IFM DTE830 Bedienungsanleitung

Operating instructions
RFID UHF reader
DTE830
DTE930
80280541 / 01 01 / 2020
UK

RFID UHF reader
2
Contents
1 Preliminary note � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
1�1 Symbols used� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
1�2 Warnings used � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
1�3 Copyright and trademarks � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
2 Safety instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
3 Functions and features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
4 Radiated electromagnetic field strength � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
4�1 CE marking� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
4�1�1 FCC labelling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
4�1�2 ISED Canada Regulatory Information � � � � � � � � � � � � � � � � � � � � � � � � 6
4�1�3 ISED RF Radiation Exposure Statement � � � � � � � � � � � � � � � � � � � � � � 6
4�1�4 C-Tick requirements� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
5 Items supplied� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
6 Installation� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
6�1 Install device� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
6�2 Eliminate radio disturbance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
7 Electrical connection� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
7�1 Wiring � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
7�2 Power supply � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
7�3 Ethernet connection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
7�4 Digital inputs and outputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11
7�4�1 Digital inputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11
7�4�2 Digital outputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
7�5 Antenna connection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
8 Operating and display elements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
8�1 LED PWR � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
8�2 LEDs 1 / 2 / 3 / 4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
8�3 Audio signalling device � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
9 Configuration � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
10 Maintenance, repair and disposal� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15

UK
RFID UHF reader
3
1 Preliminary note
Technical data, approvals, accessories and further information →
www�ifm�com�
1.1 Symbols used
►Instructions
>Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
1.2 Warnings used
ATTENTION!
Warning of damage to property
1.3 Copyright and trademarks
© All rights reserved by ifm electronic gmbh� No part of these instructions may be
reproduced and used without the consent of ifm electronic gmbh�
All product names, pictures, companies or other brands used on our pages are the
property of the respective rights owners�

RFID UHF reader
4
2 Safety instructions
●The device described is a subcomponent for integration into a system�
– The manufacturer is responsible for the safety of the system�
– The system manufacturer undertakes to perform a risk assessment
and to create a documentation in accordance with legal and normative
requirements to be provided to the operator and user of the system�
This documentation must contain all necessary information and safety
instructions for the operator, the user and, if applicable, for any service
personnel authorised by the manufacturer of the system�
●Read this document before setting up the product and keep it during the entire
service life�
●The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
● Use the product for its intended purpose (→ 3 Functions and features).
●If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
●The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
●Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
●Protect units and cables against damage�
3 Functions and features
The multiprotocol-capable RFID reader DTE830 / DTE930 reads active and
passive ID tags in different frequency ranges:
●Europe: 865 - 868 MHz
●USA: 902 - 928 MHz
●Australia: 916 - 927 MHz
On delivery the device can read and write ID tags according to the EPC Gen2
standard� Further protocols can be imported via software updates�
The device communicates with the ID tags via transmitting and receiving antennas
which are connected to the max� 4 antenna connections�
The device is designed for indoor use�
Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable for
use in domestic areas�

UK
RFID UHF reader
5
The device may only be used under the operating conditions specified in the
data sheet�
4 Radiated electromagnetic field strength
4.1 CE marking
The device complies with the requirements to CE�
Brand name: ifm electronic DTE830 RFID UHF reader for Europe
The device is designed for operation in accordance with EN 302208� When
operating the device with connected antennas, observe the human exposure
regulations to EN 50364� Ensure a minimum distance of 23 cm between antenna
and people� During operation, cardiac pacemakers may be impaired� In case of
doubt, persons concerned should consult the manufacturer of the pacemaker or
the attending doctor�
The output power of the device can be reduced depending on the antenna cable
length and the antenna gain�
4.1.1 FCC labelling
The device complies with the requirements to FCC Part 15�
Brand name: ifm electronic DTE930 RFID UHF reader for US (FCC)
The device is designed for operation in accordance with FCC Part 15�
This device complies with part 15 of the FCC Rules� Operation is subject to
the following two conditions:
●This device may not cause harmful interference�
●This device must accept any interference received including interference
that may cause undesired operation�
The device complies with the FCC limits for radiation exposure in a non-controlled
environment: Ensure a minimum distance of 23 cm between antenna and people�
In order to comply with the regulations of FCC Part 15 in the United States, the
system must be professionally installed� The operator and the installer have to
ensure that only systems certified in the United States are used�

RFID UHF reader
6
4.1.2 ISED Canada Regulatory Information
This device complies with ISED RSS standard(s) (Radio Standards Specifications)
for licence-exempt radio apparatus� Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received including interference that may cause
undesired operation�
Under ISED regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by ISED.
►To reduce potential radio interference to other users, choose the antenna type
and its gain such that the equivalent isotropically radiated power (EIRP) is not
more than that necessary for successful communication�
This radio transmitter has been approved by ISED to operate with the antenna
types listed as accessories, with the maximum permissible gain and required
antenna impedance for each antenna type indicated�
4.1.3 ISED RF Radiation Exposure Statement
This equipment complies with ISED RSS-102 radiation exposure limits set forth for
an uncontrolled environment�
►Make sure this equipment is installed and operated with a minimum distance of
34 centimetres between the radiator and your body�
4.1.4 C-Tick requirements
The device complies with the requirements to C-Tick�
Brand name: ifm electronic DTE930 RFID UHF reader for Australia
5 Items supplied
●Device
●Grounding material
The device is supplied without installation and connection accessories�
Matching accessories at www�ifm�com

UK
RFID UHF reader
7
6 Installation
85100
100
140
100
170
M6
Fig� 1: Installation
6.1 Install device
►Observe the operating conditions specified in the data sheet�
►Install the device via the mounting holes�
►Use strain reliefs for cables connected to the device�
The device complies with the protection rating IP67 if unused connections are
covered�
The device is supplied without installation and connection accessories�
Matching accessories at www�ifm�com

RFID UHF reader
8
6.2 Eliminate radio disturbance
The device usually operates without any interference caused by radio
communication, provided it is
● used as intended (→ 3 Functions and features),
● correctly installed (→ 6 Installation).
The operation free of radio disturbance cannot be guaranteed for each
application�
If the device causes radio disturbance in an application, the following instructions
will help:
►Realign the receiving antenna�
►Change the position of the receiving antenna�
►Increase the distance between the device and the antenna�
►Change the power supply of the device�
> If the device and the antenna use the same circuit, radio disturbance may
occur�
►Contact the support of the manufacturer�

UK
RFID UHF reader
9
7 Electrical connection
Observe the following instructions before electrical installation�
ATTENTION!
The device must be connected by a qualified electrician� Observe the electrical
data in the data sheet�
Device of protection class III (PC III).
The electrical supply must only be made via PELV circuits�
For cable lengths > 30 m use an additional protection against surge voltages to
IEC 6100-4-5�
Disconnect power before connecting the device�
7.1 Wiring
1 2 3 4 5 6 7
Fig� 2: Wiring
①antenna terminals 4, R-TNC 50 Ω
②antenna terminals 3, R-TNC 50 Ω
③antenna terminals 2, R-TNC 50 Ω
④antenna terminals 1, R-TNC 50 Ω
⑤GPIO connection, M12 socket, 12 poles, A-coded
⑥power supply connection, M12 connector, 4 poles, A-coded
⑦LAN connection with PoE Plus (Power over Ethernet), M12 socket, 8 poles,
X-coded

RFID UHF reader
10
7.2 Power supply
The power supply is designed as a 4-pole M12 round connector with A-coding�
4
21
3
Pin Connection
1 + 24 V DC
2
3 GND
4
Only use power supplies with limited power for operation: The power supply
must be below 100 W on the secondary side�
7.3 Ethernet connection
The Ethernet connection is provided as an 8-pole M12 socket with X coding�
Original Scale Drawing (MTD)
EPS Source
Frame Size: 15 mm x 15 mm
PIN_0213
50% 200%
1
54
7
8
36
2
1
54
7
8
36
2
Pin Connection
1 TD + PoE+ 1
2 TD - PoE+ 1
3 RD + PoE+ 2
4 RD - PoE+ 2
5 PoE+ 1
6 PoE+ 1
7 PoE+ 2
8 PoE+ 2
Only use screened cables for Ethernet connection!
Andere Handbücher für DTE830
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere IFM Kartenleser Handbücher
Beliebte Kartenleser Handbücher anderer Marken

Rosslare
Rosslare DR-6255 Bedienungsanleitung

Lindy
Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler
Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls
Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS
ACS ACR122L Bedienungsanleitung

Secukey
Secukey S2-MF Bedienungsanleitung












