IDTECH USign 300 Bedienungsanleitung

USER MANUAL

uSign™

Signature Capture Module

Model uSign 300

80109504-001

0 - 8- 01

Page 2 o 10

uSign 300 User Manual

FCC WARNING STATEMENT

This equipment has been tested and ound to comply with the limits or a Class B digital

device, pursuant to Part 15 o FCC Rules. These limits are designed to provide reasonable

protection against harm ul inter erence when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio requency energy and,

i not installed and used in accordance with the instruction manual, may cause harm ul

inter erence to radio communications.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 o the FCC Rules. Operation o this device is subject to

the ollowing conditions: this device may not cause harm ul inter erence and this device

must accept any inter erence received, including inter erence that may cause undesired

operation.

CANADIAN DOC STATEMENT

This digital apparatus does not exceed the Class B limits or radio noise or digital

apparatus set out in the Radio Inter erence Regulations o the Canadian Department o

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de las classe B prescrites dans le Réglement sur le

brouillage radioélectrique édicté par les ministère des Communications du Canada.

CE STANDARDS

An independent laboratory per ormed testing or compliance to CE requirements. The

unit under test was ound compliant to Class B.

ID TECH is a registered trademark o International Technologies & Systems Corporation.

uSign and Value through Innovation are trademarks o International Technologies &

Systems Corporation.

USB (Universal Serial Bus) Speci ication is Copyright by Compaq Computer Corporation,

Intel Corporation, Microso t Corporation, and NEC Corporation. Windows, Excel, &

Notepad are registered trademarks o Microso t Corporation.

Page 3 o 10

uSign 300 User Manual

LIMITED WARRANTY

ID TECH warrants to the original purchaser or a period o 12 months rom the date o

invoice that this product is in good working order and ree rom de ects in material and

workmanship under normal use and service. ID TECH’s obligation under this warranty is

limited to, at its option, replacing, repairing, or giving credit or any product which has,

within the warranty period, been returned to the actory o origin, transportation charges

and insurance prepaid, and which is, a ter examination, disclosed to ID TECH’s

satis action to be thus de ective. The expense o removal and reinstallation o any item or

items o equipment is not included in this warranty. No person, irm, or corporation is

authorized to assume or ID TECH any other liabilities in connection with the sales o any

product. In no event shall ID TECH be liable or any special, incidental or consequential

damages to purchaser or any third party caused by any de ective item o equipment,

whether that de ect is warranted against or not. Purchaser’s sole and exclusive remedy or

de ective equipment, which does not con orm to the requirements o sales, is to have such

equipment replaced or repaired by ID TECH. For limited warranty service during the

warranty period, please contact ID TECH to obtain a Return Material Authorization

(RMA) number & instructions or returning the product.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE

NO OTHER WARRANTIES OR GUARANTEES, EXPRESS OR IMPLIED, OTHER

THAN THOSE HEREIN STATED. THIS PRODUCT IS SOLD AS IS. IN NO EVENT

SHALL ID TECH BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS

OR IMPLIED WARRANTY OF NEGLIGENCE OF ANY OTHER DAMAGES

WHETHER DIRECT, IMMEDIATE, FORESEEABLE, CONSEQUENTIAL OR

SPECIAL OR FOR ANY EXPENSE INCURRED BY REASON OF THE USE OR

MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT CONFORM

TO THE TERMS AND CONDITIONS OF THE CONTRACT.

The in ormation contained herein is provided to the user as a convenience. While every

e ort has been made to ensure accuracy, ID TECH is not responsible or damages that

might occur because o errors or omissions, including any loss o pro it or other

commercial damage, nor or any in ringements or patents or other rights o third parties

that may result rom its use. The speci ications described herein were current at the time

o publication, but are subject to change at any time without prior notice.

ID TECH is a registered trademark o International Technologies & Systems Corporation. uSign

and Value through Innovation are trademarks o International Technologies & Systems

Corporation.

ID TECH

10721 Walker Street

Cypress, CA 90630

(714) 761-6368

www.idtechproducts.com

Page 4 o 10

uSign 300 User Manual

Revision History

Revision Date Description of Changes By

A 02/28/2012 Initial release JW

Page 5 o 10

uSign 300 User Manual

Table of Contents

1.0 Introduction ..........................................................................................................................6

2.0 Features ................................................................................................................................6

3.0 Model Designations .............................................................................................................7

4.0 Terms & Abbreviations........................................................................................................7

5.0 Installing uSign ....................................................................................................................7

5.1 RS232 Communication Inter ace .................................................................................... 8

5.2 USB Communication Inter ace ....................................................................................... 8

6.0 Speci ications .......................................................................................................................8

6.1 Power requirement .......................................................................................................... 8

6.2 Physical housing uSign 300 ............................................................................................ 8

6.3 LCD screen & Resistive touch pad ................................................................................. 8

6.4 Communication inter ace ................................................................................................ 9

6.5 LED ................................................................................................................................. 9

6.6 Agency Approvals .......................................................................................................... 9

6.7 Electronics MTBF ........................................................................................................... 9

6.8 Electro-Static Discharges (ESD)..................................................................................... 9

6.9 Environmental ................................................................................................................. 9

7.0 Outline Drawing.................................................................................................................10

Page 6 o 10

uSign 300 User Manual

1.0 Introduction

The use o electronically captured signatures has become common or Point o Service

(POS) applications. Electronic signature capture reduces transaction time, eliminates

sorting & sending paper, provides convenient electronic storage & transmission, and gives

legal accountability (non-repudiation) or POS transactions.

uSign™ is an electronic signature capture device with a back lighted graphic LCD display

and touch sensitive screen that is the signature panel. Authors can view their signatures in

real time during the signing process. Signatures are compressed and provided to a Host

system or signature & data storage. The LCD display allows or interactive text, which

supports pen-tap commands and unction selections. The interactive Host operations

allow selections and navigations through transactions with just the stylus.

The LCD & touch sensitive screen are surrounded in a plastic housing. The housing

provides a tethered non-electronic stylus. The stylus is astened to the housing in a way to

allow stylus replacement. A mounting plate secures the uSign housing to a counter top or

other mounting sur ace. An overlay covers and protects the signature area o the uSign

display. The overlay is removable allowing replacement i the signature area becomes

worn rom stylus use. Customer speci ic ront overlay designs are possible as needed by

an application.

The signature pad enclosed in a stylish housing. This uSign is a POS System level

product intended or signature capture at a transaction counter. A convenient palm rest

area below the signature panel provides support during the signing process.

.0 Features

• Electronic signature capture w Bu ered signature capability

• Sampling rate up to 190 dots per second

• Real time signature capture with 5:1 compression

• Raw data output available

• Algorithms to ilter spikes, provide Smoothing, & Calibration algorithms

• Command & response driven operations through an API

• Graphic display o signature during capture

• Display graphics under Host control when not in signature process

• Touch pad dot position matches LCD pixel locations

• Operates with Windows XP, Vista and Windows 7 operating systems

• Replaceable non-active tethered stylus

• Resistive touch pad

• RoHS compliant

Page 7 o 10

uSign 300 User Manual

3.0 Model Designations

uSign 300 IDUB-01x500

The “x” de ines the communication inter ace, 2 = RS232 and 6 = USB

4.0 Terms & Abbreviations

COM Host communication port

HID Human Inter ace Device

Host Personal Computer, Terminal, or similar device

LCD Liquid Crystal Display

LED Light Emitting Diode

mA Milli-Amperes o electrical current

RS232 Serial communications

USB Universal Serial Bus, serial communications

VDC Volts Direct Current

5.0 Installing uSign

uSign is designed or an indoor environment. Locate the uSign where it is convenient to

operate and protected rom heat or direct sunlight. Position the uSign so the signature pad

area is easy to reach and the immediate area is clear or authoring the signature. The

uSign housing has threaded inserts in the bottom and relie areas or hook & loop

asteners. A metal mounting bracket with keyhole & screw mounting is mounted to the

back o the housing.

The uSign 300 with an RS232 inter ace uses a standard DE9 connector and uses a 5VDC

power adaptor. The input voltage on the power adaptors may be limited; do not exceed

the input voltage rating o the power adaptor. Connect the power adaptor a ter the other

connections are made.

The uSign having a USB communication inter ace receives power rom the host through

the USB port.

For both inter ace types and when power is applied, the green & red LED on the uSign are

on or a moment, go o , and then the green is on and lashing. I the LED does not light,

check the connections and the availability o power rom the power outlet. With the green

LED lashing, the LCD screen displays: “IDTECH uSign, Version x.xx.” When the

signature screen is touched or commands are received rom a Host, the LED is turned o

and the screen is cleared or Host operations. The Green LED is controlled and is on

when uSign is in the capture mode; the red LED is host controlled.

The communication type can be RS232 or USB-HID. See the Communication Inter ace

section below that corresponds with the inter ace o your uSign unit. A Technical

Re erence manual or the native uSign protocol is available rom the actory.

Page 8 o 10

uSign 300 User Manual

5.1 RS 3 Communication Interface

The uSign has a communication cable with a DB25 (100 Model) or DB-9 (200 Model)

connector that its the computer serial (RS232) COM port connection. See the

Speci ications, Inter ace Section or COM port settings.

Connect the RS232 connector to the PC and insure it is ully seated into the connector.

Connect the power adaptor output to the power input socket on the back o the DB

connector shell. Connect the power adaptor to the AC line power outlet.

5. USB Communication Interface

The USB inter ace is a HID Class. The USB communication uses the Windows OS

installed HID driver. uSign receives power orm the Host USB connection.

Connect the USB connector to the PC and insure it is ully seated into the jack. I the

LEDs do not light, check the connections and the availability o power rom the Host.

6.0 Specifications

6.1 Power requirement

Voltage 5VDC

Current 150mA typical

RS232 Power AC adapter, center positive adaptor plug output

USB Power Host USB port

6. Physical housing uSign 300

Overall size 129mm wide (5.1 in)

146mm length (5.75 in)

40mm thick including back plate (1.57 in)

Display 3.5-inch diagonal signature area

6.3 LCD screen & Resistive touch pad

Touchpad Resistive, transparent, pressure-sensitive screen

Sampling Rate Up to 118 samples per second

Touchpad Resolution Up to 1024 dpi

Display Resolution LCD Resolution: 320 x 240 dots

Page 9 o 10

uSign 300 User Manual

6.4 Communication interface

RS 3

Baud rates 1200 to 115200

De ault 9600 baud, data bits – 8, Parity – none, Stop bit – 1

USB 2.0 Full Speed (HID)

6.5 LED

Two individual LEDs (green & red)

Signature Pad or Host controlled

6.6 Agency Approvals

FCC Class B, & CE,

The product is RoHS compliant.

6.7 Electronics MTBF

Electronics MTBF 200,000 POH, based on Bellcore standard.

6.8 Electro-Static Discharges (ESD)

The electronics survive ESD o 4kV contact, and 8kV air discharge. Meets or exceeds

IEC 1000-4-2.

6.9 Environmental

Temperature ranges

Operating 1 to 45 C (34 to 113 F)

Storage (sealed container) -10 to 70 C (14 to 158 F)

Relative humidity

10% to 95% non-condensing

Page 10 o 10

uSign 300 User Manual

7.0 Outline Drawing

Figure 1 Outline Drawing or uSign 300

Inhaltsverzeichnis

Andere IDTECH Steuereinheit Handbücher

IDTECH

IDTECH SecureHead Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

IDTECH uSign 300 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken