Ikegami HDL-45 Bedienungsanleitung

HDL-45

Ikegami picture quality

in a very compact and affordable package

3CCD Multi-Purpose HDTV Camera

Native format Capability

It provides outstanding picture quality in native format using either 1080i CCDs or 720p CCDs.

Advanced full digital process ASIC

Incorporating an advanced full digital process IC, precision designed at 0.18um rule, the video

signals are digitized with 14-bit A/D conversion and up to 38-bit internal digital process circuits.

Digitizing white shading, gamma, and other correction processes in the camera head achieves

superb picture quality and high reliability.

Chip C4 DSP ASIC, originally developed for HDK-series cameras, incorporates advanced color

reproduction and detail enhancement features, including Skin DTL.

Lower noise when gain up

Employing a low-noise feed-back type amplifier circuit in Master gain up, as well as, providing noise cancel circuits in all video related

boards, eliminates noticeable noise and obtains a better signal-to-noise with high gain up.

Various External Sync support

In addition to HDTV Tri-Sync signal, SDTV BBS signal can be used as an external sync signal for genlock.

Extended system flexibility

FE-C140SE fiber extension system and MCB-40 multicore system are available as options, providing

extended system flexibility for a wide range of video production demands.

Full Remote Control

The HDL-45 has full remote control capability from the complete range of Ikegami remote control

panels. With matching pictures, the HDL-45 works with the same OCPs and control systems as

Ikegami's HDK studio cameras.

The latest 14-bit A/D conversion

14-bit A/D converters provide precise picture images from dark to highlight areas,

especially maximizing the color gradation for dark areas, achieving natural color

reproduction in black.

Compact and Light Weight Construction

Weighing less than 4 lbs., various applications are possible including traffic & weather

camera, overview camera on a pan & tilt head, under-water craft, airborne use,

surveillance, and POV (Point Of View) applications for accurate capture from lively

exciting angles in the field.

Built-in Servo Filter / ECC (Electronic Color Compensation) filter

The 4-position Optical Filter can be remotely controlled from a remote control panel.

Adopting ECC filter (3200k/5600k) gives proper white balance without reducing sensitivity, a benefit under high color temperature but

low light conditions such as dawn and dusk. The ND filter and ECC filter can be independently controlled.

The HDL-45 Multi-purpose Compact HDTV Camera provides superior

picture images with the latest 14-bit A/D converters,

and is suitable for various applications such as news flash camera,

weather camera, POV camera, and more........

*Except for EU Market

Rear Panel

FE-C140SE / FE-B100A Fiber Extension System

The fiber extension system transmits HD-SDI, genlock, control, intercom, and microphone audio up to

500m (or up to 2Km with an additional separate power supply) on SMPTE hybrid fiber cable.

The OCP-200 / MCP-200 is a new Network based

control panel system offered as an alternate to the

traditional Ikegami style control panels. The Arc-

net system allows any OCP-200 to control any

camera with assignment set at the OCP itself.

System wiring is simplified with control of up to 96

cameras via a single coax cable between CCU

locations and video control locations. The OCP-200

and MCP-200 include touch screen LCDs. The

depth-of-control of the OCP-200 can be selected

from basic to complete to fit the customers'

operating discipline. Conventional one by one

camera control connection is also available.

Advanced Network Control System

Large Viewfinder support

Fiber System Diagram

For manned operation, a large studio viewfinder such as 5" B/W CRT

VF or 9" color LCD VF can be mounted on the FE-C140SE adapter.

Note:

*1: RS-422/RS-232C serial data interface is provided for Prompter or Pan/Tilt system.

*2: External +12VDC power must be provided at the camera side for extending cable length more than 500m.

*3: When SD-RET is selected, there is no RET-SDI output at CA side.

*4 : Due to transmission of one RET channel over the camera cable, RET-1/RET-2 is switched at CA.

HDL-45

OCP-200

MCP-200

BSH-200

Front

Rear

CPH-200

Front

Rear

3CCD Multi-Purpose HDTV Camera

Intercom System

Reference Sync

HD SDI

Digital Swer.

WFM

OCP Operation

Prompter

HEADSET

FE-C140SE

FE-B100A

TALLY BOX (op)

MIC (op)

VF (op)

SD RET

Source (SD:VBS)

HD RET

Source (HD:SDI)

Program Audio

Source

with TALLY SYSTEM

INTERCOMAUDIO OUT (ANALOG)

HD-SDI OUT-3

HD-SDI OUT-2

RET VIDEO OUT (SD-VBS)

RS422 or RS232C

HD-SDI

OUT-1

RS422 or

RS232C

Fiber Cable Max.500m

(w/ Separate Power Max 2,000m)*2

TALLY OUT

(EMBEDDED AUDIO DEMUX)

PGM IN (INTERCOM)

REF IN

SD RET-1.2 IN*4

Remote Control

Panel

Prompter

ESC / CB

HD TRI SYNC or SD BBS

(ANALOG)

HDL-45 Camera Ratings&Performance

Scanning System

CCD Image Sensor

Optical System

Lens Mount

Sensitivity

S/N

Optical Filter

Ambient Operating Temperature

Operating Humidity

Power requirement

Power consumption

Weight

Dimensions

1080 lines 2:1 interlaced (59.94Hz) or 720 lines 1:1 non-interlaced (59.94Hz)

2/3-inch 2.3Mega pixel AIT 1080i CCD (HDL-45A)

2/3-inch 2.2Mega pixel IT 1080i CCD (HDL-45i)

2/3-inch 1Mega pixel IT 720p CCD (HDL-45P)

2/3-inch 3CCD, f/1.4 prism

2/3-inch Bayonet(B4) (Conforms to BTA S-1005B)

F11(HDL-45A),F8(HDL-45i),F10(HDL-45P) at 2000lx, white reflection rate 89.9%

56dB (HDL-45A), 54dB(HDL-45i), 56dB (HDL-45P)

ECC 3200K / 5600K select

-10℃+45℃(+14°F ~ +112°F)

30% ~ 90% (non-condensing)

+12VDC (+11 ~ +16VDC)

Approx. 19W

1.8kg (3.97 lbs)

W90 x H103 x D180mm (W3.54 x H4.06 x D7.09 inches)

12 34

ND 100% 25% 6.2% 1.6%

FE-C140SE Camera Adapter Ratings&Performance

Transmission

Video Trunk signal

Transmission Distance

Input Signals

Output signals

Ambient Operating Temperature

Weight

Dimensions

HD-SDI SMPTE292M 1.485Gbps, 1 channel

HD-SDI SMPTE292M or NTSC VBS, 1 channel

500m or 2000m with an additional separate power supply

Audio signal :-60 / -40 / -20 / 0dBm, 600Ωbalanced, 2 channel

Intercom signal :-60dBm, 1 channel

Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)

Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)

RET signal (SDI) :HD-SDI SMPTE292M, 1 channel (75ΩBNC)

RET signal (Analog) :HD-Y ch: PS 1.0Vp-p or NTSC VBS: VS 1.0p-p, 1 channel (75ΩBNC)

Phase reference :Tri-Sync 0.6Vp-p (BNC)

Audio PGM :0dBm, 600Ωbalanced, 1 channel (XLR-3pin M)

Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)

Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)

-10℃~ +45℃(+14°F ~ +112°F) [Humidity 30% ~ 90%, non-condensing]

Approx. 4.5kg (9.9 lbs), excluding HDL-45, VF.

W148 x H198 x D280mm (W5.83 x H7.8 x D11.02 inches)

FE-B100A Base Station

Input Signals

Output Signals

Weight

Dimensions

RET signal (HD) :HD-SDI SMPTE292M (75ΩBNC)

RET signal (SD) :NTSC VBS (75ΩBNC)

Phase reference :Tri-Sync 0.6Vp-p or BBS 0.3Vp-p, 2-channel (75ΩBNC) (HD/SD auto detection)

Intercom signal :-60dBm, 1 channel

Audio PGM :0dBm, 600Ωbalanced, 1 channel (XLR-3pin M)

Intercom signal :+10dBu max.

Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)

Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)

Main Video :HD-SDI SMPTE292M 1.485Gbps, 4 channel (75ΩBNC)

Audio signal :+4dBm, 600Ωbalanced, 2 channel

Intercom signal :+10dBu max.

Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)

Approx. 4.4kg (9.7 lbs)

W214.6 x H77.5 x D351.5mm (W8.85 x H3.05 x D13.84 inches)

Design and specifications are subject to change without notice.

H125B083-MK1.5 Printed in Japan

Certified

JQA-0773

ISO 9001

IKEGAMI ELECTRONICS (U.S.A.), INC.

HEADQUARTERS 37 BROOK AVENUE, MAYWOOD, NJ 07607

Phone:(201) 368-9171 Fax:(201) 569-1626

WESTCOAST OFFICE 2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278

Phone:(310) 297-1900 Fax:(310) 536-9550

SOUTHWEST OFFICE 773 BEARDEN WAXAHACHIE,TX 75167 Phone:(972) 869-2363 Fax:(972) 556-1057

MIDWEST OFFICE 747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:(630) 834-9774 Fax:(630) 834-8689

SOUTHEAST OFFICE 5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:(954) 735-2203 Fax: (954) 735-2227

Certified

JQA-EM3888

ISO 14001

URL http://www.ikegami.com

Ratings&Performance

3CCD Multi-Purpose HDTV Camera

HDL-45

Andere Ikegami Filmkamera Handbücher

Ikegami

Ikegami HDL-50 Bedienungsanleitung

Beliebte Filmkamera Handbücher anderer Marken

ZEISS IKON

ZEISS IKON Contessa 35 Bedienungsanleitung

ECLAIR

ECLAIR NPR Bedienungsanleitung

Sharp

Sharp VC-C10PN Bedienungsanleitung

Hitachi

Hitachi DK-H100 Bedienungsanleitung

Polaroid

Polaroid SL92 Bedienungsanleitung

Canon

Canon Sure Shot Z115 Bedienungsanleitung

Minolta

Minolta ZOOM 70 Bedienungsanleitung

Canon

Canon EOS 1000 F Bedienungsanleitung

Minolta

Minolta SR-T 102 Bedienungsanleitung

Kodak

Kodak KB 22 Bedienungsanleitung

ALPA

ALPA 10d Bedienungsanleitung

Minolta

Minolta MAXXUM 450SI - PART 2 Bedienungsanleitung

Minolta

Minolta Maxxum 8000i Bedienungsanleitung

Leica

Leica M6 TTL Bedienungsanleitung

Canon

Canon F-1 Bedienungsanleitung

Horizon Fitness

Horizon Fitness 202 Bedienungsanleitung

FujiFilm

FujiFilm GW690 2 Fehlerbehebungshandbuch

Minolta

Minolta DYNAX 7 Montageanleitung