ifs POE201-EX Bedienungsanleitung
IFS POE201-EX POE Extender
User Manual
P/N 1076526 • REV A • ISS 08FEB12
Copyright © 2012 UTC Fire & Security Company. All rights
reserved.
Trademarks and
patents
Interlogix, IFS POE201-EX POE Extender, the IFS
Brand and logo are trademarks of
UTC Fire & Security.
Other trade names used in this document may be
trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Manufacture
r
UTC Fire & Security Americas Corporation, Inc.
2955 Red Hill Avenue, Costa Mesa, CA
92626-5923, USA
Version This document applies to IFS POE201-EX POE
Extender version 1.0.
Certification N4131
FCC compliance Class A: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.
ACMA
compliance
Notice! This is a Class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
European Union
directives
2004/108/EC (EMC directive): Hereby, UTC Fire
& Security declares that this device is in
compliance with the essential requirements and
other relevant provisions of Directive 2004/108/EC
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.
Contact
information
www.utcfireandsecurity.com or
www.interlogix.com
Customer support www.interlogix.com/customer-support
IFS POE201-EX POE Extender User Manual i
Contents
Package Contents 1
Product Features 1
Product Overview 2
Port Connections 3
In Port 3
Out Port 3
LED Indicators 3
Hardware Installation 4
Before Installation 4
Power Source Equipment (PSE) Installation 4
Powered Device (PD) Installation 5
Multiple PoE Extender Installation 6
Specifications 8
Contacting Technical Support 9
IFS POE201-EX POE Extender User Manual 1
Package Contents
Thank you for purchasing the IFS POE201-EX IEEE 802.3af
High Power over Fast Ethernet Extender.
Open the package containing the IFS POE201-EX and
carefully unpack it. The box should contain the following items:
●POE201-EX x1
●User Manual x1
If any of these items are missing or damaged, please contact
your dealer immediately. If possible, retain the product box
including the original packing material to return it to for
repair/replacement.
Product Features
• Complies with IEEE 802.3af Power over Ethernet
• Extends the range of PoE an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to a remote
device
• Auto-detection of POE IEEE 802.3at equipment and
devices to prevent damage caused by incorrect installation.
• Multiple units can be daisy-chained for extended distance
(max. 3 units)
• No external power required
• Compact size, Wall-mountable design
• Plug-and-Play installation
2 IFS POE201-EX POE Extender User Manual
Product Overview
Figure 1 shows the front and side panels of the POE201-EX.
Figure 1: POE201-EX Front and Side Panels
IFS POE201-EX POE Extender User Manual 3
Port Connections
In Port
Connect the PoE IN port from following 802.3af PSE type
devices through a CAT-5e/6 UTP cable:
• PoE injector
• PoE Injector Hub
• PoE Ethernet Switch
• Another POE201-EX
Out Port
Connect the PoE OUT port to following 802.3af PD type
devices through a CAT-5e/6 UTP cable:
• PoE IP Camera
• PoE VoIP Phone
• PoE Wireless AP
• PoE Splitter
• Another POE201-EX
LED Indicators
POE201-EX LED indicators
LED Color Function
PoE IN Green Lights to indicate that the port is receiving
power.
LNK/ACT Green
Blink
Lights to indicate the port is link up.
Blink: Indicates the data activity through device.
PoE OUT Green Lights to indicate that the device is providing
power.
4 IFS POE201-EX POE Extender User Manual
Hardware Installation
The POE201-EX operates at two different data rates – 10Mbps
and100Mbps in the same device and automatically adjusts
based on the speed of incoming connection.
The following section describes the hardware features of the
POE201-EX. Carefully read this section before connecting any
network device to this unit.
Before Installation
It is recommended to check the network environment before
the installation. The POE201-EX conveniently extends the
distances in an installation base by transferring power to the
remote PDs. (Powered Devices).
The POE201-EX is installed between the PSE (Power Source
Equipment) and the PD (Powered Device); it is powered by
PSE and forwards the Ethernet data and remaining POE
power to the PD. The POE201-EX doesn’t require an external
power supply and it can be installed easily just plug and play;
that means the operator does not need to configure the
POE201-EX. The POE201-EX injects power to the PDs
without affecting the data transmission performance. It offers a
cost effective and quick solution to extend power and data for
an additional 328 ft. (100m).
Note: The POE201-EX can be installed with third-party
devices as long as the connected device complies with the
IEEE 802.3af standard.
Power Source Equipment (PSE) Installation
1. Connect a standard Cat5e/6 UTP cable from Power Source
Equipment (PSE), such as PoE Switch, PoE Injector hub or
a single port PoE injector, to the “IN” port of POE201-EX.
Inhaltsverzeichnis
Andere ifs Extender Handbücher
