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
Before reading this manual
3
In-Text
Symbol Type Description
Note Useful information concerning a specic function.
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN WHICH
CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government oce, for details of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
4
Safety Precautions
Information contained in this section of the manual serve
to prevent accidents and property damage through
proper use of the product. Please read the following
instructions carefully and follow them at all times.
• Read Instructions
All the safety and operating instructions should be
read before the appliance is operated.
• Retain Instructions
The safety and operating instructions should be
retained for future reference.
• Cleaning
Unplug this equipment from the wall outlet before
cleaning it. Do not use liquid aerosol cleaners. Use a
damp soft cloth for cleaning.
• Attachments
Never add any attachments and/or equipment without
the approval of the manufacturer as such additions
may result in the risk of re, electric shock or other
personal injury.
• Water and/or Moisture
Do not use this equipment near water or in contact
with water.
• Ventilation
Place this equipment only in an upright position. This
equipment has an open-frame Switching Mode Power
Supply (SMPS), which can cause a re or electric shock
if anything is inserted through the ventilation holes on
the side of the equipment.
• Placing and Accessories
Do not place this equipment on an unstable cart,
stand or table. The equipment may fall, causing serious
injury to a child or adult, and serious damage to the
equipment.
This equipment and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the equipment and cart
combination to overturn.
• Power Sources
This equipment should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power, please consult your
equipment dealer or local power company.
• Power Cords
Operator or installer must remove power and TNT
connections before handling the equipment.
• Lightning
For added protection for this equipment during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the equipment
due to lightning and power-line surges.
• Overloading
Do not overload wall outlets and extension cords as
this can result in the risk of re or electric shock.
• Objects and Liquids
Never push objects of any kind through openings of
this equipment as they may touch dangerous voltage
points or short out parts that could result in a re or
electric shock. Never spill liquid of any kind on the
equipment.
• Servicing
Do not attempt to service this equipment yourself.
Refer all servicing to qualied service personnel.
Safety Precautions
5
• Damage requiring Service
Unplug this equipment from the wall outlet and refer
servicing to qualied service personnel under the
following conditions:
A. When the power-supply cord or the plug has been
damaged.
B. If liquid is spilled, or objects have fallen into the
equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by
following the operating instructions, adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by
a qualied technician to restore the equipment to its
normal operation.
E. If the equipment has been dropped, or the cabinet
damaged.
F. When the equipment exhibits a distinct change in
performance — this indicates a need for service.
• Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specied by the manufacturer or that have the same
characteristics as the original part. Unauthorized
substitutions may result in re, electric shock or other
hazards.
• Safety Check
Upon completion of any service or repairs to this
equipment, ask the service technician to perform
safety checks to determine that the equipment is in
proper operating condition.
• Field Installation
This installation should be made by a qualied service
person and should conform to all local codes.
• Correct Batteries
Warning: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions.
• Tmra
A manufacturer’s maximum recommended ambient
temperature (Tmra) for the equipment must be
specied so that the customer and installer may
determine a suitable maximum operating environment
for the equipment.
• Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack
environment may be greater than room ambient.
Therefore, consideration should be given to installing
the equipment in an environment compatible with the
manufacturer’s maximum rated ambient temperature
(Tmra).
• Reduced Air Flow
Installation of the equipment in the rack should be
such that the amount of airow required for safe
operation of the equipment is not compromised.
• Mechanical Loading
Mounting of the equipment in the rack should be such
that a hazardous condition is not caused by uneven
mechanical loading.
• Circuit Overloading
Consideration should be given to connection of
the equipment to supply circuit and the eect
that overloading of circuits might have on over
current protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should
be used when addressing this concern.
• Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should
be maintained. Particular attention should be given to
supply connections other than direct connections to
the branch circuit (e.g., use of power strips).
CAUTION: There is risk of explosion if the battery is replaced with an incorrect type. Dispose used
batteries according to the instructions. This equipment is intended for indoor use only and all the
communication wiring must be limited to indoors.
