iiNet Budii Lite Bedienungsanleitung
Internet and Entertainment Hub
Quick Start
Guide
Start here!
3
Welcome to Budii Lite®
This guide provides easy, step-by-step instructions on
setting up your new hardware and getting online.
If you’re just here for a refresher course on getting
connected to your wireless network, skip to page 18.
If you’re online but still need to get your VoIP
Netphone service set up, head to page 28.
Need a full User Manual?
Once you’re online with the instructions in this guide,
you can download the full Budii Lite®User Manual from:
• iinet.net.au/hardware/budii/support/or
• westnet.com.au/hardware/budii/support
Budii Lite®Checklist
Before you get started, check that the following items are in your box along with your Budii Lite®modem.
Budii Lite®
Power Phone Cable Line Ethernet Wireless
Pack x 2 Filter Cable Antenna x 2
A EDB C
4 F
Got NBN?
If you’ve got any kind of NBN or other fibre
service, then you’ll have an additional blue
ethernet cable instead of 2 x phone cables
and a line filter.
Getting Started
You’ll need to get Budii Lite®plugged in according to which type of internet service you have.
Which internet service do you have?
ADSL1/ADSL2+ Broadband
You have a copper landline connected to
your house with an active phone service.
Hop to page 6.
Naked DSL Broadband
You have a copper landline connected
to your house, but it’s been stripped of
a phone service to function only as an
internet line. Skip to page 8.
NBN, HFC or other Fibre Internet
You have NBN Fibre, NBN Wireless, HFC
or any other kind of fibre service. There’s
an NBN box or another kind of fibre unit
installed in your home that you need to
connect to. Jump to page 10.
NBN Satellite
You have a satellite modem, and you
just want Budii Lite®to take care of the
wireless internet in your home.
Flip to page 10.
If you want to use Budii Lite®as a Wi-Fi router for your Mobile Broadband service, you’ll find a handy guide at:
iinet.net.au/hardware/budii/support/
5
Physical Setup
Setting up Budii Lite® for ADSL1/ADSL2+ Broadband
6
ADSL
LINE
PHONE
Line Filter
Phone Socket
Phone Cable
Power Cable
Handset
Power Button
Antennas Slots
To learn how to install
the antennas and why
you should use them,
see page 34.
A
B
D C
Phone Cable
You’ll need an additional
phone cable to connect a
third-party handset.
1. Use the power cable A to connect Budii Lite®
to an electrical outlet.
Don’t turn him on until you’ve finished plugging in the other cables.
2. Plug phone cable B into the ADSL2+/VDSL2 port, located to the left of
the four black sockets.
3. Plug the other end of phone cable B into the ADSL socket on the line
filter.
4. Standard phone services: If your home phone is currently plugged into
the phone socket on your wall, plug it into the PHONE socket on the
line filter instead (use phone cable C if necessary).
Netphones (VoIP): Plug one end of phone cable C into the light green
PSTN port and the other end into the PHONE socket on the line filter.
This will allow a handset to receive both Netphone and home phone
calls.
Plug your handset into the black Netphone port with an additional
phone cable (not supplied).
5. Plug the line filter cable D into the telephone socket on the wall.
6. Almost done; you can put away any unused cables, but you’ll need
ethernet cable E if you plan to make a wired connection to a computer.
Turn Budii Lite®on using the power button and then go to page 12 to
learn how to get online.
3
2
4
1
7
Setting up Budii Lite® for Naked DSL
Phone Cable
Power Cable
Phone Socket
Power Button
Handset
A
B
C
Antennas Slots
To learn how to install
the antennas and why
you should use them,
see page 34.
Phone Cable (optional)
8
1. Use the power cable A to connect Budii Lite®
to an electrical outlet.
Don’t turn him on until you’ve finished plugging in the other cables.
2. Plug phone cable B into the ADSL2+/VDSL2 port, located to the left of
the four black sockets. Plug the other end of phone cable B directly into
the phone socket on your wall (do not use the line filter).
3. Netphones (VoIP/iiTalk): Plug your handset into the black Netphone
port using phone cable C.
4. Almost done; you can put away any unused cables, but you’ll need
ethernet cable E if you plan to make a wired connection to a computer.
Turn Budii Lite®on using the power button and then go to page 12 to
learn how to get online.
2
1
9
Setting up Budii Lite® for NBN or Fibre
Don’t power up Budii Lite®until you’ve finished plugging in the other cables.
ADSL PHONE
Fibre unit or
smart socket
Power Button
Power Cable
Ethernet Cable
A
F
Antennas Slots
To learn how to install
the antennas and why
you should use them,
see page 34.
10
Andere Handbücher für Budii Lite
1
Inhaltsverzeichnis
