iLive IKBFV378S Bedienungsanleitung
User’s Guide for Model IKBFV378S v2018-01
3
SAFETY WARNINGS
• WARNING: To prevent re or shock
hazards, do not expose this unit to rain
or moisture.
• Clean only with a dry cloth. Do not clean
with liquid cleaners or damp cloth.
• Do not use with devices that should not be
used unsupervised.
• CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, USE ONLY INDOORS.
• Do not use in a bathroom or other location
where it may come into contact with water
or splashing.
• WARNING: Where the mains plug
or appliance coupler is used as the
disconnect device, such disconnect
device shall remain readily operable.
• Risk of electric shock. Grounding
continuity must be maintained.
• To prevent injury, this apparatus must
be securely attached to the wall
in accordance with the installation
instructions.
• The Wi-Fi plug may not work properly if
there is radio frequency interference. You
may be required to reset the Wi-Fi plug
should this occur.
FCC WARNINGS
WARNING: To assure continued operation,
follow the attached installation instructions and
use only shield cables when connecting to
other devices. Changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
WARNING: This product can
expose you to chemicals including
lead, which is known to the State of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to: www.
P65Warnings.ca.gov This product
meets and complies with all Federal
regulations.
4
TABLE OF CONTENTS
Introduction - 5
Features
Includes
Overview
Speaker Controls & Inputs - 6
Indicator Lights - 7
Control Functions - 7
Setup
1. Speaker Power - 8
2. Download the Alexa App - 9
3. Download the iLive Wi-Fi App - 9
4. Connect to Wi-Fi - 10
5. Connect to Your Amazon Account - 13
6. Things to Try with Alexa - 15
iLive Wi-Fi App
Music Player Screen - 16
Main Menu Screen - 17
Device List Screen - 18
Multi-room Play - 19
Multi-channel Play with Multiple Speakers - 19
Internet Music Services - 20
Spotify Connect
Listen Out Loud with Spotify Connect - 21
Other Ways to Play
Bluetooth Wireless - 22
Troubleshooting - 23
Customer Support - 24
Contact Information
International Support
Warranty Information
5
INTRODUCTION
Specications, software updates, and third party content are subject to change without prior notice.
Make your home smarter with the Wireless Under Cabinet Speaker with Amazon
Alexa. Link Amazon Alexa with the speaker and ask Alexa to play music, read the
news, check weather, control your smart home and more. Pair up to 6 speakers
together on Wi-Fi for whole home audio or use Bluetooth/Aux In for additional
listening possibilities.
Features
» Voice-activated
» Amazon Alexa cloud-based voice service
» Multi-room and multi-user capable
» Free iLive Wi-Fi app download
» Built-in Wi-Fi
» Supports Bluetooth Wireless - range 33 ft.
Includes
» AC/DC power adapter and cable
» Under cabinet mounting template and hardware
6
PM
SOURCE
DIMMER
WPSVOL +
VOL
DDCC IINN
Speaker Controls & Inputs
OVERVIEW
Speakers
DC Power Port
Cord Wrap PointsUnder cabinet Mounting Points
Main Controls
Mic ON/OFF
Indicator
Microphones x2
Display
Mode/Connection
LED
7
Control Functions
Indicator Lights
» Mode/Connection LED - Alexa Indicators
White - Speaker ON, Amazon Alexa standing by
Blue - Amazon Alexa listening/responding
Red - Amazon Alexa and microphones muted
» Mode/Connection LED
Flashing White (slow) - Wi-Fi Standby Mode
Flashing White (fast) - Connecting to Wi-Fi
Solid White - Connected to Wi-Fi
Flashing Blue (slow) - Bluetooth Standby Mode
Flashing Blue (fast) - Pairing Bluetooth
Solid Blue - Paired to Bluetooth device
» Power/Source
Press power ON, press and hold to power OFF.
Press to switch between Wi-Fi and Bluetooth modes.
» Play/Pause
Short press to play or pause audio playing in the iLive app or on a
Bluetooth connected device.
» Connect Wi-Fi/Pair Bluetooth
In Wi-Fi Mode (white Mode LED), press and hold to begin
connecting to a Wi-Fi network.
