Ikegami SDR-301 Bedienungsanleitung

SDR-301

Instruction Manual

Digital Recorder

Model

Introduction

Connection Basic

Operation Setting Others

Advanced

Operation

Convenient

Function

Make sure all the accessories are supplied together.

SDR-300

Viewer

Install

Guide

SDR-300Viewer

InstallCD-ROM

ACCord

AC120V NTSC

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the pres-

ence of important operating and maintenance (servicing) instructions in the literature accom-

panying the appliance.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

CAUTION;

ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPON-

SIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIP-

MENT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Introduction Connection

Basic

Operation

Advanced

Operation

Convenient

Function

Setting Others

Introduction

Thank you very much for purchasing the digital recorder.

Be sure to read this manual and understand the functions of this equipment before using it and operate the equipment

properly.

Precautions in Handling (1)

Precautions in Handling

This equipment uses a hard disk. Because giving an impact or vibration to

it will cause a failure, take great care in handling it.

1. Installation Place and Handling

◇Be sure to unplug the equipment before performing installation work.

◇There are high-voltage portions in the equipment. Do not open the case, or a danger will be posed.

◇Install the equipment in a place where the ambient temperature will be within the rating and condensation

will not occur. The relation between temperature and humidity is as shown below. Follow the rating in

using the equipment.

◇Do not block or cover the vent hole in the main body.

◇The power supply voltage should be within the rating.

◇Because giving an impact or vibration will cause flaws or a hard disk failure, take great care in handling

the equipment.

◇Do not install the equipment in a place where it will be exposed to direct sunlight or high temperatures

produced by a heater etc.

◇Do not install the equipment in a place where it will be exposed to strong magnetic fields or radio waves.

◇If this equipment is installed next to wireless applications such as TV sets and radios, poor reception may

be caused.

◇Connect the ground terminal to a ground for safety.

◇Do not move this equipment with the power turned ON.

◇Do not unplug the equipment during recording or playing.

2. Recording on Hard Disk

◇Be sure to record images and sounds on the hard disk beforehand and check that they have been recorded

normally.

◇If images and sounds are not recorded or played normally due to an equipment failure etc., allow us not to

make compensation for the data. If the hard disk should fail, data recovery cannot be performed.

◇Save your important data on your PC using the accompanying SDR-300 Viewer.

Temperature Humidity

30°C --------------------- About 80%

35°C --------------------- About 65%

40°C --------------------- About 45%

Precautions in Handling (2)

Precautions in Handling

3. Copyright

◇Take great care when recording images etc. that are copyrighted.

4. Consumable

◇The hard disk and radiating fan are consumables. When replacing them, contact the distributor from

which you purchased this product. (They are supplied for pay even during the warranty period.)

◇As a guideline, replace the hard disk about every 20,000 hours.

※This replacement interval is just for your reference, but does not necessarily guarantee the product

performance.

Checking of Accessories

Qty

◇AC cord ………………………………………………………………………………………………… 1

◇Instruction manual ……………………………………………………………………………………… 1

◇SDR-300 Viewer Install CD-ROM ……………………………………………………………………… 1

◇SDR-300 Viewer Install Guide ………………………………………………………………………… 1

Introduction Connection

Basic

Operation

Advanced

Operation

Convenient

Function

Setting Others

How to Read the Instruction Manual

Various symbols and terms shown in this instruction manual are described briefly below.

◇Description of Titles

In this manual, the function descriptions are classified under the following seven titles to be shown on the far-right

portion of a page, which allows you to find the desired description easily.

[Introduction] It covers the precautions in handling, general description of features and names of parts.

[Connection] It describes the method of connecting cameras, alarm signals, etc. to this equipment.

[Basic operation] It describes the basic method of operation such as recording, playing and searching.

[Advanced operation] It describes the operating method for fully utilizing the functions of this equipment.

[Convenient function] It describes the functions that can be used conveniently.

[Setting] It describes the setting menu hierarchical structure and function.

[Others] It describes the method of copping with trouble and the specifications.

◇Description of Symbols

It indicates the number of the page on which the item to be referred to is described.

A tip on or an example of the relevant function is shown in a balloon.

The precautions in handling are described.

Cursor buttons on front panel

Press the buttons to move the cursor up and down as well as right and left.

It represents a highlighted item on he setting menu.

When this symbol is shown, the setting data is selected.

In this state, the setting data cannot be changes. To make it possible to change the

setting data, press the ENTER button to make the item flash.

It represents a flashing item on the setting menu.

When this symbol is shown, the setting data can be changed.

◇Description of Terms

Hard Disk (HDD) It is a storage medium on which images and sounds are to be recorded.

Basic

Operation

Introduction

Precautions in Handling

Checking of Accessories

How to Read the Instruction Manual

Contents

From Connecting to Operating

From Connecting for Manual Recording to Operating…………………………… E-1

From Connecting for Alarm Recording to Operating …………………………… E-1

From Connecting for Timer Recording to Operating …………………………… E-1

General Description ……………………………………………………………… E-2

Features …………………………………………………………………………… E-2

Names and Functions of Parts

Front Panel ……………………………………………………………………… E-4

Rear Panel ………………………………………………………………………… E-5

Screen Display …………………………………………………………………… E-6

Basic Connecting Method

Connecting the Camera and Monitor …………………………………………… E-7

Advanced Connecting Method

Connecting the Alarm and I/O Terminals………………………………………… E-8

Connecting the Uninterruptible Power Supply Unit……………………………… E-9

Connecting a multiplexer ………………………………………………………… E-10

Connecting the RS-232C ………………………………………………………… E-11

Connecting to the Network ……………………………………………………… E-12

Turning on the Power Supply ………………………………………………… E-13

Turning off the Power Supply ………………………………………………… E-14

Cursor Button (Up, Down, Left and Right) and Time Setting …………… E-15

Before Recording

Repeat Recording ………………………………………………………………… E-17

One-Pass Recording ……………………………………………………………… E-19

Initialization of Hard Disk ……………………………………………………… E-21

Before Manual Recording………………………………………………………… E-23

Before Alarm Recording ………………………………………………………… E-25

Before Timer Recording ………………………………………………………… E-27

Detailed Setting of Recording Operation ………………………………………… E-29

Recording Method

Manual Recording………………………………………………………………… E-32

Recording Started at Alarm Input………………………………………………… E-34

Timer Recording ………………………………………………………………… E-36

About Detailed Operation of Timer ……………………………………………… E-39

Contents (1)

Introduction

Connection

Introduction Connection

Basic

Operation

Advanced

Operation

Convenient

Function

Setting Others

Contents (2)

Playing Method

Playing and Other Playback ……………………………………………………… E-40

Block Playing …………………………………………………………………… E-41

Search Method

Block Search ……………………………………………………………………… E-42

Time Search ……………………………………………………………………… E-44

Alarm Search …………………………………………………………………… E-46

Image Display

Setting the Camera Title ………………………………………………………… E-48

Recording

Recording Started before Alarm Input …………………………………………… E-51

(Pre-alarm Recording)

Recording

Playing While Recording ………………………………………………………… E-53

(Simultaneous Recording and Playing)

Display

Displaying and Non-Displaying of Icons and Characters ……………………… E-56

Changing the Display Positions of Icons and Characters ………………………… E-58

List of Display Positions of Icons and Characters ……………………………… E-59

Front Panel Lock

About Locking of Operating Switches …………………………………………… E-60

I/O Terminal

About External Input Terminal…………………………………………………… E-61

About External Output Terminal ………………………………………………… E-62

About Trigger Setting of Alarm Input Signal …………………………………… E-63

Illustration: About Trigger Setting of Alarm Input Signal and Alarm Output …… E-64

Remote Control From PC

About Serial Communication Control …………………………………………… E-65

About Serial Communication Specifications …………………………………… E-66

Network function

Setting the IP Address …………………………………………………………… E-68

Setting the Client Disconnection Time…………………………………………… E-70

Setting the DNS Server…………………………………………………………… E-71

Setting for Mail Sending (SMTP Account) ……………………………………… E-73

Registering the Mail Address to which Alarm Mail is to be Sent ……………… E-75

Registering the Network Remote Monitoring User ……………………………… E-77

Registering the Network Remote Monitoring Administrator …………………… E-80

Basic

Operation

Advanced

Operation

Setting

Other Operations

Viewing the images recorded via multiplexer in the network …………………… E-82

Adjusting the Clock ……………………………………………………………… E-84

Detailed Operation Checking by Use of Logs …………………………………… E-85

Description of Various Operation Logs ………………………………………… E-86

System Information ……………………………………………………………… E-88

Setting the Recording Operation at Power-On …………………………………… E-89

Initializing all the Data on the Setting Menu to the Ex-Factory Settings ………… E-90

SHIFT Function

Convenient Function Using SHIFT ……………………………………………… E-92

Alarm Operation

Convenient Function Concerning Alarm Operation……………………………… E-93

Setting Menu

Setting Menu……………………………………………………………………… E-94

List of Screens …………………………………………………………………… E-95

About Information ……………………………………………………………… E-100

About Recording ………………………………………………………………… E-101

About Display …………………………………………………………………… E-103

About Control …………………………………………………………………… E-104

About Network …………………………………………………………………… E-105

About Time ……………………………………………………………………… E-106

About Initialization ……………………………………………………………… E-107

In Case of Trouble

Check the Log if Anything is Wrong with the Equipment ……………………… E-108

Recording is not Performed in Spite of the Timer being Programmed ………… E-108

No Characters or Icons are Displayed …………………………………………… E-108

The Timer Mode cannot be Canceled …………………………………………… E-108

The Pre-Alarm Mode cannot be Canceled ……………………………………… E-108

The Front Panel cannot be Operated……………………………………………… E-108

The Operation of the Equipment is Stopped Due to a System Malfunction……… E-108

Troubleshooting …………………………………………………………………… E-109

Specifications……………………………………………………………………… E-110

Appearance Drawing …………………………………………………………… E-111

Recording Time Chart …………………………………………………………… E-112

Contents (3)

Convenient

Function

Others

– E-1 –

Introduction Connection

Basic

Operation

Advanced

Operation

Convenient

Function

Setting Others

The basic flow from connecting to playing is described item by item below.

From Connecting for Manual Recording to Operating

Title Item Step Sub-item Page

Connection Basic Connecting Method 1 Connecting the Camera and Monitor E-7

Turning on the Power Supply 2 Turning on the Power Supply E-13

Cursor Button (Up, Down, Left and Right) 3 Cursor Button (Up, Down, Left and Right) and E-15

and Time Setting Time Setting

Basic Before Recording 4Repeat Recording E-17

Operation One-Pass Recording E-19

5 Before Manual Recording E-23

6 Detailed Setting of Recording Operation E-29

Recording Method 7 Manual Recording E-32

Playing Method 8 Playing and Other Playback E-40

9 Block Playing E-41

From Connecting for Alarm Recording to Operating

Title Item Step Sub-item Page

Connection Basic Connecting Method 1 Connecting the Camera and Monitor E-7

2 Connecting the Alarm and I/O Terminals E-8

Turning on the Power Supply 3 Turning on the Power Supply E-13

Cursor Button (Up, Sown, Left and Right) 4 Cursor Button (Up, Down, Left and Right) and E-15

and Time Setting Time Setting

Basic Before Recording 5Repeat Recording E-17

One-Pass Recording E-19

Operation 6 Before Alarm Recording E-25

7 Detailed Setting of Recording Operation E-29

Recording Method 8 Recording Started at Alarm Input E-34

Playing Method 9 Playing and Other Playback E-40

10 Block Playing E-41

From Connecting for Timer Recording to Operating

Title Item Step Sub-item Page

Connection Basic Connecting Method 1 Connecting the Camera and Monitor E-7

Turning on the Power Supply 2 Turning on the Power Supply E-13

Cursor Button (Up, Down, Left and Right) 3 Cursor Button (Up, Down, Left and Right) and E-15

and Time Setting Time Setting

Before Recording 4Repeat Recording E-17

One-Pass Recording E-19

Basic 5 Before Timer Recording E-27

Operation 6 Detailed Setting of Recording Operation E-29

Recording Method 7 Timer Recording E-36

Playing Method 8 Playing and Other Playback E-40

9 Block Playing E-41

From Connecting to Operating

– E-2 –

General Description

This equipment is a digital recorder that records images and sounds on a hard disk (HDD).

The simultaneous recording and playing function allows you to play back any camera images during recording.

Because images and sounds are recorded as digital data, high-quality recording and playing can be performed with

minimized deterioration of image quality and recorded images can be searched for instantaneously. By connecting

it with an external multiplexer (frame switcher), it becomes possible to perform multiple recording of images from

several cameras. In addition, this equipment comes with a network function, which enables remote monitoring on

networks.

Features (1)

(1) High-Quality Long-Time Image/Sound Recording

Because this recorder records data on a hard disk, it can perform higher-quality and longer-time recording as

compared with a VTR. In addition, it saves you from having to rewind a tape.

Motion-JPEG is used for video compression. It enables recording and playing of high-resolution images of 640

×240 pixels. Unlike a VTR, no shaky image is seen at the time of freezing. Images and sounds can be recorded

in all recording interval modes.

(2) Instantaneous Search

Three search functions (block search, time search and alarm search) make it possible to play bay target images

instantaneously.

(3) Adoption of Original File System

The adoption of our original file system minimizes random access to the hard disk when digital data is recorded

on it. This lightens the load on the hard disk, improving the reliability and quietness.

(4) Pre-Alarm Recording

The pre-alarm recording function makes it possible to record images and sounds from a point of time up to 5

seconds before an alarm is raised, which allows you to record and check the situation developed before the

occurrence of an abnormal condition. The alarm data before the occurrence of an abnormal condition is stored

in a buffer in memory, which lightens the load on the hard disk.

(5) Simultaneous Recording and Playing Function

This function allows you to play back any camera images without stopping recording. (Simultaneous recording

and playing can be performed when the recording interval is 1/5 to 10 seconds. In this case, sounds will not be

played back.)

(6) Automatic Recording After Recovery From a Power Failure

Even if recording is stopped due to a power failure etc., recording can be restarted automatically after recovery

from a power failure, which prevents omission in recording.

(7) Other Playback

Recorded images can be played back in various modes (forward/reverse playing, forward/reverse single frame

step playing, fast forward/reverse playing and freezing).

Andere Handbücher für SDR-301

Inhaltsverzeichnis

Andere Ikegami Diktiergerät Handbücher

Ikegami

Ikegami SDR-100A Bedienungsanleitung

Beliebte Diktiergerät Handbücher anderer Marken

Sony

Sony ICD-UX533F Bedienungsanleitung

RCA

RCA VR5230 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Benutzerhandbuch

Sony

Sony TCM-400DV Bedienungsanleitung

LogTag

LogTag TREL30-16 Bedienungsanleitung

SVAT

SVAT CVP800 Bedienungsanleitung

Marantz

Marantz PMD620 Bedienungsanleitung

Zoom

Zoom H4next Bedienungsanleitung

Roland

Roland BR-900CD Bedienungsanleitung

JVC

JVC ProHD GY-HMZ1U Bedienungs- und Wartungshandbuch

Panasonic

Panasonic PQT8531-P Bedienungsanleitung

Sanyo

Sanyo TRC-6400 Bedienungsanleitung

Tascam

Tascam DR-07 Bedienungsanleitung

Olympus

Olympus DW-90 Bedienungsanleitung

Sanyo

Sanyo ICR-B150 Bedienungsanleitung

Korg

Korg D4 Bedienungsanleitung

Sony

Sony ICD-SX46 - Ic Recorder Bedienungsanleitung

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Montageanleitung