IHP H5861 Bedienungsanleitung

LOG SET

MODEL VINTAGE™

INSTALLATION INSTRUCTIONS FOR INSTALLING A LOG SET.

FOR USE WITH VINTAGE™ GAS STOVES

775271M

Rev. A, 11/2013

HEARTH PRODUCTS

KITS AND ACCESSORIES

KIT CONTENTS

1 ea. Rear Log

1 ea. Left Front Log

1 ea. Right Front Log

1 ea. Straight Twig

1 ea. Instruction sheet

TOOLS NEEDED

None

GENERAL INFORMATION

If you encounter any problems, need clariﬁcation of these instructions

or are not qualiﬁed to properly install this kit, contact you local distribu-

tor or dealer.

Read this instruction sheet in its entirety before beginning the installation.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND

OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO

THESE INSTRUCTIONS.

TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL

BEFORE PROCEEDING.

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

Vintage™ Log Set

Cat. No. Description

H5861 Log Set

Misc. Firebox Accessories (sold separately)

H5863 Bag of Volcanic Stone

H5864 Bag Of Glowing Embers (rockwool)

H5865 Bag of Steel Wool

INSTALLATION INSTRUCTIONS

If logs are not installed according to the log installation instruc-

tions, ﬂame impingement and improper combustion could

occur and result in soot and/or excessive production of carbon

monoxide (CO), a colorless, odorless, toxic gas.

The size and position of the log set is critical to achieve a safe,

reliable and attractive ﬂame pattern. Any attempt to use a

different log set in the ﬁreplace will void the warranty and will

result in incomplete combustion, sooting and poor ﬂame quality.

Step 1. Open the glass door per the instructions in the installation and

operation manual provided with the appliance.

Step 2. Remove the logs from the box and carefully unwrap them. The

logs are fragile so handle them with care.

Step 3. Align the holes in the bottom of the rear log (the longest log in

the set) with the two pegs just to the rear of the rear burner tube

and slide the log down onto the pegs (Figure 1). The charred

black surface of the log should face the front.

Figure 1

fire-parts.com

P/N 775271M REV. A 11/2013 1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

IHP reserves the right to make changes at any time, without notice, in design, materials,

speciﬁcations, and prices, and also to discontinue colors, styles, and products. Consult your

local distributor for ﬁreplace code information.

Step 4. The left front log has two pegs protruding from the top surface

(Figure 2). The charred black with white highlights surface of

the log should be facing forward. Slide this log down onto the

left front and center front pegs.

Step 5. The right front log (positioned with the black charred surface

towards the front) should be placed on the peg protruding from

the right end of the left front log and the remaining peg at the

right end of the metal log support panel (Figure 2).

Step 6. The remaining straight twig has two holes in the bottom. Position

the twig so the black and white charring is to the front and slide

the holes over the peg in the left front log and the peg in the rear

log (Figure 3). It may be necessary to roll the top of the rear log

slightly forward to put this twig on the pegs.

Figure 2

Step 7. Figure 4 shows the entire log set assembled. The volcanic stone

provided with the appliance (or sold separately) may be placed

one high in front of the front burner tube using care not to cover

all the burner ports. Any extra volcanic stone may be placed at

the ends of the front log, off the burner. Place small pinches of

glowing embers (rockwool) on top of the volcanic stone.

Figure 3

Pilot Viewing

Volcanic

Stone

Figure 4

Note the location of the hole for viewing the

pilot light. When the pilot is burning, a

blue ﬂame can be seen through

this hole.

fire-parts.com

Dieses Handbuch passt für folgende Modelle

Andere IHP Kaminzubehör Handbücher

IHP

IHP RDV-BRK-STD Bedienungsanleitung

IHP

IHP STK-LIN60-B KIT Bedienungsanleitung

IHP

IHP PCBE-325 Bedienungsanleitung

IHP

IHP FP4125-BDVI32 Bedienungsanleitung

IHP

IHP FBK-LIN Bedienungsanleitung

IHP

IHP GCKSMS557051NP Bedienungsanleitung

IHP

IHP WINSLOW PS40 Bedienungsanleitung

IHP

IHP PCBE-42 Bedienungsanleitung

IHP

IHP DRFTWD-LOG60 Bedienungsanleitung

IHP

IHP CDFBBK-35 Bedienungsanleitung

IHP

IHP RDV-CONTF-BLK Bedienungsanleitung

IHP

IHP HeatFlo Kit Bedienungsanleitung

IHP

IHP WS-CI150 Bedienungsanleitung

IHP

IHP Montebello Series Bedienungsanleitung

IHP

IHP Envy AKC-CLS-DLSCNV Bedienungsanleitung

IHP

IHP RDV-CONTF-BLK Bedienungsanleitung

IHP

IHP SECURE FLEX SF-12 Bedienungsanleitung

IHP

IHP BNZN Bedienungsanleitung

IHP

IHP GCK-LS Bedienungsanleitung

IHP

IHP H5872 Bedienungsanleitung

IHP

IHP F2624 Bedienungsanleitung

IHP

IHP HeatFlo Kit HTFLO-LIN60 Bedienungsanleitung

IHP

IHP DWLS-RNCL35 Bedienungsanleitung

IHP

IHP PCBE-36 Bedienungsanleitung

Beliebte Kaminzubehör Handbücher anderer Marken

Valor

Valor L2 1700K Bedienungsanleitung

Exodraft

Exodraft Xzense Bedienungsanleitung

Whalen

Whalen Ruso MNFP62BF23-6 Bedienungsanleitung

Lopi

Lopi Hearthview 864 Bedienungsanleitung

Woodstock Soapstone

Woodstock Soapstone Fireview 201 Bedienungsanleitung

EdilKamin

EdilKamin SERBATOIO 250 Kurzanleitung

Bronpi

Bronpi KIT-1 Bedienungsanleitung

Town & Country Fireplaces

Town & Country Fireplaces 22150051 Bedienungsanleitung

Travis Industries

Travis Industries 33 DVI Bedienungsanleitung

Superior

Superior ASD3628-TI Bedienungsanleitung

pleasant hearth

pleasant hearth OFP28WG Bedienungsanleitung

Firegear

Firegear FG-H-2110SS Bedienungsanleitung

Nibe

Nibe Contura C i31 Bedienungsanleitung

kozy heat

kozy heat KZK-052 Bedienungsanleitung

SimpliFire

SimpliFire SF-WM36 Bedienungsanleitung

Bluegrass Living

Bluegrass Living BC18NR Kurzanleitung

pleasant hearth

pleasant hearth IRIS SCROLL Bedienungsanleitung

Cooke

Cooke Glass Wind Guard Bedienungsanleitung