In Bluetooth Mode (blue Mode LED), press and hold to begin
pairing to a Bluetooth device.
» Dimmer
Display has two dimmer settings - low and high.
» Alexa ON/OFF
Press to activate Amazon Alexa and say a command. You can
also just say, “Alexa..”, within range of the speaker’s microphones.
Press to mute the microphones and disable Amazon Alexa.
Press and hold for 10 seconds to reset the speaker.
» Volume
Press to adjust the volume up or down. You can also ask Alexa to
set the volume level by saying, “Alexa, set volume to..”.
OVERVIEW
8
DDCC IINN
DDCC IINN
1. Speaker Power
Use the included power cable to connect the DC IN on the rear of the speaker to
a standard power outlet.
SETUP
9
2. Download the Alexa App
Download the Amazon Alexa app to your device by scanning the appropriate QR
code below or search for the Amazon Alexa app in the Google Play™ Store, or
Apple App Store®.
The Amazon Alexa app connects your Concierge speaker to Alexa’s voice services.
It’s also where you see an overview of your requests and manage your contacts,
lists, news, music and settings.
Once downloaded, open the Alexa app and log into your Amazon account. If you do
not already have an Amazon account, choose “Create a new Amazon account” and
enter the requested info. Once logged in, the app will prompt you for setup. You can
add these details now by choosing “Get Started,” or skip these steps and complete
the process later. You cannot use Alexa Voice Services if you aren’t logged
into an Amazon account.
3. Download the iLive Wi-Fi App
Download the iLive app to your device by scanning the QR codes below or search
for the iLive Wi-Fi app in the Google Play™ Store, or Apple App Store®.
The iLive Wi-Fi app lets you play music and audio from streaming services like
Spotify, iHeartRadio and others. It also controls the speaker’s other functions, such
as Multi-room play, Multi-channel play, etc.
Note: This app is designed for mobile devices only, such as smartphones
or Wi-Fi enabled tablets. It is not available for use on regular desktop or
laptop computers.
AppleAndroid
AppleAndroid
10
4. Connect to Wi-Fi
To use the speaker’s Wi-Fi features, the speaker and your mobile device must both
be connected to a Wi-Fi network. The app will guide you through the process, just
follow the on-screen instructions and have your network password ready.
After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below.
Initial Wi-Fi Connection
Note: If you have a dual band wireless router, be sure to connect to the 2.4GHz
band, not the 5GHz band.
1. Press the Power button to power on the speaker. The Mode/Connection LED
may ash multiple colors after rst powering on. This is normal, please
wait for the Mode/Connection LED to begin slowly ashing white, indicating the
speaker is in Wi-Fi Standby Mode.
2. The speaker is now ready for setup. Open the iLive Wi-Fi app on your device
and press “Search”, then “Add Device” (Image A, B, below).
A. B.
SETUP
Inhaltsverzeichnis
Andere iLive Sprecher Handbücher
iLive
iLive ISBW322BU Bedienungsanleitung
iLive
iLive IBR2807DPBLU Bedienungsanleitung
iLive
iLive isb23 Bedienungsanleitung
iLive
iLive ISB180 v2448-01 Bedienungsanleitung
iLive
iLive ITB147B Bedienungsanleitung
iLive
iLive ISBW2116 Bedienungsanleitung
iLive
iLive ISB563B Bluephoria Bedienungsanleitung
iLive
iLive IHB23 Bedienungsanleitung
iLive
iLive ISB200 Bedienungsanleitung
iLive
iLive PLATINUM IHB26B Bedienungsanleitung
iLive
iLive 2687-02 Bedienungsanleitung
iLive
iLive ISB310 Bedienungsanleitung
iLive
iLive ISB225 Bedienungsanleitung
iLive
iLive ISB235 Bedienungsanleitung
iLive
iLive IHB23 Bedienungsanleitung
iLive
iLive Cooler Pro Bedienungsanleitung
iLive
iLive IBR2807DPBLK Bedienungsanleitung
iLive
iLive ISB312 v2906-01 Bedienungsanleitung
iLive
iLive ISP122S Bedienungsanleitung
iLive
iLive ISB718 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung