IEI Technology EPIC-NANO Series Bedienungsanleitung
IEI Technology Corp.
EBC-2100
EPIC-NANO Series Embedded Board Chassis
Quick Installation Guide
Version 1.1 January 19, 2006
Packing Content
A. Chassis x 1 pcs B.QIG C.Screws
D.Wall Mounting Kits E. Rubber Foot Pad F. Power Adapter with Power Cord
EBC-2100
IEI Technology Corp.
Page 2
Product Dimensions
Product Specification
Cover/Base AL 3.2mm / 1.0mmMaterial &
Thickness Brackets SECC 2.0mm
Support IEI EPIC-NANO
Embedded Board
NANO-7240 series
NANO-7270G series
NANO-7270-600 series
NANO-7270-PM733 series
I/O Interface COM x(1 + 2), VGAx1, LANx1, CFx1, PS/2x1, USBx4,
Audiox4, LPTx1, Power Switchx1, Power Jack x 1
Internal Drive Bay 2.5” HDD
Color Pantone Gray 7C
Expansion Slots Support PC/104 or PC/104+ module space
Operating 3G acceleration peak to peak (11ms)Shock
Non-Operating 10G acceleration peak to peak (11ms)
Operating 10~57Hz, 0.006” double amplitude displacement
57~500Hz, 1.0G acceleration peak to peak
Vibration
Non-operating 5~17Hz, 0.1” double amplitude displacement
17~640Hz, 1.5G acceleration peak to peak
Chassis Dimension D134xW262xH56 mm D5.27”xW10.3”xH2.2”
Net Weight / Gross Weight
1 / 3 (kg) 2.1 / 6.3 (lb)
CFM / CUFT 2.986CFM 0.6329cuft
EBC-2100
IEI Technology Corp.
Page 3
Optional Peripherals
A.1 Optional Socket type CPU Heatsink Module (P/N: 34000-000060-RS)
AL+CU Heatsink with screws
A.2 Optional Cooling Fan Module (P/N: 19100-000027-RS)
40x40x10mm, +12V ball bearing Fan; 3 Pin; 6000RPM with screws
A.3 Optional IDE cable (P/N: 32200-000037-RS)
44pin IDE cable for 2.5” HDD
A.1 A.2 A.3
Recommendation of System cooling Components
□recommended ■must-have
Board Model Code CPU Board Companion
Heatsink
Heatsink
34000-000060-RS
System fan
19100-000027-RS
NANO-7240-400
-R10
ULV Intel Celeron
400MHz ■□
NANO-7270G-R11 Socket 479 base
Pentium M/ Celeron M
CPU up to 1.8GHz#1
■■
NANO-7270-600-R11
■□
NANO-7270-600Z-R11
ULV Intel Celeron M
600MHz ■
#1 Operation Temperature: 0℃~ 40℃
Installing NANO-7270G-R11 with Pentium M 2.0GHz CPU into
EBC-2100 is not recommended due to thermal issue.
IEI Technology Corp.
Hardware Installation
The following procedures demonstrate the installation of EBC-2100. Please read
the precautions carefully before installing it.
Precautions
1. Always disconnect the unit from the power outlet whenever installing
or fixing a component inside the chassis.
2. If possible, always wear a grounded wrist strap when installing or
fixing a component inside the chassis.
3. Hold electronic circuit boards (EPIC-NANO board) by the edges only.
Do not touch the components on the board unless it is necessary.
4. Use the correct screws and never overly tighten them.
5. Keep the whole set original package in case the unit has to be
returned.
Step 1
Remove eight screws from the cover by screwdrivers.
Step 2
Remove the plastic shield inside the chassis.
Step 3
EBC-2100
IEI Technology Corp.
Page 5
If additional hard drive storage is required, simply remove the HDD bracket from the chassis.
Then connect the hard drive to the HDD bracket, plug the HDD cable to the hard drive, and
assemble the HDD bracket with HDD back into the chassis. The connector of the hard drive
should be at the opposite side of the power switch after installation.
Step 4
An optional 40mm cooling fan can accommodate in EBC-2100. The arrow sign on the
cooling fan indicates the direction of airflow and it should point outside the chassis.
HDD bracket
Power switch
EBC-2100
IEI Technology Corp.
Page 6
Step 5
Before installing CPU board into the chassis, CPU, Memory, heatsink and CPU cooling fan
must be secured properly onto the CPU board. To prevent heatsink deformation, please
handle the heatsink diagonally.
Step 6
Unscrew the COM port/VGAport with proper tool.
Step 7
Align the motherboard with the chassis standoffs, secure with screws for motherboard and
COM port and VGAport.
Step 8
Align the power cable into the embedded board.
EBC-2100
IEI Technology Corp.
Page 7
Step 9
Place the cover back on the top of the case and secure with screws.
Step 10
If wall mounting is required, secure the wall mounting kits to the bottom of the chassis with
screws. For desktop usage please apply the rubber foot pads to the bottom of the chassis.
Step 11
When replacing the system memory, simply remove the screws on the bottom cover then
insert the memory to the memory slot. Then place the cover back on the chassis and secure
with screws.
EBC-2100
IEI Technology Corp.
Page 8
Contact Information
IEI Technology Corp.
TEL : 886-2-86916798
FAX : 886-2-66160029
Email: [email protected]
Website:http://www.ieiworld.com
Address: No. 29, Jhongsing Rd.,Sijhih City,Taipei County, 221, Taiwan
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere IEI Technology Chassis Handbücher
IEI Technology
IEI Technology PAC-400AI Bedienungsanleitung
IEI Technology
IEI Technology EBC-3620 Bedienungsanleitung
IEI Technology
IEI Technology BRICK Series Bedienungsanleitung
IEI Technology
IEI Technology RACK-360 Bedienungsanleitung
IEI Technology
IEI Technology RACK-3200G Bedienungsanleitung
IEI Technology
IEI Technology ECA-200 Bedienungsanleitung
IEI Technology
IEI Technology PAC-125G Bedienungsanleitung
IEI Technology
IEI Technology RACK-360G Bedienungsanleitung
IEI Technology
IEI Technology PAC-1000G Bedienungsanleitung
IEI Technology
IEI Technology PAC-1700G Bedienungsanleitung
