ikross IKBT14 Bedienungsanleitung
User’s manual
IKBT14 Water Resistant Bluetooth
Sport Headset
Content
Brief introduction…………...…………………………..…...1
1. Bluetooth wireless communication technology……...……………..1
2. About IKBT14…………………………………………………...1
Before use……………………………………………………..2
1.Overview…………………………………………………………2
2. Charging for Headsets……………………………………………3
Using the headsets……………………………………………4
1. Turning on/off the headsets……………………………………...……...4
2. Pairing headsets with Bluetooth devices……………………………….5
1) How to entering pairing mode……………………………………….5
2) Pairing headsets with Bluetooth devices…………………………….5
3) Pairing headsets with Bluetooth transmitter……………………….6
4) Pairing headsets with Multi-devices…………………………..…….7
3. Reconnecting the headsets with devices…………………………...…...7
4. Wearing the headset………………………………………………….…8
5. Making calls with the headset………………………………………….8
6. Playing music……………………………………………………….….10
7. LED indicator…………………………………………………………..11
8. Indication tone………………………………………………………….12
Care and maintenance…………………………………...………..12
FAQs…………………………………………………………………..13
Specification…………………………………………………..……..14
1
Welcome to use this Water-resistant Bluetooth stereo headset, IKBT14.
Please read this user’s manual carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba in May, 1998.
With Bluetooth technology, we can achieve the highest transmission rate
among cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max
radio-communication range of class I can reach up to 100 meters.
2. About IKBT14
IKBT14 is a Water-resistant Bluetooth stereo headset. It support following
Bluetooth profile:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
Profile Description
HSP Headphone earpiece
HFP Related operation of phone call management
A2DP Stereo music playback
AVRCP Remote control music(pause/play/previous track/next track)
You can enjoy music wirelessly by using the IKBT14. Fetures as following:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the headset
Redial last number
Voice dial
Adjust the volume
Switch the conversation between the headset and the mobile phone
Microphone mute during conversation so that confidentiality with the
third party conversation
2
2) Pairing with Bluetooth mobile phone and Bluetooth transmitter which
support A2DP.
Enjoy music wirelessly
Adjust the volume
Remote control pause/ play
Remote control previous/next song
3) Easy to switch between conversation and music, you will not miss the
incoming call during listening to music.
4) Every time the headset is switched on, it will automatically connect to the
last paired device.
5) The headset is designed for water-resistant, it can be worked normally
under the condition of sweat or little rain.
Note: Even though the paired device and headset support the same
Bluetooth profiles, the functions may be different due to the specification
difference of the paired devices.
Before use
1.Overview
3
1 Status indicator light 5 Built-in microphone
2 Charging jack 6 Volume up/previous song
3 Left speaker 7 Multifunction button
4 Right speaker 8 Volume down/next song
2. Charging for Headsets
First time charging：
Before you use this Bluetooth headset, please charge the battery of IKBT14
fully.
Low battery：
When you hear three “DONG” tones every 30 seconds, at the same time, the
red LED blinks twice. It means the battery is low power and need to be
charged.
4
There are two ways of charging for headset:
Using travel charger:
1. Plug charger into standard AC power socket
2. Plug another side of charger jack into charging port of the headset
RED light on→Charging
RED light off→Finish charging
3. It will take about two hours to finish charging
Using USB cable charger:
1. Plug USB cable into USB port of PC
2. Plug another side of USB cable into charging port of the headset
RED light on→Charging
RED light off→Finish charging
3. It will take about two hours to finish charging
Note: Choosing travel charger or USB cable depends on different countries
or areas and actual demands.
Warning:
2) The battery is recyclable.
3) Do not dispose of the battery in fire, as it may cause explosion.
Using the headsets
1. Turning on/off the headsets
Function Operation Indicator light
Turn on Press multi-function button about
3~5seconds and release it till the
blue light blinks
Blue light on 1
second
Turn off Press multifunction button about
3~5seconds and release it till the
red light blinks
Red light on 1
second
5
Note:
The headset will turn off automatically if it can not connect any devices
within 5 minutes after turning on so that it can save power.
2. Pairing headsets with Bluetooth devices
1) How to enter pairing mode
Function Operation Indicator
light
Enter pairing
mode
Make sure the headset is turned
off, if not,please turn it off first.
Press multifunction button about
6~7seconds, and release it till blue
light and red light blink
alternately.
Blue light and
Red light blink
alternately.
Note:
Pairing mode will last 2 minutes, if the headset can not connect any other
devices after 2 minutes, it will switch standby mode automatically.
2) Pairing headsets with Bluetooth devices
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
Please keep the headset and mobile phone within 1 meter when pairing
Make the headsets enter pairing mode(please refer to “How to enter
pairing mode”
Activate your mobile phone’s Bluetooth function and search Bluetooth
devices within available range, and select “IKBT14” from the list of
devices shown after search
6
According to the indication, enter password or PIN No: “0000”, and
press “Yes” or “Confirm” button to confirm
After pairing sucessfully, choose “IKBT14” from the list of device shown
and connect it
After connect sucessfully, headsets’s blue light blinks twice every 4
seconds or blinks three times every 4 seconds
Note:
If the pairing is not successful, please switch off headset firstly, and then
re-pair according to the steps 1-6 mentioned above.
After pairing is successful, the headset and the mobile phone will
remember each other, they will no need to re-pair next time.The headset
can remember 8 paired devices, when the number of paired devices
exceeds 8, the first one will be replaced.
If you want to pair the headset with other devices, please pair it with the
new device according to steps 1～6 mentioned above.
3) Pairing headset with Bluetooth transmitter
You can pairing headset with Bluetooth transmitter to enjoy wirelessly
music. Hereby take BTT001 (Bluetooth transmitter for iPod, not included)
for example. The pairing steps are as follows:
Keep the Bluetooth transmitter and the headset within 1 meter when
pairing;
Make the headset enter pairing mode (please refer to “How to enter
pairing mode);
Plug the Bluetooth transmitter into your cell phone, it will search
Bluetooth device automatically and start pairing;
When the headset requests PIN No., the Bluetooth transmitter will
respond “0000” automatically;
After successful pairing and connecting, blue light of the headset blinks
twice every 4 seconds.
7
Note:
The pairing password of the headset is “0000”. So, the headset can only
pair with a Bluetooth transmitter whose pairing password is “0000”.
If pairing still fails after several tries, please refer to the Bluetooth
transmitter’s user’s manual for further information.
4) Pairing headset with Multi-devices
The headset can connect with two devices at most. One is a Bluetooth
mobile phone supporting HFP profile, the other one is a Bluetooth music
device supporting A2DP profile. If you want to finish the multi-pairing,
please refer to the following steps:
Firstly, pair the headset with a Bluetooth transmitter (please refer to
“pairing the headset with a Bluetooth transmitter);
Turn off the Bluetooth transmitter;
Pairing and connecting the headset with a Bluetooth mobile phone
(please refer to “pairing the headset with a Bluetooth mobile phone”).
Turn on the Bluetooth transmitter, it will connect to the headset
automatically.
Notes:
After successful pairing, the paired devices will remember each other.
Unless pairing information is deleted because of new pairing, they will
no need to pair next time. If the pairing information is deleted, please
connect the mobile phone with the headset first and then switch on the
Bluetooth transmitter, multi-connecting can be performed.
For the mobile phone supporting the HSP and A2DP at the same time. It
may set up HSP and A2DP connection with the headset simultaneously.
At this time, the Bluetooth transmitter may not connect to the headset.
3. Reconnect the headset with devices
1) Connect automatically
After headset is opened, it will try to connect the last connected devices.
8
2) Artificial connect
When the headset not connect HFP device, please double-click
multi-function button, the headset will try to connect the last connected
HFP devices.
When the headset not connect A2DP device, please long press “―” for
two seconds, the headsets will try to connect the last connected A2DP
devices.
4. Wearing the headset
As per the following pictures show, hang the headset on the ears with your
both hands. You must use both hands to put on or take off the headset, don’t
pull or push the headset.
5. Making calls with the headset
1) Basic conversation operation
Function Status of the headset Operation
Cancel call Calling mode Short press multifunction
button once
9
Answer call Ringing Short press multifunction
button once
Reject call Ringing Long press multifunction
button for about 2 seconds
and release it till you listen
prompt tone
End call Conversation mode Short press multifunction
button once
Volume up Conversation mode Short press “+”button
Volume down Conversation mode Short press “―”button
Call transfer to
mobile-phone
Conversation mode Long press multifunction
button for 2 seconds
Call transfer to
headset
Conversation mode Long press multifunction
button for 2 seconds
Microphone
mute
Conversation mode Double-click multifunction
button
Cancel mute Conversation
mode(Microphone
mute)
Double-click multifunction
button
Voice dial Standby mode(have
already connect with
device)
Long press multifunction
button for 2 seconds
Redial last
number
Standby mode(have
already connect with
device)
Double-click multifunction
button
Delete pairing
list
Power off Press multifunction button
and “+”button at the same
time for 8 seconds and
release it till blue light and
red light on at the same time
for 1.5 second
Inhaltsverzeichnis
