IHome IBT16 Bedienungsanleitung

iBT16

instruction manual

iBT16 IB

Size: 153mm x 120mm

Printing color: Black

Nov 28, 12. P1

Portable Rechargeable

Bluetooth Speaker

iBT16

Introduction

Thank you for purchasing the iHome iBT16. This product is designed to provide high quality wireless

sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.

Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic

operation and care of the unit. Please read them carefully and keep for future reference.

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other

protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,

such as benzene, thinner or similar materials can damage the surface of the unit.

Maintenance

iBT16

FCC Information

FCC ID: EMOIBT16

IC: 986B-IBT16

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

This Device complies with RSS-102 of the IC Rules; Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may cause undesired operation.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF

exposure, users can obtain Canadian information on RF exposure and compliance.

QDID:B020340

iBT16

Table of Contents

Meet Your iBT16 ........................................................................................................... 1-2

Charging the Unit.............................................................................................................3

Using Bluetooth:Pairing Your Device .....................................................................................4

Playing Audio Via Bluetooth................................................................................................5

Playing Audio Via Aux.......................................................................................................6

Internal Rechargeable Lithium-ion Battery...............................................................................7

Consumer Product Safety Guide....................................................................................... 8-9

Troubleshooting..............................................................................................................10

Warranty......................................................................................................................11

Meet Your iBT16

iBT16

Power Off/Bluetooth/Aux Switch

Aux-out Jack

Power/Charging/Pairing

Indicator Light

Micro USB Charging/

Audio-in Port

Back

iBT16

Included

• iBT16 system

• Micro USB to USB/3.5 mm audio cable

iBT16

Using the

Charging the Unit

1.Connect the micro USB plug to the micro USB

charging port on the back of the unit.

2.Connect the standard USB plug end of the

cable to a power USB port on a computer or

other USB charging device. For first time use,

charge unit for about 8 hours.

3.The Power/Charging/Pairing Indicator Light

on the back of the unit glows red steadily

while the unit is charging and turns OFF

once the unit is fully charged. If unit is not

powered on when micro USB plug is

connected, the red light glows steadily to

indicate unit is charging.

NOTE: When the unit is on and not connected to a

power source, the Power/Charging/Pairing Indicator

Light flashing red means the battery needs charging.

USB 2.0

iBT16

Using the

Using Bluetooth: Pairing Your Device

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s

user manual.

2. Move the Power OFF/Bluetooth/Aux Switch on the unit to the Bluetooth position (center). The unit

will turn on and attempt to auto link to a previously paired device for 10 seconds, indicated by a 3

note tone and the Power/Charging/Pairing Indicator Light on the back of the unit flashing blue. If

a linked device is found, the indicator will glow solid blue.

3. If no linked device is found, the unit will enter pairing mode, indicated by a 2 note tone and the

Power/Charging/Pairing Indicator Light on the back of the unitwill flash blue and red while the unit

attempts to pair. NOTE: If the unit is charging while pairing is attempted, the light will continue to glow

red (it will not blink blue and red). “iBT16” should appear on your device’s menu. If “Not Connected”

or similar appears on your display, tap on the “iBT16” to begin pairing. If your device asks for a

password, enter 1234 on the keyboard of your device. If no device is paired within 2 minutes, a

tone will sound and the unit will revert to auto link mode. To retry pairing, move the Power

OFF/Bluetooth/Aux Switch to the OFF position (left) then move it back to the Bluetooth position

(center).

Once paired with a device, the

Power/Charging/Pairing Indicator Light on the back of the unit

will

glow blue steadily. There should be an indication on your device that pairing is complete. On some

devices, you must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once

paired, your device should link to the iBT16 whenever within range.

Playing Audio Via Bluetooth

Pairing with a Different Device

iBT16

Using the

1. Move the Power OFF/Bluetooth/Aux Switch to the Bluetooth position (center) to listen to

audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

The Power/Charging/Pairing Indicator Light on the back of the unit will flash blue and a 3

note tone will sound as the unit searches for a previously paired device, and then turn solid

blue once a previously paired device is detected.

2. Use the controls on your device to play or pause audio, navigate tracks and control volume

from your Bluetooth device.

3. When done listening, move the Power OFF/Bluetooth/Aux Switch to the OFF position (left)

to turn the unit off.

1. When you power ON the speaker, it will automatically link with the previously paired

Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with

a different device you must turn off the Bluetooth capability of the already paired device.

iBT16

Using the

Playing Audio via Aux In

Playing Audio via Aux Out

P10

1. Move the Power OFF/Bluetooth/Aux Switch to the Aux position (right) to listen to audio via aux in.

The Power/Charging/Pairing Indicator Light on the back of the unit will glow blue.

2. Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the

3.5 mm audio plug to the headphone or line-out jack on your audio device.

3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks

and control volume.

4. When done listening, move the Power OFF/Bluetooth/Aux Switch to the OFF position (left) to turn

the unit off. Remember to turn off your audio device, too.

You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to

expand the audio playing in Bluetooth or Aux-in modes.

1. Connect a 3.5 mm audio cable plug to the Aux-out jack on back of the unit and connect the other

end to the line-in jack on your external speaker. Note that the aux output signal is mono.

2. Move the Power OFF/Bluetooth/Aux Switch to the Bluetooth position (center) or Aux position (right)

to listen to audio via the selected mode.

3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks

and control volume.

4. When done listening, move the Power OFF/Bluetooth/Aux Switch to the OFF position (left) to turn

the unit off. Remember to turn off your audio device, too.

Andere Handbücher für iBT16

Inhaltsverzeichnis

Andere iHome Sprecher Handbücher

iHome

iHome iDM14 Bedienungsanleitung

iHome

iHome iAVS16 Bedienungsanleitung

iHome

iHome Baby iZ44 Bedienungsanleitung

iHome

iHome iZBT5 Bedienungsanleitung

iHome

iHome SB-M66P Bedienungsanleitung

iHome

iHome iBN24 Bedienungsanleitung

iHome

iHome iBT10 Bedienungsanleitung

iHome

iHome iBT371 Bedienungsanleitung

iHome

iHome iBT33v3 Bedienungsanleitung

iHome

iHome iBN16 Bedienungsanleitung

iHome

iHome PLAYTOUGH X iBT300 Bedienungsanleitung

iHome

iHome iH19 Bedienungsanleitung

iHome

iHome iBT682 Bedienungsanleitung

iHome

iHome iBT16 Bedienungsanleitung

iHome

iHome nickelodeon TM-M66D Bedienungsanleitung

iHome

iHome iBT67 Bedienungsanleitung

iHome

iHome iBT68 Bedienungsanleitung

iHome

iHome iHPA-1500LT Bedienungsanleitung

iHome

iHome IDM12 Bedienungsanleitung

iHome

iHome iBT55 Bedienungsanleitung

iHome

iHome iW1 air series Bedienungsanleitung

iHome

iHome iDM8 Bedienungsanleitung

iHome

iHome iBT56 Bedienungsanleitung

iHome

iHome IDM12 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung