Igel ONE Bedienungsanleitung

IGEL Thin Clients

IGEL one

Initial Setup of the Thin Client

1 General Information

IGEL one is the entry device of the IGEL thin client family, designed for SMB and Soho environments

without the need for central management. The IGEL one offers su ort for one single rotocol, which

is chosen during the initial boot. Thus makes the IGEL one the erfect end device for server-based

com uting in small homogeneous environments.

These brief setu instructions will introduce you to the feature set of IGEL one and hel you with the

quick set u of your clients. You will find more detailed information on the sytems' configuration in the

IGEL user instructions for linux thin clients.

2 Before you begin

Before connecting your IGEL one terminal, lease check whether the following eri heral devices and

services are available:

•1x VGA monitor

•1x Keyboard PS/2 or USB

•1x Mouse USB

•1x 10/100 UTP network connection

You can connect any VGA monitor to your IGEL terminal. The device can be connected to a PS/2 or

USB keyboard and a USB mouse.

IGEL one can be o erated on all ower networks with voltages of 100V to 250V (50Hz-60Hz). The

connection to a socket with overload rotection is recommended.

Your IGEL terminal is equi ed with a 10/100 UTP auto sensing ort for ethernet network

connections. If needed, you can set the transfer rate in the network setu of your IGEL terminal to

10Mb/s or 100Mb/s (Setu → Network → Advanced).

The device is re-configured for using DHCP, so if a DHCP server is available in your network no

changes on the network configuration of the client are necessary.

3 Un ack the terminal and set u the hardware

Your terminal comes in reusable ackaging. We recommend to retain the ackaging for any ossible

returns to your su lier or for an exchange under warranty.

Please bolt together the terminal and its base for u right o eration and take care of adequate

ventilation of the device. An o tional VESA mount (wall/monitor mount) is available for IGEL one.

Connect the UTP ethernet network cable to the ethernet jack of your terminal. Do not connect any

other ty e of cable (such as a tele hone cable) to this jack, as this could cause serious damage.

Carefully connect the monitor cable to the video out ut jack to avoid bending contact ins. The use of

screws to secure the video lug to the terminal is recommended.

Note: Connection cables of com uter com onents and eri heral units equi ed with a USB interface

must not be connected while the units are under ower. Hot lugging of non-USB units can lead to

serious damage.

4 Boot IGEL one

The boot rocedure will last for only a few seconds and during this time the IGEL startu image is

dis layed along with a rogress bar. While booting, a series of services and settings is initiated,

including the network configuration. If your network is configured for the use of DHCP, no changes

are required

5 Choose a digital service

IGEL one is a 'single service device' - only

one of the digital services can be configured

and used on the client. A list of services

available on IGEL one is dis layed during the

initial boot of the client (see icture).

Select one of the services and confirm your

choice by clicking on button OK. The device

will finish the boot rocedure and IGEL one is

ready to use.

A change of the service available with IGEL

one requires a total reset to factory defaults.

6 The IGEL Linux deskto

The IGEL linux deskto will be dis layed with a task bar at its bottom and showing the A lication

Launcher rogram to start your a lication (session). A lication Launcher also gives information on

your IGEL roduct such as hardware and firmware information and allows to u date, shutdown or

restart the device.

IGEL Setu rogram can be started from the A lication Launcher to configure the terminal’s basic

settings (dis lay, keyboard etc.) and define user sessions (de ending on the digital service chosen

before). Basic system settings in the setu are described in the following.

7 GUI-Language (User Interface → Language)

Choose your language and configure 'Tool Ti s' (useful windows with hel information on setu

arameters showing u when mouse cursor is ointing at a arameter).

8 Keyboard and mouse (User Interface → In ut)

Set a keyboard layout and configure some arameters such as character re eat rate and numlock

behavior. You can set additional keyboard layouts and switch between layouts using hotkeys.

Configure your mouse for left hand mode and set the mouse s eed.

9 Dis lay arameters (User Interface → Dis lay)

Set screen resolution and frequency (default is 800x600 at 60Hz), configure screen saver and ower

management (DPMS). Before selecting a higher resolution or refresh rate, make sure this mode is

su orted by your monitor.

10 Network arameters (Network)

When using DHCP, your network settings have been configured automatically during the system boot.

You can change network arameters manually on this setu age.

11 Save changes

Clicking Save in the setu a lication will save changes made before to the IGEL one configuration

file. Clicking OK will not only save your settings but also terminate the setu rogram and let the new

settings become active.

12 Initiate a session (Sessions)

De ending on the digital service available on your device, you can define sessions within the setu

a lication (e.g. using ICA or RDP).

Once you have initiated a session, you can start it with IGEL A lication Launcher, clicking the

corres onding deskto icon, choosing session from start menu or dro down menu. A session can be

configured to run automatically after system start as well.

13 Reset to factory defaults

Restart the terminal and ress ESC key as soon as the note 'booting, lease wait...' is dis layed. This

will resent a menu roviding 5 o tions to control the boot rocess:

•Quiet Boot – Normal boot sequence

•Verbose Boot – Dis lays each ste of the startu sequence

•Emergency Boot – Only IGEL Setu rogram is available

•Reset to Factory Defaults – Restoration of the original status

•Failsafe with CRC check – Booting to linux system after file system check

In case an administrator assword for the terminal setu has been set, you will be rom ted to logon

before you are allowed to reset the terminal.

Please contact our su ort de artment with any questions.

Evaluation Su ort Hotline

EMEA: +49 (0) 421 52094 2222

UK: +44 (0) 118 340 3400

E-Mail: su [email protected]

Note: The term, 'session' is used in a general sense to designate server connections and a lications

running locally on your thin client. In rinci le, every a lication started on your device is called

‘session’ - e.g. a local linux shell or Firefox browser.

Note: Reset to Factory Defaults will set all arameters to their default values, all settings and sessions

made before will be lost after the reset and the initial setu rocedure has to be re eated.

Inhaltsverzeichnis

Andere Igel Server Handbücher

Igel

Igel zero hdx Bedienungsanleitung

Igel

Igel UD7 Series Bedienungsanleitung

Igel

Igel H850C Bedienungsanleitung

Igel

Igel UD3 Series Bedienungsanleitung

Igel

Igel UD2 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung