Ikan Rayden Bedienungsanleitung

QUICKSTART GUIDE

RW5

Rayden Daylight Half x 1 LED Light

RB5

Rayden Bi-Color Half x 1 LED Light

RW10

Rayden Daylight 1 x 1 LED Light

RB10

Rayden Bi-Color 1 x 1 LED Light

CHECKED BY

What’s Included

1 x Light Fixture

1 x Yoke Mount

1 x Remote Control

1 x Power Supply w/ Cable

1 x AB Mount Battery Plate

1 x V-Mount Battery Plate

Getting to know your RAYDEN lights

PRECAUTIONS:

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use only the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting service department at

ikancorp.com.

• Keep the unit clean and free of dust. The unit can be cleaned with a soft dry cloth.

• Use only parts provided by the manufacture.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a Stand:

The Rayden LED Light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily

sit and adjust on any stand. The 30° yoke gives the light free-range motion without obstructions. The Baby

5/8

" and Junior 1-1/8" Combo Pin allows the user a wide range of stands. The light can be mounted either

horizontally or vertically on a 5/8" baby pin.

Power the LEDs:

The Rayden light comes with an included AC power supply and 6 foot cable. This allows the user to plug

into any standard 120-240v electrical outlet. The Rayden LED light can be powered from either an AB

Mount pro battery, or a V-Mount battery. The ﬁxture comes standard with either AB-Mount or V-Mount

plates. The plates can be easily removed and replaced for the type of batteries that are available.

Adjusting the Color & Brightness of the Light:

The Rayden LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was

designed with the idea that it could be reached and adjusted when the light is up on a stand. The knob

has three push settings.

1. The default setting is the brightness from 10%-100% brightness.

2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)

Remote Control

The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights

to be connected as well as control of the brightness.

Optional Accessories

Some other products that work well with the RW10 available from Ikan include:

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Remote Control Button Functions

• Press & Hold “A” for 5 seconds to sync remote control to light(s)

• Press “A” to power ON/OFF (for Daylight Light only)

• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)

• Press “B” to adjust 4 levels of light intensity in increments of 25%

• Press and Hold “C” & “D” for 5 seconds to Enable/Disable sound

• Hold down “C” to increase light intensity 0%-100%

• Hold down “D” to decrease light intensity 100%-0%

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate.

Once the screws are removed, separate the plate from the back of the ﬁxture.

Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process.

Plug the wired 2-pin connector into the ﬁxture where we just unplugged the Gold-Mount

plate at the back of the light. Orient the holes on the plate to match up with the screw holes

on the back of the ﬁxture. Using the screws supplied with the V-Mount plate, screw in the

plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

Speciﬁcations

RW5

Rayden Daylight Half x 1 LED Light

Specs

Head Type Daylight 5600K

Rating 36.4w ; 14-18VDC

Light Source 608 0.06 watt LEDs

Power Supply Input: 110-220VAC ; Output:15VDC @ 4.0A

Lens 45°

Beam Angle 50°

Yoke & Pin 30° Angled yoke w/ Baby 5/8” & 11/8” Combo Pin

Fixture Size 18 x 16 x 6 In.

Fixture Weight 9 lbs

RB5

Rayden Bi-Color LED Half x 1 Light

Speciﬁcations

Specs

Head Type Bi-Color 5600K-3200K

Rating 36.4w ; 14-18VDC

Light Source 608 0.06 watt LEDs

Power Supply Input: 110-220VAC ; Output:15VDC @ 4.0A

Lens 45°

Beam Angle 50°

Yoke & Pin 30° Angled yoke w/ Baby 5/8” & 11/8” Combo Pin

Fixture Size 18 x 16 x 6 In.

Fixture Weight 9 lbs

RW10

Rayden Daylight 1 x 1 LED Light

Speciﬁcations

Specs

Head Type Daylight 5600K

Rating 71w ; 14-18VDC

Light Source 1184 0.06 watt LEDs

Power Supply Input: 110-220VAC ; Output:15VDC @ 4.0A

Lens 45°

Beam Angle 50°

Yoke & Pin 30° Angled yoke w/ Baby 5/8" & 11/8" Combo Pin

Fixture Size 21 x 18 x 6 In.

Fixture Weight 13 lbs

RB10

Rayden Bi-Color 1 x 1 LED Light

Speciﬁcations

Specs

Head Type Bi-Color 5600K-3200K

Rating 71w ; 14-18VDC

Light Source 11874 0.06 watt LEDs

Power Supply Input: 110-220VAC ; Output:15VDC @ 4.0A

Lens 45°

Beam Angle 50°

Yoke & Pin 30° Angled yoke w/ Baby

” & 1

” Combo Pin

Fixture Size 21 x 18 x 6 In.

Fixture Weight 13 lbs

Learn More

More dynamic information at ofﬁcial website: www.ikancorp.com

Support

Contact: [email protected] | 713.272.8822

CONDITIONS OF WARRANTY SERVICE

•

Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

•

The components and maintenance service fee will be charged if the warranty period is expired.

Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)

•

Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

•

Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ikan Beleuchtungsausrüstung Handbücher

Ikan

Ikan LWX20 Bedienungsanleitung

Ikan

Ikan CB8 Bedienungsanleitung

Ikan

Ikan S series Bedienungsanleitung

Ikan

Ikan MYLO MB-2H1Q Bedienungsanleitung

Ikan

Ikan LB5-2PT-KIT Bedienungsanleitung

Ikan

Ikan Stryder Bedienungsanleitung

Ikan

Ikan LSC-004 Bedienungsanleitung

Ikan

Ikan LS-575PE Bedienungsanleitung

Ikan

Ikan Piatto Lights PL60 Bedienungsanleitung

Ikan

Ikan Lightstar LSC-008 Bedienungsanleitung

Ikan

Ikan LEDLITE-180-DMX Bedienungsanleitung

Ikan

Ikan WS-F200 Bedienungsanleitung

Ikan

Ikan Lyra Bi-Color LBX20 Bedienungsanleitung

Ikan

Ikan MB4-2PT-KIT Bedienungsanleitung

Ikan

Ikan ID508-v2 Bedienungsanleitung

Ikan

Ikan Stryder SW-IP100 Bedienungsanleitung

Ikan

Ikan CB6-2PT-KIT Bedienungsanleitung

Ikan

Ikan HS-PT700-UGK Bedienungsanleitung

Ikan

Ikan LYRA Bedienungsanleitung

Ikan

Ikan lightstar LSW-003 Bedienungsanleitung

Ikan

Ikan Lightstar LSP-002 Bedienungsanleitung

Ikan

Ikan LS-4000E Bedienungsanleitung

Ikan

Ikan LW5-3PT-KIT Bedienungsanleitung

Ikan

Ikan IB500 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung