IEI Technology ISDM-084G Bedienungsanleitung

ISDM Series Industrial Monitor

Page 1

IEI Technology Corp.

User Manual

ISDM Series Industrial Monitor User Manual

MODEL:

ISDM Series

Stainless Steel Industrial Monitor, RoHS Compliance

IP 65 Protection, Touch Screen, 9-36V DC Input, VGA/DVI-D

Rev. 1.13 – 16 July, 2009

ISDM Series Industrial Monitor

Page 2

Revision

Date Version

Changes

16 July, 2009 1.13 Update “Chapter 6: OSD Controls”

April, 2008 1.12 1. Added ISDM-121GX models information

2. Added the smartOSD appendix

May, 2007 1.11 AV-5300 AD Board CN25 connector pin 3 voltage changed to

+9V~+36V input

April, 2007 1.10 Updated Figure 1-3 and Section 4.3 for AV-5300 AD Board V2.0

October, 2006 1.00 Initial Release

ISDM Series Industrial Monitor

Page 3

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

All registered trademarks and product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

ISDM Series Industrial Monitor

Page 4

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “WARNING,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the ISDM Series or

personal injury to the user. Please take warning messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the ISDM Series. Cautions are easy to recognize. The word “caution” is written

as “CAUTION,” both capitalized and bold and is followed. The italicized text is the

cautionary message. A caution message is shown below:

ISDM Series Industrial Monitor

Page 5

CAUTION:

This is an example of a caution message. Failure to adhere to cautions

messages may result in permanent damage to the ISDM Series.

Please take caution messages seriously.

NOTE:

These messages inform the reader of essential but non-critical information. These

messages should be read carefully as any directions or instructions contained therein can

help avoid making mistakes. Notes are easy to recognize. The word “note” is written as

“NOTE,” both capitalized and bold and is followed by text. The text is the cautionary

message. A note message is shown below:

NOTE:

This is an example of a note message. Notes should always be read.

Notes contain critical information about the ISDM Series. Please take

note messages seriously.

ISDM Series Industrial Monitor

Page 6

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the ISDM Series from or contact an IEI sales

representative directly. To contact an IEI sales representative, please

send an email to [email protected].

The items listed below should all be included in the ISDM Series package.

1 x ISDM-190/170/150/121/104/84 series industrial monitor.

1 x AC Power cable

1 x VGA Cable

1 x 45W AC Power Adapter (ISDM-190 / 170 / 150 / 121)

1 x 25W AC Power Adapter (ISDM-104 / 84)

5 x Replacement Round Head Screw

5 x Replacement Flat Head Screw

5 x Replacement Wire Strain Band

1 x User Manual on CDROM

1 x Power Cable for Terminal Block (Optional for M model)

1 x Touch Panel RS-232 Cable / Touch Pen / Driver CDROM (for T-R model)

1 x Touch Panel USB Cable / Touch Pen / Driver CDROM (for USB/T-R

model)

Images of the above items are shown in Chapter 5.

ISDM Series Industrial Monitor

Page 7

Table of Contents

1INTRODUCTION................................................................................................... 18

1.1 ISDM SERIES INDUSTRIAL MONITOR OVERVIEW..................................................... 19

1.1.1 Standard Features............................................................................................ 19

1.1.2 Model Variations.............................................................................................. 19

1.1.3 Base Model Variants ........................................................................................ 20

1.2APPLICATIONS AND FEATURES.................................................................................. 20

1.2.1 ISDM Series Industrial Monitor Applications................................................. 20

1.2.2 ISDM Series Industrial Monitor Features ....................................................... 21

1.3 EXTERNAL OVERVIEW.............................................................................................. 21

1.3.1 Front View........................................................................................................ 22

1.3.2 Bottom Panel View........................................................................................... 22

1.3.3 AD Board ......................................................................................................... 23

1.4 SERIES SPECIFICATIONS............................................................................................ 23

1.5 CERTIFICATIONS....................................................................................................... 25

2MECHANICAL OVERVIEW............................................................................... 26

2.1 INTRODUCTION......................................................................................................... 27

2.2 FRONT PANEL........................................................................................................... 27

2.3 REAR PANEL............................................................................................................. 27

2.4 BOTTOM PANEL........................................................................................................ 28

2.4.1 Available Connectors....................................................................................... 28

2.4.2 ISDM-084 Connectors..................................................................................... 28

2.4.3 ISDM-104 Connectors..................................................................................... 29

2.4.4 ISDM-121 Connectors..................................................................................... 29

2.4.5 ISDM-150 Connectors..................................................................................... 29

2.4.6 ISDM-170 Connectors..................................................................................... 30

2.4.7 ISDM-190 Connectors..................................................................................... 30

2.5 PHYSICAL DIMENSIONS............................................................................................ 31

2.5.1 General Physical Dimensions.......................................................................... 31

2.5.2 ISDM-190 Physical Dimensions...................................................................... 31

2.5.3 ISDM-170 Physical Dimensions...................................................................... 33

ISDM Series Industrial Monitor

Page 8

2.5.4 ISDM-150 Physical Dimensions...................................................................... 34

2.5.5 ISDM-121 Physical Dimensions...................................................................... 35

2.5.6 ISDM-104 Physical Dimensions...................................................................... 36

2.5.7 ISDM-084 Physical Dimensions...................................................................... 37

2.6 OPTIONAL MOUNTING KITS ..................................................................................... 38

2.6.1 ISDM-084 Mounting Kits................................................................................. 38

2.6.2 ISDM-104 Mounting Kits................................................................................. 38

2.6.3 ISDM-121 Mounting Kits................................................................................. 38

2.6.4 ISDM-150 Mounting Kits................................................................................. 39

2.6.5 ISDM-170 Mounting Kits................................................................................. 39

2.6.6 ISDM-190 Mounting Kits................................................................................. 39

2.7 MOUNTING OPTIONS................................................................................................ 40

2.7.1 Panel Mounting................................................................................................ 40

2.7.2 Wall Mounting.................................................................................................. 41

2.7.3 Monitor Arm or Stand Mounting...................................................................... 42

3LCD AND TOUCH PANEL SPECIFICATIONS ................................................ 44

3.1 LCD SPECIFICATIONS............................................................................................... 45

3.1.1 LCD Overview ................................................................................................. 45

3.1.2 ISDM-190 LCD Specifications ........................................................................ 46

3.1.3 ISDM-170 LCD Specifications ........................................................................ 47

3.1.4 ISDM-150 LCD Specifications ........................................................................ 48

3.1.5 ISDM-121 LCD Specifications ........................................................................ 49

3.1.6 ISDM-104 LCD Specifications ........................................................................ 50

3.1.7 ISDM-084 LCD Specifications ........................................................................ 51

3.2 TOUCH PANELS......................................................................................................... 52

3.2.1 Touch Panel Models......................................................................................... 52

3.2.2 Touch Panel Dimensions.................................................................................. 53

3.2.3 Touch Panel Specifications .............................................................................. 54

3.2.4 Touch Panel RS-232 Controller Specifications................................................ 55

3.2.5 Touch Panel USB Controller Specifications.................................................... 56

3.3 POWER ADAPTERS.................................................................................................... 57

4AD BOARDS........................................................................................................... 58

4.1AD BOARD OVERVIEW............................................................................................. 59

ISDM Series Industrial Monitor

Page 9

4.2AV-5350AD BOARD................................................................................................ 59

4.2.1 AV-5350 AD Board Overview .......................................................................... 59

4.2.2 AV-5350 AD Board Connectors ....................................................................... 59

4.2.3 AV-5350 AD Board Layout............................................................................... 60

4.2.4 AV-5350 Peripheral Interface Connectors....................................................... 61

4.2.5 AV-5350 Rear Panel Connectors ..................................................................... 61

4.2.6 AV-5350 On-board Jumper .............................................................................. 62

4.2.7 AV-5350 Internal Peripheral Connectors ........................................................ 62

4.2.8 5V Power Connector........................................................................................ 62

4.2.9 Backlight Inverter Connector .......................................................................... 63

4.2.10 External OSD and LED Indication Connector.............................................. 64

4.2.11 LVDS Output Connector ................................................................................ 66

4.2.12 VGA Connector.............................................................................................. 67

4.2.13 AV-5350 External (Rear Panel) Connectors.................................................. 68

4.2.14 DC 12V Connector......................................................................................... 69

4.2.15 VGA Connector.............................................................................................. 69

4.2.16 AV-5350 On-board Jumper............................................................................ 70

4.2.17 LCD Panel Voltage Select Jumper................................................................. 71

4.3AV-5300AD BOARD OVERVIEW.............................................................................. 72

4.3.1 AV-5300 AD Board Connectors ....................................................................... 73

4.3.2 AV-5300 AD Board Layout............................................................................... 74

4.3.3 AV-5300 Peripheral Interface Connectors....................................................... 75

4.3.4 AV-5300 Rear Panel Connectors ..................................................................... 75

4.3.5 AV-5300 On-board Jumpers............................................................................. 76

4.3.6 AV-5300 Internal Peripheral Connectors ........................................................ 76

4.3.7 Auto-Dimming Connector................................................................................ 76

4.3.8 Debug Port Connector..................................................................................... 77

4.3.9 External OSD and LED Indication Connector................................................ 78

4.3.10 Backlight Inverter Connector ........................................................................ 79

4.3.11 LVDS Output Connector ................................................................................ 80

4.3.12 Power Output Connector............................................................................... 81

4.3.13 Power Input Connector.................................................................................. 82

4.3.14 VGA Connector.............................................................................................. 84

4.3.15 AV-5300 On-board Jumpers........................................................................... 85

4.3.16 LCD Panel Power Input Jumper.................................................................... 86

ISDM Series Industrial Monitor

Page 10

4.3.17 LCD Panel Voltage Select Jumper................................................................. 86

4.3.18 AV-5300 External (Rear Panel) Connectors.................................................. 87

4.3.19 DC 12V Connector......................................................................................... 87

4.3.20 VGA Connector.............................................................................................. 88

4.3.21 DVI-D Connector........................................................................................... 89

5INSTALLATION .................................................................................................... 91

5.1 INSTALLATION PRECAUTIONS................................................................................... 92

5.2 UNPACKING.............................................................................................................. 93

5.2.1 Packaging ........................................................................................................ 93

5.2.2 Unpacking Procedure ...................................................................................... 93

5.2.3 Packing List ..................................................................................................... 94

5.3 PRE-INSTALLATION PREPARATION ............................................................................ 94

5.3.1 Tools................................................................................................................. 94

5.3.2 Voltage Select Jumper Settings ........................................................................ 95

5.4 CONNECTORS ........................................................................................................... 96

5.4.1 Rear Panel Connectors Overview.................................................................... 97

5.4.2 VGA Connector................................................................................................ 97

5.4.3 DVI-D Connector............................................................................................. 98

5.4.4 12V Power Connector...................................................................................... 98

5.4.5 Optional DC Power Connector ....................................................................... 99

5.4.6 Optional RS-232 Touch Panel Connector........................................................ 99

5.4.7 Optional USB Touch Panel Connector .......................................................... 100

5.5 MOUNTING THE ISDM SERIES INDUSTRIAL MONITOR ........................................... 101

5.5.1 Panel Mounting.............................................................................................. 101

5.5.1.1 Standard Panel Mounting........................................................................ 101

5.5.2 Wall Mounting................................................................................................ 104

5.5.3 Monitor Stand Installation............................................................................. 106

5.5.4 Monitor Arm Installation............................................................................... 107

6ON-SCREEN-DISPLAY (OSD) CONTROLS ................................................... 109

6.1 USER MODE OSD STRUCTURE................................................................................110

6.1.1 OSD Buttons....................................................................................................110

6.1.2 OSD Menu Structure.......................................................................................111

6.2 USING THE OSD......................................................................................................112

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IEI Technology Industriemonitor Handbücher

IEI Technology

IEI Technology LCD-KIT150G Bedienungsanleitung

Beliebte Industriemonitor Handbücher anderer Marken

JUMO

JUMO mTRON T Bedienungsanleitung

SWEDX

SWEDX SWSS156 Bedienungsanleitung

Saia

Saia PCD7.D410VTCF Bedienungsanleitung

weintek

weintek EasyView MT-608S Bedienungsanleitung

Advantech

Advantech FPM-212 Series Bedienungsanleitung

Advantech

Advantech FPM-3191G Series Bedienungsanleitung

Austin Hughes

Austin Hughes RP-F821 Bedienungsanleitung

WAGO

WAGO WAGO-PERSPECTO 762 Series Produkthandbuch

HIS

HIS HIS-ML12-Series D Bedienungsanleitung

Advantech

Advantech IDS-3319 Series Bedienungsanleitung

Acnodes

Acnodes APH 8064 Bedienungsanleitung

Acnodes

Acnodes APW 5400 Bedienungsanleitung

Dynamic Displays

Dynamic Displays QES1500 Progressive Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK Dk3g4PANEL 6153-O/P Bedienungsanleitung

ESA

ESA XM7W7 Bedienungsanleitung

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Bedienungsanleitung

Siemens

Siemens INOX PRO SIMATIC IFP1900 Administratorhandbuch

Advantech

Advantech IDK-1115WP-45FHA1 Bedienungsanleitung