IFM Electronic dn1030 Bedienungsanleitung

Installation instructions
AC/DC power supplies
single phase
Power Supply
DN1030
DN1031
7390798 / 00 08 / 2011
UK

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������3
1�1 Notes on this document���������������������������������������������������������������������������������3
1�2 Symbols used ������������������������������������������������������������������������������������������������3
1�3 Warning signs used ���������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������4
2�1 General����������������������������������������������������������������������������������������������������������4
2�2 Installation and connection ����������������������������������������������������������������������������4
2�3 Tampering with the device �����������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������4
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation position of the device�������������������������������������������������������������������5
4�2 Place device onto the DIN rail �����������������������������������������������������������������������6
4�3 Remove the device����������������������������������������������������������������������������������������6
5 Electrical connection��������������������������������������������������������������������������������������������7
5�1 Using the spring terminals �����������������������������������������������������������������������������7
5�2 Core cross sections ���������������������������������������������������������������������������������������8
5�3 DC OK output ������������������������������������������������������������������������������������������������8
5�3�1 Switching characteristics ����������������������������������������������������������������������8
5�4 External fuse��������������������������������������������������������������������������������������������������9
5�5 Parallel connection ����������������������������������������������������������������������������������������9
6 Operating and display elements ������������������������������������������������������������������������10
6�1 LED states ���������������������������������������������������������������������������������������������������10
7 Operation�����������������������������������������������������������������������������������������������������������10
8 Technical data���������������������������������������������������������������������������������������������������� 11
8�1 Data sheets ������������������������������������������������������������������������������������������������� 11
9 Maintenance, repair and disposal���������������������������������������������������������������������� 11
10 Approvals/standards ���������������������������������������������������������������������������������������� 11

3
UK
1 Preliminary note
1.1 Notes on this document
This document applies to devices of the type "power supply" (art� no�: DN103x)�
It is part of the device and contains information about the correct handling of the
product�
This document is intended for qualified electricians� These specialists are people
who are qualified by their training and their experience to see and to avoid
possible hazards that may be caused during operation of the device�
►Read this document before using the device�
►Keep this document during the service life of the device�
1.2 Symbols used
►Instructions
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→Cross-reference
Important note
Non-compliance can result in malfunction or interference�
Information
Supplementary note
1.3 Warning signs used
WARNING
Warning of serious personal injury�
Death or serious irreversible injuries may result�
CAUTION
Warning of personal injury�
Slight reversible injuries may result�
NOTE
Warning of damage to property�

4
2 Safety instructions
2.1 General
►Observe these operating instructions�
►Adhere to the warning notes on the product�
Non-observance of the instructions, operation which is not in accordance with use
as prescribed below, wrong installation or incorrect handling can affect the safety
of operators and machinery�
2.2 Installation and connection
The device must only be installed, connected and put into operation by a qualified
electrician as the safe function of the device and machinery is only guaranteed
when installation is correctly carried out�
The installation and connection must comply with the applicable national and
international standards� Responsibility lies with the person installing the device�
2.3 Tampering with the device
Tampering with the device is not allowed and will lead to an exclusion of liability
and warranty� Tampering with the device can affect the safety of operators and
machinery�
►Do not open the device�
►Do not insert any objects into the device�
►Prevent metal foreign bodies from penetrating�
3 Functions and features
● The device is used for the regulated 24VDC voltage supply of industrial
controllers, sensors, actuators or measuring systems�
● It is intended for installation in a dry, closed environment (e�g� control cabinet)�
►Observe the connection values and the permissible environmental conditions
→devicelabelordatasheet.
WARNING
Do not use the device in applications where a malfunction of the device presents
a danger to people�

5
UK
4 Installation
4.1 Installation position of the device
1: DC output voltage top
2: AC input voltage bottom
3: Convection cooling
A: Free space for convection cooling
►Install the DIN rail for receiving the device horizontally�
► Keeptotheclearspaceforconvectioncooling(→datasheet).

6
4.2 Place device onto the DIN rail
1� Angle the device and hook it onto the upper edge of the DIN rail�
2� Push the device downwards and press to lock�
> The device audibly clips into place�
4.3 Remove the device
1� Pull the locking clip downwards using a screwdriver�
2� Lift the device and remove it from the DIN rail�

7
UK
5 Electrical connection
WARNING
Dangerous contact voltages� Electric shock possible in the case of contact�
►Disconnect the system from power before working with it�
►Protect the system against unintentional switch-on�
►Select the correct connecting cables for the load and the environmental
conditions�
►Use wire end ferrules for flexible connection wires�
►Connect the device according to the wiring arrangement�
Wiring→devicelabelordatasheet.
5.1 Using the spring terminals
1: Rectangular recess for locating the screwdriver
Blade width: max� 3 mm
2: Terminal opening
►Push the screwdriver gently into the rectangular recess (1)�
> The spring terminal is opened by the pressure�
►Insert the wire into the round terminal opening (2)�
►Remove the screwdriver�
> The spring terminal is closed� The wire is tightly clamped�

8
5.2 Core cross sections
Type of wire Max� core cross-section AWG
massive 1�5 mm² 16
flexible 1�5 mm² (with wire end ferrule) −
5.3 DC OK output
The DC OK output is a semiconductor output� It is used for switching signalling
and control devices�
ConnectionvaluesDCOKoutput→datasheet
5.3.1 Switching characteristics
DC OK output Operating mode DC output voltage
switched
(conducting) normal operation > 20 V
open
(not conducting)
overload
< 20 V
short circuit
overvoltage (external)
AC input voltage missing
internal device error

9
UK
5.4 External fuse
► ProtecttheACinputvoltagebymeansofcircuit-breakers(fuserate→device
label or data sheet)�
►Observe the national regulations�
5.5 Parallel connection
DN103x
DN103x
Block diagram
Connect maximum 2 units with the same article no� in parallel (e�g� 2 x
DN1030 or 2 x DN1031)�
The DC output voltages of the devices have to be identical�
►Check the DC output voltage of the devices using a voltmeter and adapt it by
meansofthepotentiometer(→6Operatinganddisplayelements).
WARNING
Caution during operation when switched on� Due to protection rating IP 20
contact with dangerous contact voltages is possible�
►The device must only be operated by a qualified electrician�

10
6 Operating and display elements
1: LED DC OK (green)
2: Potentiometer 24���28 V DC output voltage
3: Locking clip
6.1 LED states
DC OK (green) Operating mode DC output voltage
On normal operation > 20 V
Off
overload
< 20 V
short circuit
overvoltage (external)
AC input voltage missing
internal device error
7 Operation
CAUTION
Due to the internal heating there may be perceptible hot temperatures on the
device surface� Can cause burns�
►Do not touch the device during operation or immediately after it has been
switched off�
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere IFM Electronic Stromversorgung Handbücher

IFM Electronic
IFM Electronic ecomat200 DN301 Series Bedienungsanleitung

IFM Electronic
IFM Electronic E84016 Bedienungsanleitung

IFM Electronic
IFM Electronic DN1023 Bedienungsanleitung

IFM Electronic
IFM Electronic DN4033 Bedienungsanleitung

IFM Electronic
IFM Electronic AS-Interface AC1254 Bedienungsanleitung

