6
Table of Contents
1
2
3
Part 1 – Introduction.........................................7
Product Features ................................................................7
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview .......................................................................8
Front Panel................................................................................8
Rear Panel ................................................................................9
Part 2 – Installation .........................................11
Compatible HDD Models .......................................................11
Installation .....................................................................12
RAID Initialization ..............................................................15
NVR Connection................................................................16
Part 3 - Conguration .......................................17
RAID Option Swich Settings.....................................................17
SATA Port Multiplier ............................................................18
Conguring RAID...............................................................19
RAID Rebuilding................................................................22
Specications ..................................................................22
7
Product Features
This product is a 19-inch, rack-mount Serial ATA (SATA) external storage device, oering easy cabinet installation
with a Network Video Recorder (NVR) and excellent space savings with support for up to four SATA hard drives. It also
provides RAID (Redundant Array of Independent Disks) support for improved data stability and performance. Key
features include:
• 19-inch rack-mount type
• Best combination with DirectIP™ NVR
• SATA to SATA Port Multiplier
• Up to 3.0 Gbps data transfer rate (SATA II)
• Up to four SATA hard drives
• Enhanced data stability and performance with various levels of RAID support (0, 1+0, 5)
• Error warning using audio and LED indicators
• Mute button for turning o audio warnings
• Easy scalability
Accessories
Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included.
• eSATA external storage device
• AC power cable
• eSATA cable
• Manual
• Screws for installing hard drives
The screws for installing hard drives are not provided separately if hard drives are already installed in the unit.
Part 1 – Introduction
Table of Contents
8
Overview
Front Panel
3 41 2
1PWR (Power LED) 2D1 to D4 (HDD/RAID mode LED)
3eSATA (eSATA LED) 4Setup Button
1PWR (Power LED)
Lit when the system is operating.
2D1 to D4 (HDD/RAID mode LED)
Displays the RAID mode or HDD status depending on the RAID option switch settings.
For more information, refer to the Part 3 - Conguration
3eSATA (eSATA LED)
Blue LED is lit when the unit is connected to a NVR.
4Setup Button
Initializes RAID or mutes audio warnings. If the button is locked using the RAID option switches on the rear panel,
you cannot initialize the RAID or mute audio warnings.
System status indicated by audio warnings can be identied by the frequency of beeps per second.
• Once per second: FAN error has occurred.
• Twice per second: RAID rebuilding has started.
• Three times per second: HDD error has occurred.
• Five times per second: RAID initialization has started.
Table of Contents
9
Rear Panel
3
4
12
1Cooling Fan 2RAID Option Switch
3eSATA Port 4Power Connector
1Cooling Fan
Maintains the unit at an optimal temperature.
2RAID Option Switch
Congures RAID setting. For more information, refer to the Part 3 - Conguration
• 1. RAID TYPE 1 / 2. RAID TYPE 2: Congures the RAID modes.
• 3. DISPLAY: Congures the display mode of the D1 to D4 LED indicators on the front panel. If set to ON (up),
RAID mode is displayed. If set to OFF (down), HDD status is displayed.
• 4. LOCK: Locks (ON) or unlocks (OFF) the Setup button on the front panel. When the Setup button is locked, you
cannot initialize RAID or mute audio warnings. When the Setup button is locked, pressing the Setup button will
turn the Power LED o and releasing the Setup button will turns the Power LED back on.
3eSATA Port
For transferring data
4Power Connector
For connecting the power cable
Table of Contents
10
ROUTE POWER CABLE SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE SURE THAT THE POWER CABLE IS NOT
PINCHED OR ABRADED BY FURNITURE. DO NOT INSTALL POWER CABLE UNDER RUGS OR CARPETS. THE POWER
CABLE HAS A GROUNDING PIN. EVEN IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE,
DO NOT MODIFY THE PLUG. DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO SINGLE
POWER OUTLET.
• Make sure that the NVR system is turned OFF when connecting the unit to the NVR system.
• Before connecting the unit to the NVR, turn the NVR system OFF and remove the power cable from the NVR.
• Do NOT disconnect the eSATA cable while the unit or the NVR is operating. It may cause the unit or NVR to
malfunction.
• Power cables must be connected or removed in the following order.
– Connecting: Unit →NVR
– Removing: NVR →Unit
• Plug the power cables of the unit and the NVR into the same outlet.
• If the unit is shut down, the connection to the NVR will not resume automatically even when the unit is turned
back ON (e.g. a short power outage). In such case, reconnect the unit to the NVR in the following order.
– Turn the NVR system OFF →Remove the power cable from the unit →Check the eSATA cable connection →
Connect the power cable to the unit →Turn the NVR ON.
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Sprachen:
Andere Idis Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung