IKEA UPPLEVA Bedienungsanleitung

UPPLEVA

ENGLISH 4

DEUTSCH 11

FRANÇAIS 18

NEDERLANDS 25

Safety

•Pregnant women and people who have heart

problems should not use the 3D glasses.

•Watching 3D TV is not recommended for children.

•Do not use the 3D glasses for purposes other

than specied.

•Watching 3D images for an extended period of

time may cause headache or eye strain. If you

feel any discomfort, stop viewing 3D TV and rest

for a while.

•Anyone who has had a seizure, loss of awareness,

or other symptom linked to an epileptic condition,

or has a family history of epilepsy, should contact a

medical professional before using the 3D function.

Care instructions

•Do not place the 3D glasses in a location exposed

to direct sunlight, re, heat or water. This may

cause the 3D glasses to malfunction.

•When cleaning the 3D glasses, gently wipe with

a dry and soft cloth. Make sure that you remove

any dust or dirt from the cloth rst.

•The 3D glasses may not work properly due to

the interference from magnetic uorescent light

(50Hz/60Hz), we recommend you turn off the light

when you watch 3D TV.

ENGLISH

Disposal of your old product and

batteries

The crossed-out wheeled bin symbol indicates that

the item should be disposed of separately from

household waste. The item should be handed in for

recycling in accordance with local environmental

regulations for waste disposal.

By separating a marked item from household waste,

you will help reduce the volume of waste sent to

incinerators or land-ll and minimize any potential

negative impact on human health and the environment.

For more information, please contact your IKEA store.

Product overview

Preparation

Inserting or replacing the battery

Replace the battery when the LED

indicator blinks continuously.

Power/mode button

LED indicator

Battery cover

Pairing the 3D glasses with your TV

This product uses RF (radio frequency) technology. To

prevent interference from other TVs, the 3D glasses

need to be paired with your 3D TV the rst time they

are used. After pairing, the 3D glasses receive the 3D

signal of the paired TV only. You can use the glasses

with another TV if you pair them with it. You will need

to pair them again if you want to use them with your

original TV.

How to pair your glasses with your TV:

1. Turn on the TV, then set the TV to 3D mode (refer

to the TV manual).

2. Press and hold the Power/mode button on the 3D

glasses for 6 seconds. The LED indicator will blink

if pairing has started. When pairing is in progress,

the LED indicator blinks continuously. The LED

indicator will turn itself off when the pairing is

successful. If the pairing has failed, the LED

indicator will keep blinking until the 3D glasses

enter standby.

3. The 3D glasses will begin to function if the pairing

is completed. You will notice the dark tint of the

lenses changing.

Using your 3D glasses

•Power on/off (standby): Press the Power/mode

button. The LED indicator will blink once when the

3D glasses are powered on and ready to receive a

signal. Press and hold the button for 6 seconds to

enter standby mode.

•There are three modes for the 3D glasses: 3D

mode, right eye mode and left eye mode. 3D

mode is the default mode and is used when

watching TV. The right and left modes are used

for gaming. They let two players use the whole

screen at the same time (each player sees only

their own dedicated screen).

Notes:

•Ensure your TV and the 3D glasses are no farther

than 1 meter apart from each other while pairing is

in process. Power off any other TVs that are located

within 3 to 5 meters, or exit their 3D mode to avoid

pairing the wrong 3D TV.

•Complete step 1 and 2 within 60 seconds, otherwise,

the 3D glasses will enter standby mode automatically.

The 3D glasses will enter standby if no signal is

available within 60 seconds.

•If the pairing procedure has failed, there may be

no signal from the transmitter or there may be a

problem with the signal. Check you are following all

the instructions and try again.

•Pairing might be needed again after TV is repaired.

•Make sure your battery is not discharged.

1. Press Power/mode briey to set the glasses to 3D

mode.

2. In 3D mode, press Power/mode for 1s to set the

glasses to left eye mode.

3. In left eye or right eye mode, press Power/

mode for 1s to switch between left eye and right

eye modes. Press Power/mode for 6s to set the

glasses to standby.

Troubleshooting

There is no 3D effect after the 3D glasses are

powered on:

•Make sure the 3D glasses are less than 6 metres

away from the TV.

•Make sure the TV is in 3D mode.

•Check if the pairing is completed or not by

pressing and holding Power/mode for 6 seconds.

•Replace the battery if it is discharged.

The 3D image is ashing or ickering:

•The battery is nearly discharged. Replace it with

a new one.

•There is light interference around, such as

strong magnetic uorescent light (50/60Hz). If

interference happens, turn off the light.

Specications

Model number: GX21AE

Product name: 3D glasses

Product type: shutter

Synchronization mode: radio frequency

Weight: about 26g

Working current: <1mA

Power supply: 3V Li/MnO2 Battery (CR2025)

Working temperature: 0°C ~ 40°C

Storage temperature: -5°C ~ 45°C

Recommended viewing distance: 2 - 6m

Note:

For the purpose of performance improvement,

design and specications are subject to change

without notice.

Andere Handbücher für UPPLEVA

Inhaltsverzeichnis

Sprachen:

Andere IKEA 3D-Brille Handbücher

IKEA

IKEA UPPLEVA Bedienungsanleitung

Beliebte 3D-Brille Handbücher anderer Marken

Sony

Sony BKM-30G Bedienungsanleitung

Samsung

Samsung Gear VR SM-R322 Bedienungsanleitung

Segula

Segula 50546 Bedienungsanleitung

LG 360 VR Bedienungsanleitung

Wicked3D

Wicked3D eyeSCREAM Bedienungsanleitung

Eyedaptic

Eyedaptic EYE5 Bedienungsanleitung

Silhouette

Silhouette TITAN DESIGN Montageanleitung

Soundcore

Soundcore Frames Bedienungsanleitung

Wiseup

Wiseup GL2000 Bedienungsanleitung

Eschenbach

Eschenbach MaxTV Bedienungsanleitung

Mini Gadgets

Mini Gadgets GLSun720 Bedienungsanleitung

Happy Electronics

Happy Electronics Mindroid Glasses Bedienungsanleitung

BASETech

BASETech 1456965 Bedienungsanleitung

YEAZ

YEAZ SUNUP Bedienungsanleitung

Dimensional Optics

Dimensional Optics Active 3D Bedienungsanleitung

xelux

xelux Smartglass I3 LED Bedienungsanleitung

Cyclopital3D

Cyclopital3D HD3D View-Vaster Bedienungsanleitung

Panasonic

Panasonic TY-EP3D10EB Bedienungsanleitung