Ignition Xo8 LED Fx Strobe Bedienungsanleitung
Xo8 LED Fx Strobe IP65 800W
stroboscope
User manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
15.02.2018, ID: 421761 (V2)
Table of contents
1 General notes............................................................................................................................ 4
1.1 Further information........................................................................................................ 4
1.2 Notational conventions................................................................................................. 4
1.3 Symbols and signal words........................................................................................... 4
2 Safety instructions................................................................................................................. 6
3 Features....................................................................................................................................... 8
4 Installation................................................................................................................................. 9
5 Starting up............................................................................................................................... 11
6 Connections and controls................................................................................................ 12
7 Operating................................................................................................................................. 14
7.1 Starting the device....................................................................................................... 14
7.2 Main menu...................................................................................................................... 15
7.2.1 Operating mode ‘DMX’............................................................................................ 19
7.2.2 Operating mode ‘Slave’........................................................................................... 19
7.2.3 Operating mode ‘Stand-alone’............................................................................. 19
7.3 Menu overview.............................................................................................................. 20
7.4 Functions in 2-channel DMX mode........................................................................ 20
7.5 Functions in 4-channel DMX mode........................................................................ 21
7.6 Functions in 9-channel DMX mode........................................................................ 22
7.7 Functions in 26-channel DMX mode..................................................................... 24
8 Technical specifications.................................................................................................... 27
9 Plug and connection assignments............................................................................... 28
10 Troubleshooting................................................................................................................... 29
11 Cleaning.................................................................................................................................... 30
12 Protecting the environment........................................................................................... 31
Table of contents
Xo8 LED Fx Strobe IP65 800W 3
stroboscope
1 General notes
This manual contains important instructions for the safe operation of the unit. Read
and follow the safety instructions and all other instructions. Keep the manual for
future reference. Make sure that it is available to all those using the device. If you sell
the unit please make sure that the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are
subject to change.
1.1 Further information
On our website (www.thomann.de) you will find lots of further information and
details on the following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the
topics of interest for you quickly.
Online guides Our online guides provide detailed information on technical
basics and terms.
Personal
consultation For personal consultation please contact our
technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words
that are used in this manual.
Letterings
Displays
General notes
4Xo8 LED Fx Strobe IP65 800W
stroboscope
Signal word Meaning
DANGER! This combination of symbol and signal word indicates
an immediate dangerous situation that will result in
death or serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates
a possible dangerous situation that can result in death
or serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates
a possible dangerous situation that can result in mate-
rial and environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
Warning – danger zone.
General notes
Xo8 LED Fx Strobe IP65 800W 5
stroboscope
2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED tech-
nics. The device is designed for professional use and is not suitable for use in house-
holds. Use the device only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in per-
sonal injury or property damage. No liability will be assumed for damages resulting
from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intel-
lectual abilities and having corresponding knowledge and experience. Other persons
may use this device only if they are supervised or instructed by a person who is
responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the
like) from the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Hazardous voltage
The wiring, as well as all maintenance and repair work on the electrical
installation of the device must only be performed by qualified electrical
personnel. Failure to do so may result in electric shock and risk of fire
and loss of life.
Before starting work on the electrical installation, the device must be
turned volt-free.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Never remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are
missing or damaged.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
Intended use
Safety
Safety instructions
6Xo8 LED Fx Strobe IP65 800W
stroboscope
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive
persons should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any
direct heat source. Keep the device away from naked flames.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet)
matches the voltage rating of the device and that the AC outlet is pro-
tected by a residual current circuit breaker. Failure to do so could result
in damage to the device and possibly injure the user.
Unplug the device before electrical storms occur and when it is unused
for long periods of time to reduce the risk of electric shock or fire.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC floor
and after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use
felt-pad floor protectors or a carpet.
Safety instructions
Xo8 LED Fx Strobe IP65 800W 7
stroboscope
3 Features
Special features of the device:
n4 separately controllable white light LED segments (each 200 W)
n32 RGB LEDs for the backlight
nStand-alone and DMX mode operation (4 different modes)
nEasy operation via display and buttons on the unit
nBuilt-in automatic show programmes
nMaster / Slave mode
nRugged aluminium housing
nProtection class IP65 allows outdoor operation
n2.4 GHz W-DMX module for wireless DMX control
Equipment with protection class IP65 are dust-tight and completely protected
against contact (first code number). They are also protected against splash water
from any angle (second code digit). That is why this equipment can also be used out-
doors. Event technology equipment is generally only designed for temporary use
however (event lighting) and not for permanent use outdoors.
The specified protection class does not make a statement about the weather resist-
ance of the equipment (resistance to changing ambient conditions as well as against
the effects of sunlight and UV rays).
The seals and screw connections of the equipment must be checked regularly to
ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due
time.
Information about protection class
IP65
Features
8Xo8 LED Fx Strobe IP65 800W
stroboscope
4 Installation
Unpack and carefully check that there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the device against vibration,
dust and moisture during transportation or storage use the original packaging or
your own packaging material suitable for transport or storage, respectively.
DANGER!
Hazardous voltage
The wiring, as well as all maintenance and repair work on the electrical
installation of the device must only be performed by qualified electrical
personnel. Failure to do so may result in electric shock and risk of fire
and loss of life.
Before starting work on the electrical installation, the device must be
turned volt-free.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules
that apply in your country. Always secure the device with a secondary
safety attachment, such as a safety cable or a safety chain.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a
safe and stable position and that the weight of the device does not
exceed the maximum permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
Installation
Xo8 LED Fx Strobe IP65 800W 9
stroboscope
The quick lock openings on the housing bottom are used for secure attachment of
the supplied Omega brackets. Here you can attach the flight adapters (such as the
supplied C-hooks). The safety rope must pass through the notches on the bottom
case as shown in the following figure.
You can install the unit in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved truss.
Always work from a stable platform whenever installing, moving or servicing the
unit. In doing so, the area underneath the unit must be cordoned off.
1 Quick lock openings for Omega brackets
2 Openings for safety cable
Mounting options
Installation
10 Xo8 LED Fx Strobe IP65 800W
stroboscope
Inhaltsverzeichnis
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung